Rock Solid Wholesale RS2200 Manual

DIRECTIONS FOR USE
Rock Solid Wholesale, LLC.
RS2200
Portable Ultra Slim Whole Body Vibration Fitness Machine
Please use the product properly, and carefully, for your safety.

1. Safety attention
People who have hypertension, bronchitis, heart or skin disease, diabetes, or other
diseases, or pregnant women, should first consult a doctor before using this product.
Keep children away from this machine
Study the functions (for example, the switch button) and be sure you know how to
operate the machine to avoid malfunction or injury.
To avoid injury and impairment, stamping on the pad is forbidden.
Do not put your knees on the pad to prevent injury and impairment.
Do not put all your weight on one side; otherwise, the machine maybe overturned.
Only one person at a time may use the device.
Do not touch the device with wet hands.
This product is for exercising only. Other uses are prohibited.

2. Schematic product overview
Above cover base foot pad
Moving wheel middle cover plug feet
Time+ Speed window
Time window Receiver window
Time - Speed -
Speed +
Power on auto mode start stop

2. Remote control
Power switch: Press the power switch to start or stop the product
START: Press the start button to start the device
Automatic program: Automatic programs
can be selected (P1,P2,P3).
How to use this program: press power switch button,
machine shows “HA”, which is the manual mode,
Press button ”P”once, the machine enter into auto-mode
Program”P1”. Press button ”P”two times, the machine enters into
auto-program”P2”. Press button “P”three times, the
machine enters into auto-program”P3”. Choose an auto-
program and press the start button. The machine will start
the chosen program. You cannot adjust the time and speed
when you start an auto-program.
Speed+ button: press this buttons to increase the speed as
desired. This button can be used when you use a manual program,
before you press the “start”button (not available with an
automatic program).
Time adjust button: press the “time”button to adjust the time
This button can be used when you use a manual program (not available for automatic
programs).
Speed–button: press this buttons to decrease the speed. This button can be used when you are
using a manual program (not available for automatic programs).
The valid receiving range of the remote control is 2.5M; the infrared light on the remote control
must align with the infrared receiver window on machine.

Whole-body-exercise stance:
Stand on the pad, feet shoulder width apart.
Squatting stance:
Stand on the pad, feet shoulder width apart, while
squatting
Upper body workout:
Place your hands shoulder width apart on the pad,
while on your knees.
Lower leg work out:
Rest your lower legs on the pad with your hands
braced on the ground behind you for support.
Arm workout:
With your feet shoulder width apart, bend at the waist
and stretch your arms straight to rest on the pad.

Single-foot stance:
Put one foot on the pedal and stand relaxed and
straight.
Sitting stance:
Sit securely on the pad with your legs crossed.
Sitting stance II:
Put your legs on the pedal while sitting on a stool.
5. Method of moving
Grasp the product at the edge opposite to the wheel and hold it at a 45-degree angle.
It can then be rolled as needed.

6. Product cleaning and maintenance
Make sure the power is off. The machine can be cleaned with a warm, damp cloth
with detergent. Make sure the machine is completely dry before turning it on again.
Attention:
Be sure not to use benzene, thinner, ethyl alcohol, gasoline etc. which can result in
hazardous fumes, fading of the paint or corroding of the inner parts.
If the machine is not used for a long time, cover it to prevent dust from entering the
machine.
7. Problem solving
Malfunction
Possible reason
Solution
1
Lights are off
Is power supply ok?
Plug in again
Power switch of the appliance off
Turn off to on
Transient current too strong,blown
fuse
Change a new fuse
2
Noise
Is the foot screw level with the
floor?
Adjust foot screw
3
Remote control does not
work
No battery / battery empty
Replace battery
Too far from the machine
Valid range is 2.5M
4
Machine stops while in
use
Machine is overheated
Start again after 10
minutes
5
Does not work as
intended
Received too many commands
Turn off power and
restart
If you still can’t solve the product problem after reading the above-mentioned
content, please contact Rock Solid Wholesale for service. 1-888-476-9995
8. Technical data:
Rated voltage: 220-240VAC Frequency: 0-30HZ
Speed range: 0 to 99 levels
Power: 500W
Amplitude: 0-12 mm
Max Loading: 150kgs / 330lbs