Rollei DF-S 290 HD User manual

TCO
MARQUE: 52//(,
REFERENCE: ')6(
CODIC: 

ROLLEI DF-S 290 HD
-Patent pending-
User Manual

1
Index
I. Unpack Rollei DF-S 290 HD Professional Scanner...................2
II. Install film into the film holder..............................................3
III. Quick Start............................................................................6
IV. Operation Guide...................................................................9
Capture…………………………………………………………………………………………………….…….………..9
Playback………………………………………………………………………………………………………………….19
Film Type……………………………………………………………………………………………………….…………22
USB Mode……………………………………………………………………………………………………….……….23
Setting Mode…………………………………………………………………………………………………….……..24
V. Specification.......................................................................27

2
I. Unpack ROLLEI DF-S 290 HD
ROLLEI DF-S 290 HD Negative/Slide Film Holder User Manual
USB power core USB/TV/HDMI cable Rapid Slide Feeder Clean brush
We strongly suggest using a clean, dry, non-alcohol cotton
Note
swab to clean the glass surface periodically to produce a
clear image during operation.
Clean dust from FilmScanner back light, to use the clean
brush to wipe the dust.
Dust or dirt from the negative, slide films and cover trays
may affect the scanned image quality, please make sure
the materials are cleaned before inserting into the
scanner.
Please find recommend, processional purger from photo
store to clean the dust on films if any to avoid damaging
the only one copy of old films.

3
II. Install film into the film holder
Install the Slide into holder
1. Open the slide holder as illustrated
2. Put slide into positive slide slot 3. Close the film holder
Install the Negative Film into holder
1. Open the film holder as illustrated
2. Install film into negative film slot 3. Close the film holder

4
Install the Rapid Slide Feeder:
To avoid mirror image, follow the serial numbers (from left to right) on top of film when install
negative film into holder
Note
If the image is upside down [see fig.2], the image can be corrected by Flip function in hard key
of device before capture, or enter playback edit menu after capture [see fig.3 and fig.4].
Figure 1
1． Take out the Rapid Slide Feeder from package
2. Put slides into slide slot, use
Level bar to eject slide
3.Insert the Slide Feeder into the unit

5
Press hard key on top of device in live view
Figure 3
Playback mode menu
Figure 4
Down
Figure 2
Down/Flip button
(Flip hard key)

6
III. Quick Start
Up/Mirror button
Film Slot
OK button
SD card Slot
Down/Flip button
Power button
USB port
TV out jack
Power status LED
FULL HD TV OUT

7
1. Put Film onto the film cartridge
2. Insert the film cartridge into ROLLEI DF-S 290 HD
3. Connect power adapter to ROLLEI DF-S 290 HD
4. Turn on Device by power button

8
5. Press OK button to capture the image
6. Follow the menu on display for scanning
7. After finished the capture, take out the SD card which stored capture images
8. Or read picture from PC by MSDC mode

9
IV. Operation Guide
Home: Main menu
● Capture: capture mode (default)
● Playback: playback mode
● Film Type: define the film type which loaded in cartridge
● USB mode: MSDC (Mass Storage Device Class) mode
● Setting: TV out and format option
1. Capture
After welcome page, above menu will remains for 5 sec. User can press up/down button for desired
menu. Or system will auto enter Capture mode if there is no action during this 5 second period.
1.1 Capture: <Up>/<Mirror> (Hard Key)
<OK> Go Back to
1.1Capture
button
Capture
Up/ Mirror button
Down/ Flip button
Capture
Playback
Film Type
USB mode
Setting

10
● Press <Up > button to enter Mirror/Flip adjustment (see Chapter 1.2)
● Press <Down > button to enter Brightness/Color adjustment (see Chapter 1.3)
1.2 Capture: <Up>/<Mirror> - Flip / Mirror (Hard Key)
● Press <Up > button to change image left to right
< Up >
< Down>
<Up>
<OK> Go Back to
1.1Capture
button
Up/ Mirror button
Down/ Flip button

11
● Press <Down > button to upside down image
1.3 Capture: <Up>/<Mirror> - Brightness/Color (Hard Key)
● Press <Up > button to enter Brightness adjustment (See Chapter 1.4)
● Press <Down > button to enter Color adjustment (See Chapter 1.5)
<Down>
<Down>
<Up>
<OK> Go Back to
1.1Capture
button
Up/ Flip button
Down/ Flip button

