ROOMS TO GO ITCO 1407-CC User manual

C
E
D
A
B
ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing material for small parts which may have
come loose inside carton during shipment. Identify and count all parts and compare with the hardware list as below:
Hardware List
Parts List
No. Picture Description Dimension Qty
1
2
3
4
5
JCBC (M6) with washer
JCBC (M6) with washer
Hex Nut
Spring Washer
Flat Washer
6 x P1.0 x 40mm
6 x P1.0 x 70mm
5/16" x 18T x 1/2"
1.5 x 14mm
1.5 x 22mm
2 Pcs
4 Pcs
4 Pcs
4 Pcs
4 Pcs
C.S.K Screw (M4) 4 x 38mm 6 Pcs
6
Allen Key (M4) 4 x 58mm 1 Pc
7
Wrench 1 Pc
8
A1 Pc
B1 Pc
C
D
No. Description
E1 Pc
2 Pcs
2 Pcs
Back Rest
Cushion Seat
Front Leg
Side Stretcher
Front Stretcher
PARTS DETAIL
Qty
ITEM :
DESCRIPTION :
SKU :
Page 1 of 3
2 x 82mm
ITCO
1407-CC / RV-BS-R1350C-CHL-K24
1407-CC CNT HGT STOOL
43414072

Assembly steps
Page 2 of 3
NOTE :
To ensure that chair is levelled, assemble the chair on flat & soft surface. DO NOT tighten all the screws & bolts until
the chair been adjust & level all the legs so that they do not wobble. Once adjusted then only tighten all the screws
using Allen Key while making sure the unit remain level.
STEP 1
STEP 2
STEP 2a
STEP 2b
Assemble seat frame to the backrest.
Assemble front legs to the seat frame with stretcher. DO NOT FULLY TIGHTEN
THE SCREW UNTIL STEP 2b.
Assemble front stretcher
to the leg.
Assemble side stretcher
to the leg.
7
1
A
B
C
E
D
3
5
48

Assembly steps
Page 2 of 3
NOTE :
To ensure that chair is levelled, assemble the chair on flat & soft surface. DO NOT tighten all the screws & bolts until
the chair been adjust & level all the legs so that they do not wobble. Once adjusted then only tighten all the screws
using Allen Key while making sure the unit remain level.
STEP 3
2
7
Assemble seat frame to the backrest.
STEP 4
Assemble side stretcher to the backrest.
STEP 5
Assemble front stretcher to the front leg.
ASSEMBLY
COMPLETE!
6
6