Rockford Fosgate R1-HD4-9813 User manual

A I E
R1-HD4-9813
Serial Number: ____ _
Date of Purchase: ____ _
All manuals and user guides at all-guides.com
all-guides.com

Dear Customer,
Congratulations on your purchase of the world's finest brand of car audio
products. At Rockford Fosgate we are fanatics about musical reproduc-
tion at its best, and we are pleased you chose our product. Through
years of engineering expertise, hand craftsmanship and critical testing
procedures, we have created a wide range of products that reproduce
music with all the clarity and richness you deserve.
For maximum performance we recommend you have your new Rockford
Fosgate product installed by an Authorized Rockford Fosgate Dealer,
as we provide specialized training through Rockford Technical Training
Institute (RTTI). Please read your warranty and retain your receipt and
original carton for possible future use.
Great product and competent installations are only a piece of the puzzle
when it comes to your system. Make sure that your installer is using
100% authentic installation accessories from Rockford Fosgate in your
installation. Rockford Fosgate has everything from RCA cables and
speaker wire to power wire and battery connectors. Insist on it! After all,
your new system deserves nothing but the best.
To add the finishing touch to your new Rockford Fosgate image order
your Rockford accessories, which include everything from T-shirts to
jackets.
Visit our web site tor the latest information on all Rockford products;
www. rockfordfosgate. com
or, in the U.S. call1-800-669-9899 or FAX [phone]. For all other
countries, call +001-480-967 -3565 or FAX [phone].
Table of Content
2 Introduction
3 Specifications
4-5
Design Features
6
Wiring Diagram
7 Installation Considerations
8-10
Installation
Ultra Classic®
Electra Glide®
Street Glide®
Tri Glide®
11-13
Installation
Road Glide®
Road Glide Ultra®
14-15
Installation
All Models
16
Warranty
If, after reading your manual, you still have questions regarding this prod-
uct, we recommend that you see your Rockford Fosgate dealer. If you need
further assistance, you can call us direct at 1-800-669-9899. Be sure to
have your serial number, model number and date of purchase available
when you call.
Safety
This symbol with "WARNING" is intended I.\
to alert the user to the presence of important ili WARNING
instructions. Failure to heed the instructions
will result in severe injury or death.
This symbol with "CAUTION" is intended to I.\
alert the user to the presence of important ili CAUTION
instructions. Failure to heed the instructions
can result in injury or unit damage.
• To prevent injury and damage to the unit, please read and follow the
instructions in this manual. We want you to enjoy this system, not get
a headache.
• If you feel unsure about installing this system yourself, have it installed
by a qualified Rockford Fosgate technician.
• Before installation, disconnect the battery negative (-) terminal to
prevent damage to the unit, fire and/or possible injury.
All manuals and user guides at all-guides.com

Sensi!iv:ty i1W/1M
.
.2in4
(107.4mm)
~
L
t
1.4in
(36.0mm)
!
4.61in
(117.1mm)
8 6in
(219.6mm)
~
@ O@G
0G 0G 0
0@
OQ:l00(Sl0
00>0001[)0
01»00(2)0
@oe?oeGe ~ o @
p R ~ ~ lliiiii:
Specifications
5.24in
(133.0mm)
~
i:l us. !.1
3
All manuals and user guides at all-guides.com

Design Features
Amplifier Mounting Bracket
level Control
Recommended level should be set to -3d B. The level should
be set prior to amplifier installation . Some installations do
not allow for level adjustment access when mounted to the
motorcycle .
4/2 Channel Switch
The bracket is to be used on Road Glide ® and Road Glide
Ultra ® motorcycle fairings only . It mounts to the brake side
turn signal bracket.
4-Channel Amplifier
Fan cooled 4-channel amplifier .
Power Harness Connector
The amp! ifier needs to be switched to the 4-chan nel position
to utilize the factory fader control on the radio .
White , S-pin socket accepts the Power Harness .
~ R1-H04 . ~
Pass- Thru Connector
Accepts additional Rockford amplifier .
._____....____ Speaker Output Harness Connectors
Black , 4-pin socket accepts front Speaker Output Harness
along with the white , 4-pin rear Speaker Output Harness .
: .. LiiB
!HI lit f1JS! 15A PQWEA ~
High-Level Input Harness Connector
Black , S-pin socket accepts the High-Level input Harness
Rubber Amplifier Pad
The rubber amplifier pad is used on Ultra Classic ®, Electra
Gl i de ®, Street Glide ® and Tri Glide ® motorcycle fairing
applications that have the communication module mounted to
the top of the radio .
All manuals and user guides at all-guides.com

