ROOMS TO GO 56135H-10 User manual

ASSEMBLY
INSTRUCTION
ROCKER RECLINER
HLVN 56135H / 56135B
Manufactured for Rooms To o
HLVN SKU:
56135H-10 15356238
56135B-10 15356240
LIST OF PARTS
NO. Description Item Qu ntity
A Backrest 1
B LSF Wing 1
C RSF Wing 1
D Seat 1

ASSEMBLY INSTRUCTIONS
Step 1: Take out carefully the back cushion, wings & seat from the packing.
Step 2: Positing the female metal receiver brackets over the male metal posts. Push down the female brackets
over male posts simultaneously until each side is locked into place an audile "click" is heard.
Step 3: Insert the wings to the back on both sides. Please pay attention to the directions.
WARNINGS
*
Keep
unit
at
least
6
"
from
wall
.
*
Keep
unit
at
least
24
"
from
all
heat
sources
.
* Avoid placing unit in areas where unit can be exposed to direct sunlight other powerful light sources, as fading or
discoloration may occur.
*
Do
not
reach
under
seat
when
mechanism
is
operating
or
serious
injury
may
occur
.
*
Reclining
mechanism
should
only
be
operated
while
seated
properly
.

*
Do
not
sit
on
arms
or
backrest
.
*
Do
not
jump
or
roughhouse
on
furniture
.
*
If
unit
must
be
moved
,
do
not
drag
.
Unit
must
be
lifted
in
order
to
be
moved
.
CARE AND CLEANING
* Upholstered furniture is packaged tightly to protect it during transsit. This packaging can sometimes cause
creases or misshaped cushions when the furniture comes out of the packaging. These issues will correct
themselves over time as the fibers of the cushions are exposed to air. However, shaping the cushions with your
hands can alleviate the creases and compressed fibers more quickly.
* Use a vacuum cleaner to remove dust and debris from seams and crevasses.
* Use a soft damp cloth to gently clean soiled areas and wipe clean. Do not rub.
* Do not use household cleaners or solvents. Such cleaners may cause damage and/or discoloration.
* Do regularly use dedicated leather care product onto the leather furniture to prevent built up of body oils.
TROUBLE SHOOTING
PROBLEM SOLUTION
Backrests gaps Ensure the backrests are properly clipped into the male posts located on seat
mechanism. Check that brackets are not loose, positioned improperly or bent.