Rock-N-Roller Multi-Cart R12RT User manual

R12RT Model Specifications Your RocknRoller Multi-Cart shipping box should contain a frame and the following parts:
Length (Compact) 34” 1 x 1” (25 mm) square plastic endplugs
Length (Extended) 52” 1 x ¾” (20 mm) square plastic endplugs
Width (Frame Bed) 13.5” 2 x ¼” x 1 ¼” cotter pins
Width (Rear) 20” 2 x ¼” x ¾” cotter pins
Height (Folded) 12” 2 x 35 mm rivert pin
Height (Unfolded) 41.5” 2 x 20 mm flat washer
Front Casters 8” x2.5” 2 x 10”x 3” (254 mm x 76 mm) wheels
Rear Wheels 10” x 3” 2 x 8”x2.5” {203 mm x 64 mm) stem casters
Weight 33 lbs. 1 x Assembly/instruction sheet
Load Capacity 500 lbs.
1. Installing Rear Wheels
Gently slide wheel over axle as shown. Do not force
wheels onto axle. It is recommended to lubricate axles
with light grease before installing. Install cotter pins and
bend ends outward.
2. Installing Front Swivel Casters
Carefully insert caster stem into receptor tube and line
up caster stem holes with the receptor tube holes. Stem
should t very snugly in receptor tube. Install cotter pins
and bend ends outward.

Extending Frame
Loosen wingbolts 1/4 turn. Step on
rear axle and push in extension
stop button. Pull up on frame as
shown until stop button engages.
Retighten wingbolts.
Raising Foldable Sides
Firmly press down on release cable
while raising other end of foldable
side as shown.
Repeat with other side.
Quick Shelf System Solid Deck Cargo
Extension Rack
Cable/headphone
hanger
2 Tier multi-media
shelf Laptop Shelf Flex Straps