Rollei dt3200 User manual

i
Preface
Thank you for purchasing this camera. This camera will help you fulfill all
your digital pictures processing needs.
The camera is equipped with five modes (Capture Mode, Playback
Mode, DSC Setup Mode, Video Mode, and Macro Mode) for your explo-
ration.
This light and handy digital camera offers 3.23 mega pixels high-quality
image along with precise 12 x zoom (3 x optical plus 4 x digital) The built-
in 16MB memory can store your images. The stylish metallic case is
crafted from aluminum alloy, making this camera light and portable.
Through a USB cable connection, pictures can be easily transmitted from
the camera to the PC. Nine recorded images can be displayed on the
high resoultion LCD. Continuous shooting function is also available for
users to take multiple frames of scenes in quick succession.
Note: 1. The company keeps the right to change the con-
tents of this document, spec of this camera in the
future, without prior notice.

Table of Contents ii
E N
Table of Contents
Preface.........................................................................i
Prior to Operating the Camera ..................................1
Unpacking the camera. ........................................................... 1
Identifying components ........................................................... 2
Loading the battery and SD Card............................................ 3
Basic Settings.......................................................................... 4
Formatting the SD Card .......................................................... 4
Basic Operating Procedure .......................................5
Turning the Camera ON/OFF.................................................. 5
Basic Shooting ........................................................................ 5
Auto-Focus Function ............................................................... 6
Zooming In/Out........................................................................ 6
Flash Setting. .......................................................................... 6
Playback.................................................................................. 6
Five Main Camera Mode and Instructions................7
Video Mode ............................................................................. 9
Capture Mode.........................................................................10
Playback Mode.......................................................................14
Macro Mode ...........................................................................16
DSC Setup Mode....................................................................17
Making Connections..................................................20
Installing software...................................................................20
Connecting through the mini USB. .........................................20
Connecting through TV-out via docking station (optional)......22
Recharging through the docking station (optional).................22
APPENDIX ..................................................................23
Specifications .........................................................................23

1
Prior to Operating the Camera
Set this digital camera by following these quick and simple instructions.
Unpacking the camera
1. Clear all items from the box. (It is highly recommended that the box and wrap-
pings are kept for future usage)
2. Double check for the following items:
Optional Items:
Pouch
Camera
Handstrap CD-ROM
Mini USB Cable Battery
Battery Charger
AC Adapter Docking Station
Video Cable

E N
2
Identifying components
CAUTION! 1. Use the rechargeable Li-ion for docking only. Do not
use non-rechargeable batteries while docking.
2. Use only the specified battery or AC power adapter
specified (5V 2A) for use with this camera. Other
power sources may cause fire.
Power/Flash LED Zoom Button
TFT LCD
DC-in & USB Connector
Flash Viewfinder
.
Self timer LED
Auto-Focus LED
Zoom Lens
Handstrap Hook
Display Button
Five-way Switch
Viewfinder
Menu Selection
Shutter
Mode Dial
Speaker
Power Button
Battery & SD Card
Compartment
AC Adapter LED
Battery Charging Status LED
Red (Charging), Green (Done)
DC-In
TV-Out
USB
Docking Connector
Microphone

5
Basic Operating Procedure
This section provides simple and basic directions to get you started with
your camera. From this section, you will learn how to turn the camera on
and off, shoot pictures, zoom In and Out, set your flash, and playback
your pictures.
Turning the Camera ON/OFF
1. Locate the power button on top of the camera.
2. Press the power button down to turn the camera ON or OFF,
The backside LED indicator will remain green while the power is turned
ON
Basic Shooting
1. Turn the mode dial to the capture mode
2. Look into the viewfinder/LCD and try to align
your subject in the crop mark.
3. When you are set, press the shutter button
once.
Power ON/OFF Button

7
Five Main Camera Mode and
Instructions
This section describes the five modes included in this camera. An in-
depth coverage of these modes will be further described. Here are the
five main functions of this camera:
Camera Mode Function Setting Page
Video Mode 1. Record Movies Page 9
Capture Mode 1. Resolution
2. Image Quality
3. Color Effect
4. White Balance
5. Scene
6. Metering
7. Sharpness
8. EV Adjust
9. ISO
Page 10
Playback Mode 1. Erase Picture
2. Protect Picture
3. DPOF
4. Slide Show
5. Voice Memo
Page 14

