Glide Gear REVO 150 User manual

REVO 150
USER MANUAL

What’s included?
For more informaon please visit our website: www.glidegear.net
Backdrop (I)
Telescopic Arm (J)
Spinning Element (D)
Telescopic Pole x2 (E)
Support Arm (K)
Ball head (L)
End Guide x4 (C)
Counterweight plaorm (G)
Base (A)
Top Plate (I)
Upside Down Adapter (M)
Hardware— Top Plate (H)
Arm Clamp x2 (F) Hardware—End Guide (B)

Assembly
Insert the End Guides (C) into the 4 ends of the base (A) as shown in Fig. 1.
1
For more informaon please visit our website: www.glidegear.net
Fig. 1
Place the Spinning Element (D) on top of the base with the End
Guides facing the Spinning Element as shown in Fig. 2.
2
Use the 8 screws in Hardware—End Guide (B) to x the
Spinning Element (D) and the End Guides (C) to the Base (A)
3
Your assembly should now look like in Fig. 3.
Fig. 2
Fig. 3

Assembly
4
For more informaon please visit our website: www.glidegear.net
Slide the Telescopic Poles (E) into the 2
openings in the middle of the Spinning
Element (D). See Fig. 4.
Fig. 4
Fig. 5
Fig. 6
5Slide Arm Clamps (F) onto the smaller poles of the
Telescopic Poles (E) as shown un Fig. 5.
Slide the Counterweight Plaorm (G) on the other
end of the assembly as shown in Fig. 6.
6

Assembly
7
For more informaon please visit our website: www.glidegear.net
Use the screws in the Hardware– Top
Plate (H) to aach the Top Plate (I) to the
top of the Spinning Element (D) as
shown in Fig. 7. Fig. 7
Fig. 8
8Aach the end of the Telescopic Arm (J) to one the
Arm Clamp (F).
9Aach one end of the Support Arm (K) to the other
Arm Clamp (F) and the other end of the Support Arm
(K) to the clamp along Telescopic Arm (J) .
Your assembly should now look like in Fig. 8.

Assembly
10
For more informaon please visit our website: www.glidegear.net
Fig. 9
Use the long thumb screw and big washer included with the hardware to lock in
place the counterweight.
Please note that the REVO 150 does not include any counterweights.
11 Aach the Ball Head (K) at the end of the Telescopic Arm (J).
The nal assembly should look like in Fig. 9.

Upside Down Setup
For more informaon please visit our website: www.glidegear.net
Combined with the Glide Gear OH 150 and 2 C-stands, the REVO 150 can be set upside down to shoot bigger
subjects. An example for such a set up is shown in the below picture.