Roland GC-1 GK Ready Strat Setup guide

Contents
1. FEATURES
2. QUICK DEMO
3. FIVE FEATURES TO KNOW and SHOW
4. ACCESSORIES
5. GUITAR SPECS
ROLAND GC-1 GK READY STRAT
TRAINING GUIDE

1. FEATURES_____________________________________________________
The Roland GC-1 GK Ready Strat offers legendary Fender tone and classic
styling, with a built-in Roland GK pickup system to drive 13-pin compatible
products directly from the guitar’s onboard controls.
Built in Roland GK pickup system and controls.
Fender authorized and made Stratocaster
The physical design of the guitar is similar in spec to an American
Standard Stratocaster, but is assembled in Mexico. The “Synchronized
Tremolo” bridge and pickups are the only parts that differ from the
American Standard series.
3 ceramic single coil pickups, for classic Fender tone.
22 fret neck, modern “C” shaped neck curve, 25 ½” scale length and
American 6- inline Tuners.
All guitar parts made in America, assembled in Mexico.
Synchronized tremolo with high-mass bridge block (based on the
original Stratocaster trem but with more mass for better string
vibration.)
Shielded body
Medium jumbo frets, considered by many the most comfortable to play.
“Cool factor” vintage style cosmetics: tinted neck, parchment pick
guard and ’70s-style headstock logo.
Includes Fender Premium Gig Bag w/Roland V-Guitar logo
2 models available: Hand-painted, 3-tone sunburst/rosewood
fingerboard (GC-1-3TS) and black/maple fingerboard (GC-1-BLK)
The original and iconic Stratocaster sound everyone knows and loves!

2. QUICK DEMO___________________________________________________
The Quick Demo is a way to get the customer interested in a product in less than
60 seconds.
Before you Start
To demonstrate the Roland GC-1 GK Ready Strat you need to connect to a GR-
55, VG-99, or other 13-pin compatible device.
1. Check the condition of the strings and the tuning of the guitar. Strings
should look clean and not corroded.
2. Tune to A440 standard tuning EADGBE. If new strings have been put on
the guitar make sure they are thoroughly stretched before demo so as to
not go out of tune during the demonstration. Ideally the guitar should be
checked to insure it is set up properly.
3. Use a high quality guitar amp, such as a Roland Cube-80XL or other pro
quality guitar amp.
4. Plug the mono output of the 13-pin compatible device into
the clean channel of the amp.
5. Plug in a 13-pin cable into the 13-pin input on the guitar and
the other end of the cable into the 13-pin input of the 13-pin
compatible device.
6. Set the GUITAR/SYNTH MIX toggle switch to [ SYNTH ], and turn the GK
volume knob up to 10.
*IMPORTANT: be sure to set the GK Pickup Sensitivity of the 13-pin device
correctly. Check its manual for specific instructions.
THE QUICK DEMO
1. Turn on the 13-pin compatible device and select a simple factory preset
patch like a piano, flute, or violin, (or just use the first patch to pop up).
2. Play a few single notes to demonstrate how the Roland GC-1 GK Ready
Strat can control the device.
3. Use the [ UP ] and [ DOWN ] push buttons to change patches
4. Turn the guitar [ VOLUME ] and [ TONE ] knobs up to 10, switch the
GUITAR/SYNTH MIX toggle to the middle [ MIX ]. Strum a simple chord
and adjust guitar [ VOLUME ] and the GK-2 [ VOLUME ] to demonstrate
the mixing and blending of the volumes for the guitar sound and the synth
sound.

3. FIVE FEATURES to KNOW and SHOW______________________________
1. An authentic Fender Stratocaster that can drive all 13-pin devices via a
built in GK pickup and controls.
2. The physical design of the guitar is similar in spec to an American
Standard Stratocaster, but is assembled in Mexico. The pickups and
the bridge are the only parts that differ from the American Standard
series.
3. Super simple and well laid out GK design:easy to navigate the
different controls at your fingertips.
4. GK system allows you to play/hear the guitar sound, the synth sound
or both at the same time.
5. 2 models available: 3-tone sunburst/rosewood fingerboard (G-5-3TS)
and black/maple fingerboard (G-5-BLK)
4. ACCESSORIES_________________________________________________
Roland GR-55, VG-99
Boss Tuners: TU-10, TU-3, TU-1000, TU12EX, TU-88, TU-80, TU-15, TU-12
GKC-5, GKC-10 13-pin cables
GK-2 VOLUME KNOB
GUITAR/SYNTH MIX
TOGGLE
5 WAY PICKUP SELECTOR
SWITCH
GUITAR TONE KNOB
UP/DOWN PUSH BUTTONS
GUITAR VOLUME KNOB

5. GUITAR SPECS_________________________________________________
Body Alder
Color Black (GC-1-BLK) or 3-tone Sunburst (GC-1-3TS)
Neck Maple
Fingerboard Maple (GC-1-BLK) or Rosewood (GC-1-3TS)
Radius 9.5"
Neck shape Modern C
Scale Length 25.5"
# of Frets 22
Fret Size Medium Jumbo
Logo "Fender Powered By Roland"
Nut width: 1.650” (42 mm)
Truss Rod Nut: 3/16" Hex Adjustment