E N
8
Macro Mode 1. Resolution
2. Image Quality
3. Color Effect
4. White Balance
5. Scene
6. Metering
7. Sharpness
8. EV Adjust
9. ISO
Page 17
DSC Setup Mode 1. Date and Time
2. Auto Power Off
3. DPOF
4. Slide Show
5. Sound Effect
6. Languages
7. TV-out
8. Restoring
Page 17
NOTE: 1. Press the display button once to delete the icons
from the LCD display. To turn the LCD display sim-
ply press the display button a second time. To save
your battery power, it is best to not leave your dis-
play ON for a long period of time.

E N
10
Capture Mode
Capture mode will allow you to shoot single, continuous images, set your
flash and self-timer. Depending on the environment and setting, the cam-
era’s settings will work accordingly. To exit the setting menu, simply press
the menu button.
• Shooting images
1. Under Capture Mode, press the shutter button. The camera will start checking
whether the memory is sufficient to store the image. If it is full, a warning “Mem-
ory Full” icon will display on the LCD.
2. Once the picture is taken, you can erase the image under instant review. user
can protect image when in playback mode
3. If you decide to erase this image, press down. An erase icon will appear on the
LCD, press OK to achieve this function.
Resolution
Image Quality
EV Icon
Continuous
Shot
Self Timer
Date
Battery Status
Remaining Number
of Pictures
Zoom Bar
Flash
White Balance
* The icons can be removed from the display by pressing
the display button once.
Metering
ISO (100/200)
Capture Mode

11
• FLASH Setting
1.To set the Flash, press the Five-Way Switch to the Left to select the
desired Flash setting. You will have the four types of Flash settings: Flash
Off, Auto Red-eye reduction, Flash Force On, and Night. Once you’ve set
your Flash setting, proceed with your picture taking.
•SelfTimer
To set the self timer under the capture mode, please press Five-Way
Switch to the Right button once to activate the self timer. You will have
ten seconds to get ready for your pose. The countdown number will be
displayed on the LCD as well followed by a beep sound.
• Shooting Continuously Setting
Pictures can be shoot in successive orders.
1. Keep pressing the right button twice until Shooting Continuously icon appears
on the LCD Display.
2. Keep pressing the shutter button to activate Shooting Continuously. Then
release the shutter after the three sequences have been taken.
Flash Off The Flash will not fire.
Auto Red-eye
reduction
The Flash will fire depending
on the light source. Red eye
deduction will also be active
when needed. (Flash will
blink twice, picture will be
shot when the second flash is
fired.)
Flash Force On The Flash always fire with
every shot.
Night (Slow) The camera extends the
mechanical shutter action,
and allow flash delay.

13
White Balance Users can select the fol-
lowing white balance:
Auto
Shade
Sun
Tungsten
Fluorescent
It adjusts the rela-
tive brightness under
different condition.
The default is Auto.
Sharpness Users can select the fol-
lowing sharpness:
Normal
High
Low
Enhance of edge
detail. The default is
Normal.
EV Adjust Users can select the fol-
lowing EV adjust:
from EV+2.0~ toEV -2.0, in
EV 0.5 step increase
This function allows
users to control the
exposure value, to
either lighten or
darken images the
camera is trying to
focus. The default is
0.
Scene Users can select the fol-
lowing scene:
Night
Portrait
Landscape
Night Portrait
Off
This pre-defined set-
tings make it even
more convient for
users to take pic-
tures. Users will not
need to make any
further adjustment to
the camera. The
scenes are already
pre-defined.
ISO Users can select the fol-
lowing ISO setting:
100
200
Auto
It adjusts the sensi-
tivity of the camera.
The higher the num-
ber, the more sensi-
tive it is to light. The
default is Auto.

