ROOMS TO GO ITCO 6505-DR User manual

1
2
3
4
5
ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing material for small parts which may have
come loose inside carton during shipment. Identify and count all parts and compare with the hardware list as below:
Hardware List
Parts List
No. Picture Description Dimension Qty
Hex Nut 5/16"x 18T x 12mm 8 Pcs
A1 Pc
B4 Pcs
No. Description
Cabinet
Cabinet Legs
PARTS DETAIL
Qty
ITEM: 6505-DR / PA-BR-6506-NMG-C
DESCRIPTION: Dresser
SKU: 32165056
Page 1 of 2
ITCO
8 Pcs
Spring Washer 5/16"x 13mm
B
C1 Pc
Cabinet Center Support Leg
A
C
Flat Washer
Wrench
Furniture tipping restraint
5/16"x 22mm 8 Pcs
1 Pc
1 Set

Assembly steps
Page 2 of 2
NOTE :
Make sure this product assemble on the flat and soft surface. Follow the instructions. Tighten all the nuts, bolts or screws
firmly and make sure this product does not wobble before use.
STEP 1
Assemble cabinet legs and cabinet center leg to the cabinet.
STEP 2
4
A
B
CB
5
C1
23
Screwdriver - Not provided
Note : Adjust leveler to stabilize
"SUGGEST POSITIONING THE TIPPING STRAP AS CLOSE
AS POSSIBLE TO THE TOP CENTER BACK OF THE CASE''
''REFER TO TIPPING KIT MANUFACTURER'S
INSTRUCTIONS FOR ATTACHMENT''