Rohl Perrin & Rowe U.3626X User manual

U.3635L-2
FEATURES FINISHES WARRANTY
www.rohlhome.com
• Fixed spout
• Spout, valve housing, and pop-up
made from solid brass
• 1 x 1 3/8" hole cutout
• 1/ -turn ceramic disc valves
• Pop-up drain, 1 1/ " pipe
• Unique handle fixing clip,
engineered to increase the life of
the valve
• 1/2" NPSM flexible stainless steel
hose connections
• Includes both porcelain and metal
lever inserts
• 1.2 GPM
•Polished Chrome
•Polished Nickel
•Satin Nickel
•Inca Brass
•English Bronze
• Limited Lifetime
ROHL Perrin & Rowe®Bath
PERRIN & ROWE® EDWARDIAN SINGLE HOLE,
DUAL HANDLE LAVATORY FAUCET
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
11" Centers Max
10
3/4"
3
1/8
"
1 3/4
"
Max
5
"
6"
2
1/4"
1
/
2"
NPSM
Flexible Connections
11 3/4"
Ø2 1/8”
Ø1 1/4”
Ø1 3/8”

www.rohlhome.com
U.3635L Spare Parts
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
9.15402
9.26709

www.rohlhome.com
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
PREPARATION
Flush the plumbing system before installing the mixer faucet.
This is to avoid plumbing residues clogging the mesh of the
aerated outlet, or possibly damaging the ceramic valves. This is
especially important where extensive plumbing work has been
carried out.
The Hot supply should be on the left when viewed from the
front of the fitting.
CHECK LIST
!!Temperature of the hot water supply does not exceed 185 F !!
!
!R
Re ec co om mm me en nd de ed dminimum water supply pressure - 15 psi ! !
!
!R
Re ec co om mm me en nd de ed dmaximum water supply pressure - 75 psi ! !
!!IIddeeaallppeerrffoorrmmaanncceeoobbttaaiinneeddwwiitthheeqquuaallhhoott&&ccoollddpprreessssuurreess!!
A S S E M B LY - Refer to Fig 1.
Assemble the faucet by feeding the flexes through the hole in
the worksurface, ensuring the base ring and seal are in place.
Place clamp plate and securing nut onto the clamp bolt, tighten
with spanner provided to underside of worksurface.
Connect Hot & Cold water supplies to flexible connections,
ensuring they are tightened firmly.
Remove pop-up from waste. Unscrew and remove top waste,
complete with foam seal, through waste hole in basin/bidet.
Offer bottom waste, complete with rubber seal, to underside of
basin/bidet and screw top waste into bottom waste. Ensure
that pop up shaft is in position alongside pop up rod. (Shaft
can be cut shorter if space is restricted). Slide fixed end of
clamp bracket onto pop up shaft. Lift pop up rod and then
lower into swivel end of clamp bracket. Adjust position of
clamp bracket to achieve maximum movement of pop up shaft.
Place pop up into waste and adjust movement using the screw
in the bottom of the pop up.
1
/
2 "
NPSM
Base Ring
HOT IN COLD IN
Base Seal
Cover & Handle
Clamp Plate
Flexible Hoses
Securing Nut
Clamp Bolt
1
3/8"
ø
Hole
1
3/4"
MAX
1
1/4"
ø
Fig 1.
Installation of Faucet
Before you proceed... We recommend you engage the
services of a registered plumber to install this product.
Read the instructions on this leaflet carefully.
Congratulations on the purchase of your Perrin & Rowe Bathroom Faucet.
Correctly installed and with sensible care, it will give many years of trouble free service.
U.3626X U.3635L U.3676X U.3685L
Lav/Bidet Centersets
BEFORE USE
Carefully check the installation for leaks.
If further building work is to be carried out in the vicinity, cover
the faucet with a plastic bag to avoid damaging the finish.
Please ensure that the installation complies with the local
plumbing codes.
The Traditional Bathroom Collection
Installation & User Guide

www.rohlhome.com
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
OPERATION
Ceramic disc valves are tted as stand ard to this mixer faucet. Flow from
FULLY OFF to FULLY ON is achieved by rotating the handles a quarter turn.
When using pop up waste, push down on plug to seal the waste prior to
lling the bowl. Push down on pop up knob to discharge waste water.
CARE & MAINTENANCE
Occasional cleaning with warm soapy water, followed by a polish with a
soft cloth is all that is required to keep the plated nish in good
condition.
Do not use proprietary abrasive liquids, powders, or pads to clean the
faucet. You will damage the plated nish and void your warranty.
An aerator is tted to the outlet of the spout, this may need occasional
cleaning. This will be evident when the water ow slows down to an
unacceptable level. To accomplish this unscrew the outlet in a counter-
clockwise direction and remove the aerator, rinse thoroughly in clean
water and re-install.
9.24193*
9.26410
Porcelain
9.12600*
9.131 95/Hot 9.09422*
9.131 96/Cold
9.12451*
9.131 96
9.18380*
9.264009.28624
9.01451/Hot*
9.01451/Cold* 9.01625*
9.19653*
9.25552
9.26411*
Solid
9.19653*
9.26705
9.25552
SPARE PARTS AND SERVICE
Perrin & Rowe is a trademark of Avilion Ltd. 903626U/1 01/08
Fig 2.
Spare Parts - *Where indicated specify color
3 Parker
Irvine
CA 92618
[phone]
HANDLE VARIANTS
Both porcelain and solid levers are included with U.3635L and U.3685L models.
HOW TO CHANGE
DE
F
A
C
B
A
BE
1) Unscrew lever bolt Afrom lever ball Bby
hand.
2)Remove metal lever insert Cand seal D.
3)Place one of the replacement seals Eonto
lever bolt Aand slide to the end. Place
porcelain lever insert Fonto lever bolt A
and slide to the end of the bolt.
4)place the other replacement seal Eonto
lever bolt Aand slide to the end of the
porcelain lever insert.
5)Screw lever bolt and porcelain lever insert
assembly back into lever ball Band screw
down tightly by hand