ROOMS TO GO MIYO 92321-2 User manual

Caution:
Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed
staple tips can cause injury, therefore, for your protection, please remove any exposed staple used in
packing.
1. We recommend that you should assemble this product with the assistance of another person;
this will make assembly easier, and will help to eliminate damage to the product or injury to persons during
assembly.
2. Be sure to check all packing materials carefully for small parts that may have come loose inside the carton
during shipment.
3. Please do not over tighten screws or bolts.
4. Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your
newly purchased product correctly and efficiently.
STEP 1
ASSEMBLY INSTRUCTIONS
Page 1 of 2
2
1
2
This product is m
anufactured by MIYO for
MIYO 92321-2 END TABLE SKU# 23009233
Place the Table Top (1) bottom side up carefully. Secure Table Leg (2) to the Table Top (1) with Allen
Bolt, Spring Washer and Flat Washer (A) using Allen Key (B),do not tighten all bolts at this time.
HARDWARE PACK LOCATION (1)
92321-2 END TABLE SKU#23009233
NO. SKETCH Q'TY
1PC
2PCS
PART LISTS
DESCRIPTION
1
2
TABLE TOP
TABLE LEG
NO. OUTLOOK Q'TY
A
10PCS
HARDWARE LISTS
SIZE
Spring Washer
5/16"
Flat washer
5/16" x 19mm x 2mm
B1PC
Allen Wrench
4mm
Allen Bolt
5/16" x 18 x 2-1/2''
3
SHELF 1PC
A
B
10PCS
10PCS

STEP 2
Page 2 of 2
A
B
3
This product is m
anufactured by MIYO for
ASSEMBLY IS COMPLETED.
Ensure that it is level and square and tighten all bolts using Allen Key (C).
STEP 3
Attach the Shelf (3) to the Table Leg (2) with Allen Bolt, Spring Washer and Flat Washer (B)
using Allen Key (B).
ASSEMBLY INSTRUCTIONS
MIYO 92321-2 END TABLE SKU# 23009233