15
• Displaying Thumbnails
1. Turn the Mode Dial to Playback Mode.
2. Press the display button two times to thumbnails in sets of nine.
3. Use the Five-Way Switch to change the image selection.
4. Press OK button to magnify images to standard size.
5. Press the left or right button to view other images.
• Display with Digital Zoom
The camera has 4x digital zoom.The picture can be zoomed up to four
times the original size. The five-way switch controls left, right, up, and
down of the image. Press the OK button to quit Digital Zoom Display.
1. Turn the MODE DIAL to Playback Mode.
2. To enter/exit Playback Mode Setup, press the Menu button.
3. While you are in the Playback Mode menu setting, use the Five-Way Switch to
select.
Function Setting Selection Definition
Protect Picture Users can select the fol-
lowing:
Protect all
Uprotect current
Unprotect all
Protect current
Protection setting for
your pictures against
accidental erasure. Once
you are set, press OK to
confirm.
Slide Show Users can select from:
From current (picture)
From first (picture)
From last (picture)
Pictures will be displayed
in an orderly way. While
you are in the Slide Show
setting, press OK to start/
exit slide show.
Erase Pictures Users can select from:
Current
All
Format
Erasing options for your
pictures. When format-
ting, a warning message
will appear. Press the OK
button to confirm. Format
will permanently remove
all data such as internal
memory/ SD card.

E N
16
Macro Mode
Macro mode is best used for taking close-up images with franges from
15-50 cm.
Please refer back to Capture Mode section (page 11) for shooting images,
and continuous shooting.
Digital Print Order
Format or DPOF
Users can select from:
Frame Set
Reset all
It is a standard for print-
ing the pictures directly
from the SD card. Pic-
tures can be printed on
printers compatible with
the DPOF standard.
frame set --> set for one
image
reset all --> set for all
Voice Memo You are allowed 20 sec-
onds to record voice
memo. Users can select
from:
Record
Erase
Play
1. Select the picture you
wish you add voice
memo.
2. Press menu button.
3. Choose Voice Memo.
4. Select record
4. Press the shutter to
start or end recording.
Resolution
Picture Quality
EV Icon
Continuous
Shot
Date
Battery Status
Remaining Number
of Pictures
Flash
White Balance
* The icons can be removed from the display by pressing
the display button once.
Metering
ISO (100/200)
Scene
Macro Mode

17
DSC SETUP MODE
Under this mode, you will be able to set your desired settings. There are
a total of eight different settings.
1. Turn the mode dial to enter the DSC Setup Mode.
2. Select the type of setup you want to perform by pushing the left or right button.
Press the UP or Down arrow to select the function setting.
Function Setting Selection Definition
Date and Time Users can select to set:
Time
Date
Reset date and time
when change battery.
Auto Power Off Users can select the fol-
lowing minutes to Auto
Power Off the camera.
This setting automatically
turns off the camera.
(Prior to shutting off, the
LCD will shut itself auto-
matically)
DPOF Users can select the
number of copies of
images they want to
print, and whether turn
the date and the no. of
files on or off in the pic-
ture.
It is a standard for print-
ing the pictures directly
from the SD card. Pic-
tures can be printed on
printers compatible with
the SD card. Users can
set certain pictures to
DPOF.
Sound Effect
TV-out
Slide Show Order
Date and Time Restoring
Auto Power Off
Languages
DPOF

E N
18
Slide Show Users can select the:
Interval
Repeat
Direction
Under this setting, users
can set the number of
seconds they want the
slide show to proceed
per slide, repeat the
show or not, and the
direction where these
slides should proceed.
Sound Effect Users can select either
on or off
This function allows
users to turn the sound
ON or OFF.
Languages Users can select from
the following languages:
Deutsch
English
French
Italian
Japanese
Korean
Spanish
Simplified Chinese
Traditional Chinese
There are a total of nine
languages you can
choose to navigate this
camera. Camera will
keep your language set-
ting but users will need to
reset when change bat-
tery. Press the Up or
Down button to select.
Press OK to confirm.
TV-Out Users can select from:
NTSC
PAL
Depending on where
your location, different
region requires different
system for TV-out func-
tion. Please use the
docking station to set the
TV-Out. Press the Up or
Down button to select.
Press OK to confirm.