Roland SYSTEM-500 530 User manual

1
SYSTEM-500 530 Q&A
2016/01/14
Q :
What can be accomplished using the SUM output from the SYSTEM-500 530?
A :
You can mix and output a total of 6 channels of input.
You can also use the system as a 6-channel mixer.
Q :
What kind of power unit is required when mounting a SYSTEM-500 series unit in a
Eurorack case?
A :
The separately available SYR-E84 can be used.
If you're using a power unit of other make, use one capable of supplying the required
current to each respective module.
Ensure that the total current consumption of the respective modules does not exceed
the capacity of the power supply.
The required current values of the respective modules are as follows.
SYSTEM-500 512 : +12V 70mA / -12V 55mA
SYSTEM-500 521 : +12V 40mA / -12V 40mA
SYSTEM-500 530 : +12V 50mA / -12V 35mA
SYSTEM-500 540 : +12V 85mA / -12V 50mA
SYSTEM-500 572 : +12V 110mA / -12V 90mA
Q :
Can miniature stereo phone plug cables be used with a SYSTEM-500 series unit?
A :
Use miniature monaural phone plug cables.
Q :
Can power cables of other makes be used with a SYSTEM-500 series unit?
A :
Use the cables included with the SYSTEM-500 series unit.

2
Q :
How do I mount a SYSTEM-500 series unit in a case?
A :
Check the included owner's manual.
When mounting, use proper screws for the case.
Q :
How do I connect the power cable to a SYSTEM-500 series unit?
A :
Check the included owner's manual.
Q :
What is the inputtable CV range for the SYSTEM-500 series?
A :
This is -/+10 V.
* Inputting -/+12 V results in signal distortion.
Copyright (C) 2016 Roland Corporation