Grille Badge
Design Features
2-Way Speaker
Th is Fac tory (OEM) Direct Fi tme nt speaker install s in to the
fact or y speaker grilles No a dap teris need ed.
Standard Spade Connector
The sp adeterminals acc ept both 1 /8" (nega tiv e) and 1/4"
(pos itiv e) co n necto rs fr om th en ew Speake rO ut p ut Ha rn ess
Adh es iv e bac ked Roc kf o rd F osgate b adges a tt ac hto the
fa ctor y spea kergrill ( Ultr aCl ass ic ®, El ec tr aG lid e®, St re et
G
lid e ®, Tri Glid e®O nly )
Power I High-Levellnput Harness
Th e blac k,8-p in co nn ec t or p lugs in to the bl a ck ,8- pin socke ts
l
abe l ed "Po w er" on th eamplif ier Thesma ll er whit e,4-pin
co nn ec torpl ugs int othe whit e, 4 -pi n soc k et la bel ed "Rea r" on
th e amp lifi er Therema ini ng lar ge rc onn ec torp lu gs in to the
wir eha rn ess socket
Speaker Output Harness (Front)
Bl ack ,4-pinh arness pl ugs int o th e bla ck, F ro nt Spea ker
Ou
tp ut 4-p in s oc keton th ea mplifi er
Speaker Output I Input Harness (Rear)
Wh it e,8-pinha rn ess plu gs dir ec tly i nt o th e wh it e, 8-p in
soc ketont he ha rn ess r ou t ed tot he r ea rofthe mo t or cy cl e
All manuals and user guides at all-guides.com

Wir
ing Diagram
Clutch
Side
FRONT
Speaker
Output
Harness
(Front)
Whi
te
8-
Pin
Black
8-Pin
F
ront
Speaker
In
put
-
Clutch
(Conn
ec
tto
fa
cto
rys
peaker
wire)
Front
Speak
er
Input
-
Brake
(
Co
nn
ec
tto
fact
o
ry
spea
ker
wir
e)
S
pe
a
ker
Output
Ha
rnes
s
(Rear)
NOTE:
Due
to
the
limited
space
available,
be
sure
to
connect
all
of
the
wiring
harnesses
to
the
amplifier
prior
to
mounting.
+
Battery
::<;
Q)
fS
(/)
(/)
Q)
E
"'
I
Whit
e
4-
Pin
(/)
(/)
Q)
c:
::<;
I
Whit
e,
8-p
in
Co
nn
ec
tor
Brake
Side
Input
Ha
rn
ess
- C
lu
tc
h
Inpu
t
Harne
ss-
Br
ake
(Co
n
nec
ttof
acto
ry
speake
rw
ir
e)
(Co
n
nec
ttofact
ory
speake
rw
ir
e)
Output
Harn
ess
- C
lut
ch
Out
p
ut
Harn
es
s-
Brake
REAR
All manuals and user guides at all-guides.com
all-guides.com

Contents
• 4-Channel Amplifier
• Amplifier Mounting Bracket
• 2-Way Speakers (2 Pair)
• Power Harness
• High-Level Input Harness
• Speaker Output Harness
Installation Tools
• Mounting Screws
• Zip Ties
• Velcro Pads
• Grille Badges
• Rubber Amplifier Pad
The following is a list of suggested tools needed for installation:
• Wrenches 1 Sockets- 7/16", • Small Flat Blade Screw Driver
3/8", 1/2", 10mm
• Wire Cutters
• Allen Wrench 1/8", 5/32"
• Scissors
• Torx- T10, T25
• #2 Phillips Screw Driver
Installation Considerations
This section focuses on some considerations for installing your motorcycle
audio kit. This manual will illustrate the installation of two different fairing
styles offered by Harley-Davidson® from the production years ranging
from 1998 to 2013. (Ultra Classic®, Electra Glide®, Street Glide®, Tri
Glide®, Road Glide® and Road Glide Ultra®.)
NOTE: This kit will not work on CVO™ models.
If you feel unsure about installing this system yourself, have it installed by
a qualified technician.
Lt. CAUTION Before installation, disconnect the battery neg-
ative (-) terminal to prevent damage to the unit,
fire and/or possible injury.
Lt. CAUTION Before beginning any installation, follow these
simple rules:
• Be sure to carefully read and understand the instructions before
attempting to install this motorcycle audio kit.
• Consult your motorcycle's service manual for model specific
information. Models may differ from year to year depending on factory
options and aftermarket accessories added.
• This motorcycle audio kit is a complete replacement to the factory
(OEM) 4-speaker setup.
• With the addition of an amplifier, be sure that your current charging
system is in proper working order.
• Utilize a blanket or fender cover to protect the front fender from tools
or any other item that may be accidentally be dropped while removing
the fairing.
• Visit rockfordfosgate.com for more comprehensive installation
videos and product information.
All manuals and user guides at all-guides.com

