ROOMS TO GO RCS2303-U6 User manual

VENTURE QUEST
6x18mm
6x17x19mm
8x27x29mm
8x18mm
8x42x44mm
15x8mm
HARDWARE LIST
ROUND HEAD BOLT
FLAT WASHER
ROUND HEAD BOLT
FLAT WASHER
ROUND HEAD BOLT
PLASTIC CAP
ALLEN WRENCH
4 PCS
4 PCS
4 PCS
4 PCS
4 PCS
4 PCS
1 PC
A
B
C
D
E
F
G
RTG SKU#
38002034
38302030
30402032
FINISH
BLACK
BLACK
BLACK
QTY
1 PC
ITEM DESCRIPTION
GAMING CHAIR
GAMING CHAIR
GAMING CHAIR
STYLE#
RCS2303-U6
RCS2303-U6BL
RCS2303-U6GN
Box 2
Box 2
Box 3
Box 3
Box 4
Box 6
This product is manufactured by (BLMD) for
Version#:2022.8
DO NOT USE SUBSTITUTE PARTS. PLEASE CONTACT YOUR RETAIL STORE OR WWW.ROOMSTOGO.
COM WITH SERVICE OR PARTS REPLACEMENT REQUEST
Page:1

Assembly Instructions -Important:
Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when
This product is manufactured by (BLMD) for
Version#:2022.8 Page:2
assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or
information on other products, please visit our website: www.Roomstogo.com or call or write us.
DO NOT USE SUBSTITUTE PARTS. PLEASE CONTACT YOUR RETAIL STORE OR WWW.ROOMSTOGO.
COM WITH SERVICE OR PARTS REPLACEMENT REQUEST
5 (Bellows) - 1 Piece 6 (Seat Plate) - 1 Piece
9（auxiliary cord ）-1Piece
1 (Backrest) - 1 Piece 2 (Seat) - 1 Piece 3 (Base) - 1 Piece 4 (Pneumatic Cylinder) - 1 Piece
1 (Backrest) - 1 Piece 2 (Seat) - 1 Piece
8 (Caster) - 5 Pieces
7 - (Arms 5L & 5R) - 2 Pieces

Step 3 Step 4
Step 1 Step 2
G
Box 2
Insert five Casters (8) into Base (3), push hard until you feel or hear
the Caster (8) snap into place. Insert Pneumatic Cylinder (4) into
Base (3) and slip Bellows (5) over Pneumatic Cylinder (4).
Attach Seat Plate (6) to Seat (2) using four Flat
Washers (B) and four Round Head Bolts (A).
FULLY TIGHTEN BOLTS USING ALLEN WRENCH (G).
Attach Arms (7L & 7R) to Seat (2) and Backrest (1) using two
Round Head Bolts (C) for each Arm (7). DO NOT FULLY TIGHTEN BOLTS.
Attach Backrest (1) to Seat (2) using four Flat Washers (D) and four
Round Head Bolts (D). DO NOT FULLY TIGHTEN BOLTS.
Box 4
5
3
8
4
A
B
6
G
C
G
2
E
D
2
1
1
7R
2
This product is manufactured by (BLMD) for
Version#:2022.8 Page:3
DO NOT USE SUBSTITUTE PARTS. PLEASE CONTACT YOUR RETAIL STORE OR WWW.ROOMSTOGO.
COM WITH SERVICE OR PARTS REPLACEMENT REQUEST

Step 7
Step 5 Step 6
Connect auxiliary cord.
4
F
Cover holes in Arms (7L & 7R) using four Plastic Caps (F) for each Arm (7).Place assembled seat onto Pneumatic Cylinder (4)
and apply downward pressure.
This product is manufactured by (BLMD) for
Version#:2022.8 Page:4
DO NOT USE SUBSTITUTE PARTS. PLEASE CONTACT YOUR RETAIL STORE OR WWW.ROOMSTOGO.
COM WITH SERVICE OR PARTS REPLACEMENT REQUEST

