ROOMS TO GO MIYO 9252-C1BK User manual

Q'TY
1PC
PART LISTS
1
2
Caution:
Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed
staple tips can cause injury, therefore, for your protection, please remove any exposed
staple used in packing.
1. We recommend that you should assemble this product with the assistance of another person;
this will make assembly easier, and will help to eliminate damage to the product or injury to
persons during assembly.
2. Be sure to check all packing materials carefully for small parts that may have come loose inside
the carton during shipment.
3. Please do not over tighten screws or bolts.
4. Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to
assemble your newly purchased product correctly and efficiently.
NO. OUTLOOK Q'TY
A
8PCS
HARDWARE LISTS
SIZE
Allen Bolt
5/16" x 18 x 2-3/4"
Page 1 of 3
3
4
1PC
8PCS
8PCS
HARDWARE PACK LOCATION (1)
This product is manufactured by MIYO for
1PC
C
Allen Wrench
4mm
B
Spring Washer
5/16"
Flat washer
5/16" x 19mm x 2mm
Allen Bolt
1/4" x 20 x 1-1/2"
Spring Washer
1/4"
Flat Washer
1/4" x 19mm x 2mm
2PCS
2PCS
2PCS
SEAT
CHAIR BACK
D
S
crew
#4 x 1-3/4" 4PCS
ASSEMBLY INSTRUCTIONS
MIYO 9252-C1BK LADDER BACK CHAIR SKU#42692524
MIYO 9252-C1BL LADDER BACK CHAIR SKU#42792526
MIYO 9252-C1GR LADDER BACK CHAIR SKU#42892528
MIYO 9252-C1WT LADDER BACK CHAIR SKU#42492520
9252-C1BK LADDER BACK CHAIR SKU#42692524
9252-C1BL LADDER BACK CHAIR SKU#42792526
9252-C1GR LADDER BACK CHAIR SKU#42892528
9252-C1WT LADDER BACK CHAIR SKU#42492520
NO.
OUTLOOK SIZE
LEG
(LEFT - RIGHT) 2PCS
2PCS
SIDE STRETCHER
(LEFT - RIGHT)
Screwdrivers (not Included)

STEP 2
STEP 1
Page 2 of 3
This product is manufactured by MIYO for
1
2
B
C
A
C
Attach
the seat with frame to the chair back.
Note:Do not tighten all screws & bolts until the chair is fully assembly.
Attach the seat with frame to the chair back.
Note:Do not tighten all screws & bolts until the chair is fully assembly.
ASSEMBLY INSTRUCTIONS
MIYO 9252-C1BK LADDER BACK CHAIR SKU#42692524
MIYO 9252-C1BL LADDER BACK CHAIR SKU#42792526
MIYO 9252-C1GR LADDER BACK CHAIR SKU#42892528
MIYO 9252-C1WT LADDER BACK CHAIR SKU#42492520

STEP 3
Completed
Page 3 of 3
This product is m
anufactured by MIYO for
Stretcher insert to the front leg and back leg of chair back, then attach front leg to the seat with frame.
Note:Do not tighten all screws & bolts until the chair is fully assembly.
3
3
4
4
A
C
Note:Level the chair and tighten all bolts with the allen wrench.
ASSEMBLY INSTRUCTIONS
MIYO 9252-C1BK LADDER BACK CHAIR SKU#42692524
MIYO 9252-C1BL LADDER BACK CHAIR SKU#42792526
MIYO 9252-C1GR LADDER BACK CHAIR SKU#42892528
MIYO 9252-C1WT LADDER BACK CHAIR SKU#42492520
RIGHT
LEFT
RIGHT
LEFT