Q
v
Installation
Ultra
Classic®,
Electra
Glide®,
Street
Glide®
and
Tri
Glide®
models.
Step
1-
Fairing
Removal
To
begin
with
,
remove
the
top
bolts
below
the
windshield
and
remove
the
windshield.
Once
you
have
the
windshield
set
aside,
remove
the
remaining
screws
on
the
inside
of
the
fairing.
This
will
allow
you
to
remove
the
front
fairing.
You
will
need
to
disconnect
the
harness
from
the
headlight
to
completely
take
the
fairing
off
of
the
motorcycle
.
Step
2-
Speaker
Removal
After
the
fairing
is
removed,
unplug
the
wires
from
both
speaker
terminals.
Remove
the
screws
that
secure
the
factory
speaker
and
grille
to
the
fairing.
Remove
each
speaker
out
of
the
factory
grille.
NOTE:
Be
sure
to
keep
track
of
the
wires
that
are
plugged
into
the
clutch
and
brake
side
speakers.
Step
3-
Speaker
Installation
Take
the
factory
speaker
grille
assembly
and
carefully
attach
the
new
Rockford
speaker
to
the
factory
grille
.
All manuals and user guides at all-guides.com

NOTE: You can insert the one side of the speaker into the assembly
and use a flat bladed screwdriver or pry bar to gently pry the grille
onto the speaker for a tight fit. Be sure to orientate the speaker with
the terminals up.
Reattach the speaker and grille assembly to the fairing.
Step 4- Amplifier Pre-Wire
All of the wiring harnesses are color coded for ease of installation.
NOTE: Due to the limited space available, be sure to connect all of
the wiring harnesses to the amplifier prior to mounting. It is also
recommended setting the Level at this time. The recommended
setting is -3dB.
Refer to wiring diagram on Page 6 for harness and wire
connections
Step 5 -Amplifier Mounting
Without Communication Module
Installation
Using the supplied Velcro pad, cut it in half and apply to the top of
the radio and the bottom of the amplifier. Be sure to clean the top
of the radio for proper adhesion.
NOTE: When applying the Velcro to the top of the radio, it needs to
be applied close to the gauge cluster side so the installed amplifier
provides adequate clearance for the fairing when reinstalled.
With Communication Module
Models equipped with the communication module, installing the
supplied rubber foot to the bottom side of the amplifier is required.
All manuals and user guides at all-guides.com

10
Installation
Attach
the
Velcro
on
top
of
the
communication
module
and
to
the
underside
of
the
amplifier.
Once
the
amplifier
is
mounted,
you
can
now
wire
up
the
speakers.
Step
6-
Fairing
Speaker
Wiring
Take
the
factory
speaker
wires
and
plug
them
directly
in
to
the
new
High-Level
Input
Harness.
These
are
labeled
clutch
and
brake
side.
Now
you
can
plug
the
new
Speaker
Output
Harness
onto
the
Rockford
speaker
terminals.
NOTE:
The
terminals
utilize
the
1/8"
for
negative
(-)and
the
1/4"
for
positive(+)
sizing
for
easy
connections.
Step
7-
Remote
Wire
After
the
speakers
are
wired,
the
orange
wire
will
need
to
be
connected
to
the
cigarette
I
ighter.
This
is
the
remote
power
turn-on
for
the
amp
I
ifier.
Unplug
the
existing
cigarette
lighter
wire
and
plug
into
the
harness.
Then
plug
the
orange
wire
onto
the
cigarette
lighter
terminal.
NOTE:
When
routing
your
wires,
be
sure
to
avoid
sharp
edges
which
may
cause
damage
to
the
wiring
harnesses.
Any
extra
wiring
should
be
zip
tied
up
and
out
of
the
way
of
components.
Proceed
to
Step
8
on
page
14
for
continued
installation
instructions.
All manuals and user guides at all-guides.com