Rohl R51 User manual

INSTRUCTION MANUAL
MANUEL D’INSTRUCTIONS
MANUAL DE INSTRUCCIONES
R51 EXT51KIT
1. Turn off stops and remove the cartridge. To remove your trim set, refer to
original installation guide. 1. Turn off stops and remove the cartridge. To remove
your trim set, refer to original installation guide. 1. Turn off stops and remove
the cartridge. To remove your trim set, refer to original installation guide.

INS12920 - Rev. 06/22
For warranty or additional
information, contact: US Customers
houseofrohl.com/support
1-800-777-9762
Canadian Customers
houseofrohl.ca/support
1-866-473-8442
1-800-287-5354
2. Install centering pins and new bottom cavity gasket into the extension. 3. Install the new
puck extension and the balancing spool and cartridge into place. 4. Install cartridge nut housing
by hand tightening and apply a 1/4 turn with a wrench. Do not overtighten.
2. Install centering pins and new bottom cavity gasket into the extension. 3. Install the new
puck extension and the balancing spool and cartridge into place. 4. Install cartridge nut housing
by hand tightening and apply a 1/4 turn with a wrench. Do not overtighten.
2. Install centering pins and new bottom cavity gasket into the extension. 3. Install the new
puck extension and the balancing spool and cartridge into place. 4. Install cartridge nut housing
by hand tightening and apply a 1/4 turn with a wrench. Do not overtighten.