ROOMS TO GO IVY LEAGUE User manual

WARNING DANGER
Failure to follow these warnings and assembly instructions could result in serious
injury or death. To help prevent serious or fatal injuries from entrapment or falls:
-
Read all instructions before assembling bunk bed and keep these instructions for future reference.
-
Before each usage or assembly, inspect bunk bed for damaged hardware, loose joints, missing
parts, or sharp edges. DO NOT Use bunk bed if any parts are missing or broken.
-
DO NOT Use substitute parts. Contact your local Rooms To Go or visit www.ROOMSTOGO.COM
for replacement parts and instructional literature if needed.
-
Follow the information on the warnings appearing on the upper bunk end structure and on the carton,
DO NOT REMOVE WARNING LABEL FROM BED.
-
Always use the recommended size mattress or mattress supports, or both to help prevent the likelihood
of entrapment or falls.
-Ensure thickness of mattress and foundation combine does not exceed
10 inches (255mm
) and
mattress surface is at least
5 inches (127mm)
below upper edge of guardrails.
-
Do not allow children under 6 years of age to use the upper bunk.
-
Periodically check and ensure that the guardrail, ladder, and other components are in their proper
position, free from damage, and that all connectors are tight.
-
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
-
Limit top bunk use to one person.
-
Always use the ladder for entering and leaving the upper bunk.
-
Use of night light may provide added safety precaution for a child using the upper bunk.
-
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to
the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
-
The use of water or sleep flotation mattress is prohibited.
-
This bunk bed meets all the requirements of ASTM 1427-19.
STRANGULATION HAZARD:
Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed; for example, but not limited to, hooks, belts, and jump ropes.
IVY LEAGUE COLLECTION
THANK YOU FOR YOUR PURCHASE
5/12/2022 Page 1 of 4

TWO PEOPLE ARE NEEDED TO ASSEMBLE
DO NOT TIGHTEN COMPLETELY UNTIL ALL PIECES
P A R T S L I S T
3982360P TWIN/TWIN DOUBLE STAIRS BUNK WALNUT
RTG SKU # STYLE # ITEM DESCRIPTION
35723609 3260160 STEP BUNK UNIT
38000232 100-645 TWIN SLAT PACK (4)
38000232 100-645 TWIN SLAT PACK (4)
35723609 3260160 STEP BUNK UNIT
36623608 3260730 4 SIDE RLS/2 GUARD RLS
35713266 3261160 STEP BUNK UNIT
35713266 3261160 STEP BUNK UNIT
35323601 3260744 TRUNDLE BED OPTIONAL
3981326P TWIN/TWIN DOUBLE STAIRS BUNK WHITE
RTG SKU # STYLE # ITEM DESCRIPTION
TWIN SLAT PACK (4)
35313268 3261744 TRUNDLE BED OPTIONAL
36613265 3261730 4 SIDE RLS/2 GUARD RLS
38000232 100-645 TWIN SLAT PACK (4)
PARTS LIST QTY PARTS LIST QTY HARDWARE LIST QTY
16 Pcs
38000232 100-645
TOOLS NEEDED
2 Pc 51 Pc
24 Pcs
Phillips screwdriver (not included)
50 mm Bolts
Step bunk unit Trundle bed (Optional)
24 Pcs
1 1/4" Screws
1
Side rails
1 Pc
Allen wrench (included)
Allen wrench
32 Pcs
Guardrails
48 Pcs
ARE CONNECTED TOGETHER
5/12/2022 Page 2 of 4
Slats
A
B
C

Install slats, one on each end, two equally spaced in the middle,
then fasten with 1 1/4" screws. Repeat step 2 & 3 for top set of side rails.
5/12/2022 Page 3 of 4
ASSEMBLY INSTRUCTIONS
For stairs on the left, first remove the screws, then remove the panel
and install it on the other side and secure with the screws. Assemble bottom side rails.
STEP 4
STEP 3
STEP 2
B
A
C
A
A
A
B
B
C
C
B
A
A
B
A
C
STEP 1
C

Twin size mattress- 74" - 75" long and 37-1/2" - 38-1/2" wide
Twin size Bunkie board- 74" long and 37-1/2" wide
Full size mattress- 74" - 75" long and 52-1/2" - 53-1/2" wide
Full size Bunkie board- 74" long and 52-1/2" wide
Use only correct mattress dimensions and Bunkie board:
PLEASE CONTACT YOUR RETAIL STORE WITH SERVICE OR PARTS REPLACEMENT REQUEST
5/12/2022 Page 4 of 4
ASSEMBLY INSTRUCTIONS
Assemble guardrails and tighten all bolts. For optional Trundle bed follow assembly instructions inside
MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY Trundle bed box, then slide under the bed as shown.
Place Bunkie boards (required, sold separately) on top of the slats
STEP 7
STEP 5
B
A
A
A
STEP 6