Rock-N-Roller Multi-Cart R16RT User manual

R16RT Model Specifications Your RocknRoller Multi-Cart shipping box should
contain a frame and the following parts: Recommended Tools For Assembly
Length (Compact) 34” 2 x ½” lock nuts
Length (Extended) 52” 2 x ½" 20 mm flat washer Channel Lock Pliers
(not included)
Width (Frame Bed) 14” 2 x 1⁄₈” x 1 ¼” cotter pins
Width (Rear) 20” 2 x 20 mm flat washer
Height (Folded) 10” 2 x 8”x 3” (200 mm x 75 mm) wheels
Height (Unfolded) 40.5” 2 x 6”x 3” (150 mm x 75 mm) stem casters
Front Casters 6” x 3” 1 x Flat Wrench
Rear Wheels 8” x 3” 1 x Assembly/instruction sheet
Weight 35 lbs.
Load Capacity 600 lbs.
1. Installing Rear Wheels
Gently slide wheel over axle as shown. Do not force
wheels onto axle. It is recommended to lubricate axles
with light grease before installing. Install cotter pins and
bend ends outward.
2. Installing Front Swivel Casters
Carefully insert caster stem into receptor tube and line
up caster stem holes with the receptor tube holes. Stem
should t very snugly in receptor tube. Install cotter pins
and bend ends outward.

Extending Frame
Loosen wingbolts 1/4 turn. Step on
rear axle and push in extension
stop button. Pull up on frame as
shown until stop button engages.
Retighten wingbolts.
Raising Foldable Sides
Firmly press down on release cable
while raising other end of foldable
side as shown.
Repeat with other side.
Cable/headphone
hanger Laptop Shelf Flex Straps