12
FEATURE
• HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever
(1). To lower seat height sit on chair and lift lever(1).
NOTE: It is normal for chair to slightly lower under
body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped
with an adjustment that will allow the user to change
the tension of the tilting feature. Turn knob (2)
clockwise to increase tension and counter-clockwise
to decrease or ease the tension. To lock return chair
to the upright position and push lever (1) in. To unlock
pull lever (1) out.
NOTE: Be careful not to loosen back tilt adjustment knob
completely.
This product is manufactured by (BLMD) for
Version#:2022.8 Page:5
DO NOT USE SUBSTITUTE PARTS. PLEASE CONTACT YOUR RETAIL STORE OR WWW.ROOMSTOGO.
COM WITH SERVICE OR PARTS REPLACEMENT REQUEST

IMPORTANT SAFETY INSTRUCTIONS
Misuse can result in FIRE or DEATH by ELECTRICAL SHOCK
Read all instructions before using this furnishing.
DANGER – To reduce the risk of electric shock:
Always unplug this furnishing from the electrical outlet before cleaning or
servicing.
persons:
Never operate this furnishing if it has a damaged electrical cord or plug,
if it is not working properly, or if the electrical cord or plug has been
damaged or dropped into water. Stop using this furnishing and call a
service center for examination and repair.
Keep the electrical cord and plug away from heated surfaces and other
heat sources.
outlet.
When operating, ensure that electrical cord is not under the base, legs, or
motion mechanism to avoid damage to electrical cord or plug.
Do not strain or stretch electrical cord.
Do not use extension cords or power strips.
Keep out of reach of children. This is not a toy.
Plug direcly into a compatible electrical socket.
Do not modify the plug or use any adapters.
WARNING
5 VDC / 2.0 A
BI12T-050200-BdU
BLUE IRON HOLDINGS LTD
This product is manufactured by (BLMD) for
Version#:2022.8 Page:6
1.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
DO NOT USE SUBSTITUTE PARTS. PLEASE CONTACT YOUR RETAIL STORE OR WWW.ROOMSTOGO.
COM WITH SERVICE OR PARTS REPLACEMENT REQUEST

INSTRUCCIONES DE SEGURIDAD IMPORANTES
El mal uso puede provocar INCENDIO o MUERTE por DESCARGA
ELÉCTRICA
Leer todas las instrucciones antes de usar este mobiliario.
PELIGRO – Para reducir el riesgo de descarga electrica:
Siempre desenchufe este accesorio de la toma de corriente eléctrica antes
de limpiarlo o repararlo.
ADVERTENCIA: para reducir el riesgo de quemaduras, incendios,
descargas eléctricas o lesiones a personas:
Desenchufe del tomacorriente antes de colocar o quitar partes.
Nunca opere este accesorio si tiene un cable o enchufe eléctrico dañado,
si no funciona correctamente, o si el cable o el enchufe eléctrico se ha
dañado o se ha caído al agua. Deje de usar este equipamiento y llame a un
centro de servicio para que lo examinen y lo reparen.
otras fuentes de calor.
Para desconectar, gire todos los controles a la posición de apagado, luego
retire el enchufe del tomacorriente.
Al operar, asegúrese de que el cable eléctrico no esté debajo de la base,
las patas o el mecanismo de movimiento para evitar dañar el cable
eléctrico o el enchufe.
No fuerce ni estire el cable eléctrico.
No utilizar cables de extensión o tomas de corriente.
Mantener fuera del alcance de los niños. Esto no es un juguete
Enchúfelo directamente a una toma de corriente compatible.
WARNING
5 VDC / 2.0 A
BI12T-050200-BdU
BLUE IRON HOLDINGS LTD
This product is manufactured by (BLMD) for
Version#:2022.8 Page:7
1.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
DO NOT USE SUBSTITUTE PARTS. PLEASE CONTACT YOUR RETAIL STORE OR WWW.ROOMSTOGO.
COM WITH SERVICE OR PARTS REPLACEMENT REQUEST