12
1.4 Capture: <Up>/<Mirror> - Brightness (Hard Key)
● Press <Up> button to increase Brightness with ranges of -3 to 3
● Press <Down> button to decrease Brightness with ranges of -3 to 3
1.5 Capture: <Up>/<Mirror> - Color Red (Hard Key)
<Up>
<Down>
<OK> Go Back to
1.1Capture
button
Up/ Mirror button
Down/ Flip button
<OK> Go Back to
1.1Capture
button
Up/ Mirror button
Down/ Flip button

13
● Press <Up> button to increase red color with ranges of -3 to 3
● Press <Down> button to decrease red color with ranges of -3 to 3
1.6 Capture: <Up>/<Mirror> - Color Green (Hard Key)
● Press <Up> button to increase green color with ranges of -3 to 3
<Up>
<Down>
<Up>
<OK>
Go Back to
1.1Capture
button
Up/ Mirror button
Down/ Filp button

14
● Press <Down> button to decrease green color with ranges of -3 to 3
1.7 Capture: <Up>/<Mirror> - Color Blue (Hard Key)
● Press <Up> button to increase blue color with ranges of -3 to 3
● Press <Down> button to decrease blue color with ranges of -3 to 3
<Down>
<Up>
<Down>
<OK>
Go Back to
1.1Capture
button
Up/ Mirror button
Down/ Flip button

15
1.8 Capture mode
Once enter capture mode, there will be a red indicator on left top corner to indicate it is in live view
mode. When the film cartridge is inserted into the scanner slot, the image always shows the positive
image according to previous defined Film Type (after power on. the Film Type is default to negative
film). Reconfirm the film position through the display before press OK button.
1.9 Capture: Edit Menu
● Save: save captured image
● Rotate +90: continue rotate +90 degrees
● Rotate -90: continue rotate -90 degrees
(this is for adjusting the user who took the portrait picture)
● Cancel: cancel any editing with this image
● Home: Back to main menu
Live view indicator
(flashing at 0.5sec rate)
Save
Rotate +90
Cancel
Rotate -90
Home
Selected image

16
1.10 Live View -> Capture/Edit Menu
Live View Capture/Edit Menu
Once press OK button in live view, the edit menu will be appeared. When user press OK button again,
the current image will be saved into SD card. The display will return to live view again.
1.11 Capture: Save
Once user press OK button on top of ROLLEI DF-S 290 HD, preview (live view) image will be selected
and shown on the TFT which will take between 3-4 second with 4 icons shown on the left side of the
screen. Save icon will be highlighted for user to confirm the saving by OK button. After the above
step, display goes back to live view mode (preview).
1.12 Capture: Rotate +/-90 degrees
User can apply the up/down button for further editing (rotate +90/-90). Once user confirm rotate
OK
OK
Save
OK

17
+90 degrees, they can press the OK button, the image will be rotate +90 degrees and cursor will
remain at Save. Press OK button again will save the rotated image to SD card and screen will return
to live view. For continuously rotate +90 degrees, move cursor to rotate again and press OK.
1.13 Capture: Cancel
Or select Cancel and press OK button to cancel any of the editing step with present selected image
and ROLLEI DF-S 290 HD goes to live view mode (nothing will be saved onto the SD card).
1.14 Capture: Home
Go back to main menu, press OK button when select Home icon.
1.15 Exit from Edit mode back to Capture mode (Live View)
Once User presses OK button for save or cancel option, display will return to capture mode/live view.
Then, user can move the film cartridge to next target film to capture.
Playback
/captured image
OK
Next image in
film cartridge

18
1.16 Memory full
Once the internal memory or SD card is full, user can see a SD card full once press OK button. User
has to down load the images to PC or replace another SD card for continue capture.
1.17 SD card locked
If the SD was locked, once press the OK button, a SD Card locked icon displays on screen. Please do
slide the switch of SD card to unlock before insert into device.
1.18 SD card error
If scanner cannot detect SD card in good condition, a warning icon with question mark will be shown
on display. Please try to format the SD card or replace another proper SD card for continue further
operation. (Refer to Setting section on page 25.)
OK
SD card locked
indicator
SD card error
indicator