Rohl Georgian Era U.4744 Operation manual

U.4744 Country Kitchen Pull Down
The Country Kitchen Collection
Installation & User Guide
ROHL WARRANTY POLICY
All products supplied by ROHL carry warranties against manufacturing defects.
Perrin & Rowe products carry aLimited Lifetime Warranty.
ROHL LLC will provide free of charge, as its options, replacement part(s) or product (or a comparable alternative
product) to replace those which have proven defective in materials or workmanship.
For full ROHL LLC WARRANTY please contact ROHL or visit www.rohlhome.com
Perrin & Rowe products are manufactured in the UK, using the latest
technology and built to the highest quality standards.
We would like to thank you for purchasing aPerrin & Rowe product and
take this opportunity to invite you to look at other luxury products by us.
Please contact us to recieve our latest catalogue.
Perrin &Rowe is a registered trademark. 9004744U Issue 1
Temp Range:
Min 1°C/34°F
Max 85°C/185°F
Recommended
Working Pressure:
Min 1bar/15psi
Max 5bar/75psi
Ideal performance obtained with equal hot & cold pressures.
* Where indicated please specify color
SPARES
SPARE PARTS& SERVICE
3 Parker
Irvine
CA 92618
[phone]
www.rohlhome.com
9.26400
9 1/2"
1 3/8" Hole
9.25744
Aerator Kit
9.13841
9.12745*
9.201210*
9.18380*
9.28302
9.280737
9.17744*
1 3/4"
Max
Hot In
1/2"
Cold In
1/2"
9.26745
9.15744
16 1/8"
9.01340*
9.28746
9.19840
9.24745*
9.26760*
9.25066
9.03744
9.19403
8 3/4"

Congratulations on the purchase of your Perrin & Rowe kitchen product. Correctly installed and with sensible care,
this product will give you many years of trouble free service.
IMPORTANT INFORMATION
Before you proceed... We recommend you engage the services of a registered plumber to
install this product.
For ease of possible future servicing, we also recommend the fitting of conveniently placed
isolating valves.
In addition to the guide below it is essential that the written informationoverleaf is carefully
read and understood.
Preparation Check Box for Installer
Flush the plumbing systembefore
installing the kitchen product.
Once unpacked remove clamp plate and hose weight
ready for installation.
1Installation
CARE & MAINTENANCE
Wipe down afteruse to avoid waterspotting and mineral build up.
Occasional cleaning with warm soapy water, followed by apolish with asoft cloth is all that is required to keep the
plated finish in good condition.
Donot use proprietary abrasive liquids, powders, or pads toclean the faucet. Donot use any products
with ammonia bleach or limescale remover. You will damage the plated finish and void your guarantee.
BEFORE USE
• Carefully check the installation for leaks.
• If further building work is to be carried out in the vicinity, coverthe product to avoid damaging the finish.
• Please ensure that the installation complies with local plumbing codes.
Base
Seal Base Ring
Securing Clamp
Nuts
Insert hose in to
weight and secure
together with the
screw and washer
provided, using the
hex key provided.
Ensure that the
weight is fixed in
place.
Important note:
Do not overtighten
the screw.
2Attach weight to hose
The weight can be
moved to vary the
amount of extension
required.
4Test pull down
Box Spanner
(Included)
Before installing the product, leave a gap of 1 1/2"
minimum from the centerof the work surface hole to
any walls orshelves (see image in section 5).
Insert the flexible connections through the work
surface hole Ø1.3/8" ensuring that the base ring and
rubber seal are in place between mixer and mounting
surface. Ensure the mixer is orientated correctly.
Secure mixerusing the clamping plate and nut. (A
box spanner is provided). It is recommended to
install a stop value to the mains supply.
Please note: The rubberbase seal is an essential
item and must be fitted.
Ensure there is ample room in the space under the work
surface forthe hoses and weight to move freely. Test that the
spray head extends far enough by pulling it out.
The spray head should retract smoothly and fix back in place
comfortably.
Connect Hot & Cold watersupplies. For ease of servicing it is
recommended that stop valves be fitted to watersupplies. Take
care in ensuring the flexible hoses are installed without kinks or
twists.
Important note: Ensure that the hose forthe spray is
securely in place and fed through the plastic hose guide. This
should prevent the spray hose from becoming twisted with the
hot and cold inlet hoses.
Ensure all connections are firmly tightened.
More
Extension
Less
Extension
19 1/2"Max
To turn the faucet on push the lever
inwards toward the body.
5Operation
Hot water
Cold water
3Weight adjustment
OuterSpray
To change the flow of waterfrom the inner jet to the
outerspray, with the water running slide the button
downwards. The spray will return to the inner jet after
turning the faucet off.
Inner Jet
1 1/2" Min.

