ROOMS TO GO HLVN 10021-49 User manual

ASSEMBLY
INSTRUCTION
Power Console Loveseat
HLVN 10021 / 10023 / 10024 /1002A
Manufactured for Rooms o Go
HLVN SKU:
10021-49 15400334
10023-49 15400310
10024-49 15400322
1002A-49 11400316
LIST OF PARTS
NO. Description Item Qu ntity
ABackrest
(LSF, RSF) 2
B LSF Wing 1
C RSF Wing 1
D Seat 1
E Console backrest 1
Friangle nut
(for console) 2
GWall plug
transformer 1

ASSEMBLY INSTRUCTIONS
Step 1: ake out carefully the back cushions from the packing and console's backrest from inner console frame
with its triangle nuts.
Step 2: Positing the female metal receiver brackets over the male metal posts. Push down the female brackets
over male posts simultaneously until each side is locked into place an audile "click" is heard.
Attached the console backrest onto the console frame. Identify the triangle nuts going through the dust cover,
push down the backrest and tighten the screws to lock and so avoid the backrest to move. Repeat this step, twice
for each console.
Step 3: Insert the wings to the back on both sides. Please pay attention to the directions.
POWER CONNECTION
Step 4: Connect wall plug transformer to transformer switch.
And connect transformer plug to electrical outlet.

ELECTRICAL CONTROLS
1
Press
button
to
recline
the
loveseat
&
console
to
desired
position
2
Press
button
to
raise
the
loveseat
&
console
to
the
upright
position
.
WARNINGS
*
Keep
unit
at
least
6
"
from
wall
.
*
Keep
unit
at
least
24
"
from
all
heat
sources
.
* Avoid placing unit in areas where unit can be exposed to direct sunlight other powerful light sources, as fading or
discoloration may occur.
*
Do
not
reach
under
seat
when
mechanism
is
operating
or
serious
injury
may
occur
.
*
Reclining
mechanism
should
only
be
operated
while
seated
properly
.
*
Do
not
sit
on
arms
or
backrest
.
*
Do
not
jump
or
roughhouse
on
furniture
.
*
If
unit
must
be
moved
,
do
not
drag
.
Unit
must
be
lifted
in
order
to
be
moved
.
* Do not continuously operate mechanism for more than one minute or unit may go into protection mode by
shutting down to prevent overheating.
*
Unplug
unit
from
power
source
prior
to
cleaning
mechanism
.
*
Do
not
allow
electrical
components
to
come
into
contact
with
any
liquids
.

CARE AND CLEANING
* Upholstered furniture is packaged tightly to protect it during transsit. his packaging can sometimes cause
creases or misshaped cushions when the furniture comes out of the packaging. hese issues will correct
themselves over time as the fibers of the cushions are exposed to air. However, shaping the cushions with your
hands can alleviate the creases and compressed fibers more quickly.
* Use a vacuum cleaner to remove dust and debris from seams and crevasses.
* Use a soft damp cloth to gently clean soiled areas and wipe clean. Do not rub.
* Do not use household cleaners or solvents. Such cleaners may cause damage and/or discoloration.
* Do regularly use dedicated leather care product onto the leather furniture to prevent built up of body oils.
TROUBLE SHOOTING
PROBLEM SOLU ION
Not Reclining Ensure that wall power outlet is opterational Step 4
Backrests gaps Ensure the backrests are properly clipped into the male posts located on seat
mechanism. Check that brackets are not loose, positioned improperly or bent.