PROAIM TP-ULTM-01 User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Ultra Modular Teleprompter (TP-ULTM-01)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Collapsible hood Beam Splier Glass
Quick Release
I -Pad Plaorm
Vesa Mount
Upper Spacer
Hood Spacer
Adjustable Arms
4 x Knobs
2x Cleaning Cloth

2
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Female Mounng rods
4 x bush
Spacer
Hand Gloves
Side Flaps
Male Mounng rods
Belt
L-type (Size:7/32mm)
T-type (Size:4mm)
Bag Packing
Glass protecve Case
• Remove the plate from tripod.
Ultra Modular Teleprompter Setup

3
• Aach universal base plate to the Quick release and
secure it with the help of screw driver.
• Here is the quick release ready to be mount
on tripod.
• Slide quick release while Press the buon to
mount it on tripod and loose all four cornered
knobs of quick release.
• Now add Female mounng rods to the quick
release plate.
• Now mount Hood Spacer on the rods then
secure it by use screw allen key.

4
• Here is hood spacre aached
• Loose the knobs of I-pad plaorm
• Now latch the I-pad plaorm to the hood
spacer.
• Now secure it by ghten the knobs back
again.
• Loose both the knobs which is in the boom
of I-pad plaorm.
• Extend the I-pad holder the ght knob to
secure it.

5
• Now mount spacer to the other end of rods
then secure it by using screw and allen key.
• Here is the spacer aached.
• Now aach male mounng rods on hood
spacer.
• Here is male mounng rods aached.
• Open collapsible hood .
• Now past it on Velcro tape to provide the
collapsible hood a shape.

6
• Loose both the knobs which is on the back of
hood.
• Close tha buckles and ght it.
• Now mount Upper spacer on male rods and
ght the knobs then add screw on rods.
• Lose the middle knob of quick release and
remove camera plate while pressing buon.
• The hood would look like this aer pasng all
Velcro tape.
• Insert male rods into it and close the knobs
back again.

7
• Cover the camera lens with the provide hood
and Tight it.
• Open Velcro from the front of collapsible
hood pull out metal frame.
• Now slide metal frame on glass then insert it
in collapsible hood.
• Now secure it with velcro.
• Aach camera plate to camera and secure it by
using screw driver.
• Mount camera on quick release by sliding and
close knob.

8
• Mount vesa mount on the back side of screen
(Not included) and secure it by adding screws
with allen key.
• Aach the screen (Not included) to
adjustable arm and secure it with knob.
• Past side aps on collapsible hood.
• Remove knob and place adjustable arm on
I-pad plaorm.
• Now secure the arm by aaching knob back
again.

9
YOUR PROAIM ULTRA MODULAR TELEPROMPTER
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.