Rollei Desview T2 User manual

PRODUCT
INSTRUCTION
Smartphone/Tablet/DSLR Teleprompter
Global patent design Support wide angle lens

Packing list
Structure
Application
APP installation
Remote controller introduction
After-Service
Warranty card
Contents

Packing list
Packing list
Teleprompter Smartphone clamp
Remote controller Microfiber cloth User manual
Smartphone/Tablet clamp
Hexagon wrench
/Screw
Foam ring
Lens adapter
（49/52/55/58/62/67/72/77mm)

Structure
Structure
213.9mm 139.6mm
170.9mm

Structure
Structure
151.6mm
79mm
77mm
142mm
85mm
95mm

Application
Using the smartphone for live stream Share below two
methods for your reference

Application
Installation steps
Take out clamp's components
Inner foam ring,outer foam ring,49mm lens adapter,paste the
outer foam ring on the 49mm lens adapter, and then select
the inner foam ring that matches the phone lens and embed it in
the center of the outer foam ring
Install the assembled 49mm
lens adapter onto the
teleprompter
Install the clamp on the
teleprompter
Tighten with the screw cap Install the teleprompter on
the tripod by 1/4” screw hole
on the bottom
Install the phones in front of
and rear of the teleprompter
49mm lens adapter
Inner foam ring
Outer foam ring

Application
Using DSLR for live stream
Methods 1: Tablet + DSLR Methods 2: Smartphone + DSLR

Take out the lens adapter
Install the whole teleprompter
on the tripod
Adjust the focus of lens to
full screen
Install the lens adapter on
your camera
Install the teleprompter on
the camera
Put the teleprmpter’s smartphone
on the teleprompter
Application
Installation steps

APP installation
APP installation
IOS app download
Audroid app download
IOS user search“BESTVIEW.”
Use your scan tool scan the QC Code to download

Remote controller introduction
Play/Pause
Pull down can switch play&Pause
Remote controller
Menu（Connect IOS no function）
Speed up
Slow down
Page down
Page up
Return（Connect IOS is HOME
function）

Remote controller

After-Service
1.Free service for one year from the day of purchase if the issue is caused by manufacturing errors.
2. The components and maintenance service fee will be charged if the period is expired.
1.Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
2.Damage caused by a natural disaster, abnormal voltage, and environmental factors, etc.
Conditions of Warranty Service
Free service will not be provided in the following situations
(* Even if the product is still within the warranty period)