ROOMS TO GO E836A User manual

1
ASSEMBLY INSTRUCTION
E836A SIDE TABLE WITH MIRROR BOTTOM AND GLASS SHELF AND TOP
A
Side Panel
B
Top Frame
C
Stretcher
D
Top Glass
2pcs
1pc
4pcs
1pc
E
Shelf Glass
F
Shelf Mirror
G
Pad
H
End Cap
8mm
16 X16mm
1pc
1pc
12pcs
4pcs
I
Bolt
J
Allen Wrench
1/4”X 1/2”
1/4”
16pcs
1pc
This page lists all the contents included in the box.
Please take the time to identify the hardware as
well as the individual components to this product.
As you unpackand prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.

2
*** Do not tighten screws & bolts until the entire unit is completely assembled.
1
Attach Stretcher (C) to Side Panel (A) by Bolt (I) and Allen Wrench (J) as shown.
2
Attach assembled unit to Top Frame (B) by Bolt (I) and Allen Wrench (J) as shown.
J
I
F
B
J
I
F
A
C
A

3
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or
damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all
connections are tight.
3
Attach End Cap (H) to the bottom of Side Panel (A). Then attach Pad (G) to Top Frame (B) and
Stretcher (C) as shown.
4
Place Top Glass (D), Shelf Glass (E) and Shelf Mirror (F) as shown.
G
H
D
E
F
B
C
A