PROAIM Gladiator Action Dolly User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Gladiator Acon Dolly (DL-GDTR-01)
Assembly Manua l
Seat
Flour Board
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Speed Rail
Back sport seat
2 x 16" Pneumac Tires
2 x Pull-out wheel ball pin
Wide round extension
2 x Side BoardsSquare extension
Seat Arm Seat riser (3mm,4mm)Allen key
& 10, 2 x 13 Spanner
Knob
Le/Right Main Secon
Upper wide Board

2
• Remove the pull-out wheel ball pin aached
to the Pneumac Tires with the help of your
hand.
Acon Dolly Setup
• Then secure it properly with the pull-out
wheel ball pin.
• Then, Loosen the knob of the Pneumac
Wheels.
• Slide it open with the help of a push pin buon
ed in a wide round extension.
• Insert the wide round extension in the hole
made in the right/le secon.
• Aach the pneumac wheels with the Right/
Le main secon and insert the pull-out wheel
ball pin.

3
• Then, loosen the knob on the right/le of the
main secon.
• Then aach the wide round extension on the
top part of the secon by following the same
procedure.
• Aach both the le and right main secons
together.
• Extend the length of the round extension by
pressing the push pin buon.
• Insert the wide round extension on the center
part of the main secon and ghten it
properly with the help of a knob.
• Insert the side boards matching the holes of
the main secon.

4
• Then insert the seat arm matching the hole
of the seat riser and secure it properly with
the help of its knob.
• Aach the oorboard by sliding it on the
boom part of the secon.
• Loosen the Provide knob in the main secon.
• Now, Aach the oorboard to the center part
following the same process.
• Place both the side boards on top of the main
secon.
• Match the main secon hole with the seat
riser and insert and ghten the seat riser
properly.

5
• Remove the bolt in the seat arm with the help
of a spanner and 4mm Allen key.
• Insert the seat into the seat arm and secure
the seat properly with the help of its knob.
• Finally, the seat riser or seat arm is properly
aached to the dolly.
• Then insert the seat arm bolt into the seat
arm.
• Then Tighten Properly with The Help of a
Spanner And 4mm Allen Key.
• Insert the speed rail into the side hole of the
main secon, and ghten it properly with the
help of a knob.

6
• Insert the square extension by sliding it into
the speed rail and secure it with the extension
knob by seng the posion.
• Aach the back support seat to the square ex-
tension and ghten both the bolts of the back
support seat with a 4mm Allen key.
• Insert the speed rail into the hole of the back-
side of the main secon and secure it properly
with a knob.
• Pulling the rear steering will cause the wheels
on the main secon to rotate 360° or,
releasing it will lock the wheel again.
• Manually lock and unlock the wheel brake of
the main secon with the help of a hand. As
shown in the image.

7
• Try using the push-pin buon of the wide
round extension, which will convert the size of
the dolly to a slightly narrower size.
• Aer collapsing the round extension, slide the
oor board and insert it, as shown in the im-
age.
• To narrow the size of the dolly, remove the
oorboard.

8
YOUR PROAIM GLADIATOR ACTION DOLLY
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.