ROOMS TO GO KIDS CREEKSIDE 2.0 3914440P User manual

WARNING DANGER
Failure to follow these warnings and assembly instructions could result in serious
injury or death. To help prevent serious or fatal injuries from entrapment or falls:
-
Read all instructions before assembling bunk bed and keep these instructions for future reference.
-
Before each usage or assembly, inspect bunk bed for damaged hardware, loose joints, missing
parts, or sharp edges. DO NOT Use bunk bed if any parts are missing or broken.
-
DO NOT Use substitute parts. Contact your local Rooms To Go or visit www.ROOMSTOGO.COM
for replacement parts and instructional literature if needed.
-
Follow the information on the warnings appearing on the upper bunk end structure and on the carton,
DO NOT REMOVE WARNING LABEL FROM BED.
-
Always use the recommended size mattress or mattress supports, or both to help prevent the likelihood
of entrapment or falls.
-Ensure thickness of mattress and foundation combine does not exceed
10 inches (255mm
) and
mattress surface is at least
5 inches (127mm)
below upper edge of guardrails.
-
Do not allow children under 6 years of age to use the upper bunk.
-
Periodically check and ensure that the guardrail, ladder, and other components are in their proper
position, free from damage, and that all connectors are tight.
-
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
-
Limit top bunk use to one person.
-
Always use the ladder for entering and leaving the upper bunk.
-
Use of night light may provide added safety precaution for a child using the upper bunk.
-
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to
the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
-
The use of water or sleep flotation mattress is prohibited.
-
This bunk bed meets all the requirements of ASTM 1427-19.
STRANGULATION HAZARD:
Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed; for example, but not limited to, hooks, belts, and jump ropes.
CREEKSIDE 2.0 COLLECTION
THANK YOU FOR YOUR PURCHASE
11/7/2022 Page 1 of 97

11/7/2022 Page 75 of 97
1 Pc
Full rail cup
4 Pcs
Casters
Full slats
54 Pc Loft Bookshelf
10
48 Pc
91 Pc
61 Pc Headboard
11 1 Pc
Folding desk (Add on)
Footboard
Guardrails 5 Drw Loft chest
3/8" x 3 1/8" Metal
pin
Allen wrench (included)
24 Pc Full bunkbed end 5 mm Hex key
16 Pcs
81 Pc
Side rails 6 x 1 1/4"
32 Pc
Drywall screw
2 Pcs
FOLDING DESK HARDWARE
2 Pcs
6 x 1 1/4"
Drywall screw
TOOLS NEEDED
11 Pc
71 Pc
24 Pcs
Phillips screwdriver (not included)
5/16"-18 x 3 3/8" Bolt
PARTS LIST QTY PARTS LIST QTY HARDWARE LIST QTY
Full top bunk bed end
1 Pc
37240417 40B-736 FULL RAIL CUP
38000232 100-645 TWIN SLAT PACK (4)
36040412 40B-711 5 DRW. LOFT CHEST
36340418 40B-760 LOFT BOOKSHELF
FULL/FULL SLAT PACK
36240404 40G-601 FOLDING DESK (Add on)
3914441P FULL/FULL LOFT W/CHEST & BOOKCASE CHESTNUT
36640414 40B-730 4 SIDE RLS/2 GUARD RLS
36940410 40B-709 FULL BOTTOM HD/FT
35640413 40B-704 1 PC BUNKBED END FULL
35940419 40B-703 FULL TOP BUNKBED END
P A R T S L I S T
3914440P FULL/FULL LOFT W/CHEST & BOOKCASE CHARCOAL
RTG SKU # STYLE # ITEM DESCRIPTION
35640401 40G-704 1 PC BUNKBED END FULL
36340406 40G-760 LOFT BOOKSHELF
36940408 40G-709 FULL BOTTOM HD/FT
36040400 40G-711 5 DRW. LOFT CHEST
38300238 100-648 FULL/FULL SLAT PACK
36240416 40B-601 FOLDING DESK (Add on)
35940407 40G-703 FULL TOP BUNKBED END
36640402 40G-730 4 SIDE RLS/2 GUARD RLS
37240405 40G-736 FULL RAIL CUP
RTG SKU # STYLE # ITEM DESCRIPTION
38000232 100-645 TWIN SLAT PACK (4)
38300238 100-648
A
B
C
D
E
C

CASES ON THE LEFT
CASES ON THE RIGHT
CASES ON THE RIGHT CASES ON THE LEFT
Assemble bookshelf and chest, using the fastening board and bolts previously removed, align both pieces and tight completely as shown.
11/7/2022 Page 76 of 97
FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM
First choose which configuration fits your room ( left or right),
For Right remove center molding by lifting up then pulling out, then
ASSEMBLY INSTRUCTIONS
remove third drawer, for Left remove center molding and open the door. Remove fastening board and save for next step.
STEP 3
STEP 2 STEP 1 B
B
B

11/7/2022 Page 77 of 97
then fasten with 1 1/4" screws. MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY
Assemble side rails Install slats, one on each end and two equally spaced in the middle,
MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY then fasten with 1 1/4" screws
ASSEMBLY INSTRUCTIONS
Assemble loft chest, loft bookshelf and top bunk bed end. Assemble top side rails.
Install slats, one on each end, two equally spaced in the middle, Assemble guardrails and tighten all bolts.
STEP 8
STEP 5
STEP 6
E
STEP 4
B
STEP 7
A
A
A
A
D
D
D
D
B
A
B
A
A
A
A
A
C
C
A
A
A
A
B
B
A
STEP 9
C

Twin size mattress- 74" - 75" long and 37-1/2" - 38-1/2" wide
Twin size Bunkie board- 74" long and 37-1/2" wide
Full size mattress- 74" - 75" long and 52-1/2" - 53-1/2" wide
Full size Bunkie board- 74" long and 52-1/2" wide
11/7/2022 Page 78 of 97
Place Bunkie boards (required, sold separately) on top of the slats
Use only correct mattress dimensions and Bunkie board:
PLEASE CONTACT YOUR RETAIL STORE WITH SERVICE OR PARTS REPLACEMENT REQUEST
Install casters in headboard and footboard, and set rail cup. Slide Caster bed under Loft bed as shown.
ASSEMBLY INSTRUCTIONS
STEP 12
STEP 10
STEP 11
E
E
G

Place folding desk by sliding into the opening of loft chest
then push down
11/7/2022 Page 79 of 97
Remove center molding by lifting up then pulling out Unfold desk leg and look for hardware pack inside desk box.
Secure each corner block with 1 1/4" screw
Unfold corner supports (from desk box hardware pack) in the pre-bore hole.
ASSEMBLY INSTRUCTIONS
STEP 10
STEP 12
STEP 11
STEP 13
STEP 14
C
C