Congratulations on the purchase of your Perrin & Rowe kitchen product. Correctly installed and with sensible care,
this product will give you many years of trouble free service.
The Country Kitchen Collection
Installation & User Guide
IMPORTANT INFORMATION
Before you proceed... We recommend you engage the services of aregistered plumber to
install this product.
For ease of possible future servicing, we alsorecommend the fitting of conveniently placed
isolating valves.
In addition tothe guide below it is essential that the written informationoverleaf is carefully
read and understood.
Preparation Check Box for Installer
Flush the plumbing systembefore
installing the kitchen product.
Once unpacked remove clamp plate and hose weight
ready for installation.
1Installation
CARE & MAINTENANCE
Wipe down afteruse to avoid waterspotting and mineral build up.
Occasional cleaning with warm soapy water, followed by apolish with asoft cloth is all that is required to keep the
plated finish in good condition.
Do not use proprietary abrasive liquids, powders, or pads to clean the faucet. Do not use any products
with ammonia bleach or limescale remover. You will damage the plated finish and void your guarantee.
BEFORE USE
• Carefully check the installation for leaks.
• If further building work is to be carried out in the vicinity, coverthe product to avoid damaging the finish.
• Please ensure that the installation complies with local plumbing codes.
Base
Seal Base Ring
Securing Clamp
Nuts
Insert hose in to
weight and secure
together with the
screw and washer
provided, using the
hex key provided.
Ensure that the
weight is fixed in
place.
Important note:
Do not overtighten
the screw.
2Attach weight tohose
The weight can be
moved to vary the
amount of extension
required.
4Test pull down
Box Spanner
(Included)
Before installing the product, leave a gap of 1 1/2"
minimum from the centerof the work surface hole to
any walls orshelves (see image in section 5).
Insert the flexible connections through the work
surface hole Ø1.3/8" ensuring that the base ring and
rubber seal are in place between mixer and mounting
surface. Ensure the mixer is orientated correctly.
Secure mixerusing the clamping plate and nut. (A
box spanner is provided). It is recommended to
install a stop value to the mains supply.
Please note: The rubberbase seal is an essential
item and must be fitted.
Ensure there is ample room in the space under the work
surface forthe hoses and weight to move freely. Test that the
spray head extends far enough by pulling it out.
The spray head should retract smoothly and fix back in place
comfortably.
Connect Hot & Cold watersupplies. For ease of servicing it is
recommended that stop valves be fitted to watersupplies. Take
care in ensuring the flexible hoses are installed without kinks or
twists.
Important note: Ensure that the hose forthe spray is
securely in place and fed through the plastic hose guide. This
should prevent the spray hose from becoming twisted with the
hot and cold inlet hoses.
Ensure all connections are firmly tightened.
More
Extension
Less
Extension
19 1/2"Max
To turn the faucet on push the lever
inwards toward the body.
5Operation
Hot water
Cold water
3Weight adjustment
OuterSpray
To change the flow of waterfrom the inner jet to the
outerspray, with the water running slide the button
downwards. The spray will return to the inner jet after
turning the faucet off.
Inner Jet
1 1/2" Min.