ROOMS TO GO SYNE 2179-85PHR User manual

Qty
A LSF Wing 1 D Recliner Base 1
Assembly Instructions
SYNE 2179-85PHR ZG Wall Prox Recliner w/Pwr headrest
SKU# 11521716 11521704 11521728
***CAUTION: The item is heavy, assembly should be performed by two people.
Parts and Hardware List
No Description Image Qty No Description Image
1
C RSF Wing 1
B Back Cushion 1 E Transformer

A
B
D
C
Step2
Locate the power cord C
attached to the bottom back
and connect to plug D located
at the rear of seat.
Step 1
Slide the metal receiver over the
metal post.Press both sides of back
firmly downward until locked in
place.
A
B
C
D
Step 3
Insert the male KD Bracket into the slot
A
B
C
D
Step 4
The Transfomer is attached to the bottom
of rail and connect to DC Port located at
the rear of arm.
Male
Insert the male KD Bracket into the slot
of the female Bracket pressing firmly
downward until the frame is tight.
Female
Note: Make sure all PLUGS are
connected on the product before
plugging power cord into power outlet. If
not damage can occur.
The USB ports (where applicable) are
designed with working voltage of 5V,
and can NOT be used to supply power
for laptop computers (neither PC or
Mac). Plugging a laptop computer to the
USB port may end up damaging either
the computer or the USB port due to
unmatched working voltage.
unmatched working voltage.

Lower headrest
Open recliner
Raise headrest
Raise headrest
Open recliner
Lower headrest
RSF JLDK.67.05.02
C.USB charging ports:
1) USB ports are for charging mobile devices ONLY (not compatible with
computers).
2) Output 5V 2A.
3) DO NOT USE USB SPLITTER/EXTENDERS, DO NOT CHARGE MULTIPLE DEVICES
AT ONE TIME, OTHERWISE DAMAGES COULD OCCUR.
USB port
Close Recliner
USB port
Front
Home
Close Recliner
Front
Home
2179RTG
Function introduction for JLDK.67.05.01/JLDK.67.05.02
A．Functions:
LSF JLDK.67.05.01