Rose electronics UltraConsole Remote UCR-1R1X04U User manual

UltraConsole Remote
WWW.ROSE.COM
Single user KVM switch over IP
Access computers, servers, and serial devices locally,
over the network, or from anywhere in the world
Multi-platform design makes it compatible with PCs,
SUN, UNIX, Linux, USB, and Serial devices
Supports Serial devices such as routers and emulates
VT100/VT220 terminals
Secure encryption operation
Scaling, scrolling, auto-size and quad screen features
In an expanded system, connect to as many as 1,000
computers, servers or serial devices
Features and Benefits
JAvailable in 4, 8, or 16 CPU port models, expandable
to as many as 1,000 CPUs
JControl PCs, SUN, UNIX, Linux, USB, and serial
devices from a single console station locally, over the
network, or from anywhere in the world
JVideo resolution up to 1280 x 1024 @ 75 Hz
JSolid-state embedded unit for maximum reliability
JPlug-in expansion cards and the unit’s modular design
make it simple to install, expand, and maintain
JOn-screen menu informs you of connection status
between units in an expanded system
JQuad screen mode allows you to view four servers
from one screen in real time
JSecurity system with user ID, password and profile
prevents unauthorized configuration and controls
computer access
JFront panel shows power and current connected input
port (Network, serial, or local KVM)
JPre-configuration feature allows installation without
powering down most servers
JStatus screen displays inter-unit connections,
communications, computer power, and other system
information
JMulti-lingual menu (English, French, German, Spanish,
Italian, Portuguese)
JFlash memory technology allows for fast and reliable
upgrades
JFree firmware upgrades for product
enhancements and new software
features available at www.rose.com
JRackmount kits available in 19”, 23”, and 24”
sizes
JMade in USA
The UltraConsole™ Remote Advantage
The UltraConsole Remote represents the latest in
remote KVM access over IP technology. The
UltraConsole Remote allows for a central user station to
connect to four, eight, or sixteen computers per chassis,
expandable to as many as 1,000 computers or serial
devices. The user station can be access locally, over the
network, or from anywhere in the world.
The UltraConsole Remote series is available in 1 x 8, and
1 x 16 models. Units easily connect together to make a
seamless and truly scalable Remote KVM solution.
The advanced design of the UltraConsole Remote uses
networking communication technology to reduce cost,
eliminate single points of failure, and increase reliability.
The on-screen menus make configuring, monitoring, and
installation easy with on-screen instructions and help.
Use the on-screen menus to name computers, select
computers, view connections, assign users, configure
system security, and other features.
The UltraConsole Remote provides serial support to
access computers, routers, Ethernet hubs, UNIX devices
and more.
It can perform as a “VT100/VT220” terminal emulator
with an eight-page scroll buffer.
Local connection, security, flash memory, system status
and many other features ensure that the UltraConsole
Remote will streamline your data center or server
room and provide a central access point for your
system both locally or over your network.
Your servers are
accessible wherever
you are

Phone: [phone] E-mail: [email protected] 
10707 Stancliff Rd. Houston, TX 77099
Rose Electronics – Europe: [phone] Rose Electronics – Asia: [phone]
DS-UCR-1.2 Copyright 2005 Rose Electronics. All rights reserved WWW.ROSE.COM
Typical Application
Models The UltraConsole Remote is available in several
models. They have fixed port configuration and plug-in
expansion cards. There are models that connect a user to 4,
8, or 16 computers. Adding additional units can expand the
system to as many as 1,000 computers.
Cables Rose’s UltraCable streamlines cable connections to
UltraConsole Remote, simplifying cable management and
improving system reliability. Order the computer or user
cables by the computer’s connector style and desired length.
Installation UltraConsole Remote is easy to install and
configure. You simply connect your computers and a KVM
station to the UltraConsole Remote ports; connect the unit to
your network and configure the network information. Install
the remote viewer software on the network workstations
needing access and you’re done.
Operation Operating the UltraConsole Remote is as easy as
using your own computer. Use simple keyboard commands
to access computers and view system status. Helpful screen
messages indicate the status of all connections.
On-screen display UltraConsole Remote excels with its on-
screen menu system. The intuitive interface uses pop-up
menus to make selections. User-friendly help lines are shown
for each item. The interface can be programmed for English,
French, German, Spanish, Italian, or Portuguese. You can
easily configure CPU names, security, appearance, and many
other features.
Serial devices The UltraConsole Remote’s OSD is so powerful
that it is actually a color VT220 terminal emulator. You can
configure any computer port to be serial. When you connect to a
serial device, you get a 24x80 screen with two status lines. You
can access the serial device just as if you were connected with a
terminal. Linux serial ports will show directory lists in color.
Flash Memory To support the latest devices, UltraConsole
Remote contains flash memory. We provide free, lifetime
firmware upgrades, available from www.rose.com.
Keyboard and Mouse UltraConsole Remote fully emulates
the keyboard and mouse. It works on all major operating
systems such as Windows, Solaris, Linux, UNIX, SGI, and
OSX. Use any combination of PS/2, USB, and SUN including
PS/2 wheel and serial mice. It is compatible with European
and Asian keyboard languages.
Part numbers
Model CPU ports RackMount Kit
UCR-1R1X04U 4 RM-UB-nn
UCR-1R1X08U 8 RM-UBnn
UCR-1R1X16U 16 RM-UCnn
(nn=19”, 23”, or 24”)
(/E part number suffix = With expansion card)
UMC-EXP2 Expansion card DB15 Style
(/ERJ part number suffix = With RJ45 expansion card)
UMC-EXP2RJ Expansion card RJ45 Style)
Specifications
#CPU
Ports Width In / cm Depth In / cm Height In / cm
4 16.7 / 42.4 15.2 / 38.6 1.75 / 4.5
8 16.7 / 42.4 15.2 / 38.6 1.75 / 4.5
16 16.7 / 42.4 15.2 / 38.6 3.50 / 9.0
#CPU
ports Weight lbs / kg
4 6.9 / 3.1
8 9.3 / 4.2
16 14.0 / 6.4
Connectors Power – IEC320
CPU/KVM – DB25F
Expansion – DB15M/F
RS232 – RJ12 (6-pin)
Network - RJ45
Power 90 – 240 VAC, auto-switching
Bandwidth 1 x 8 – 250MHz / 1 x 16 – 100MHz
Video sync HV sync, composite, sync-on-green
Controls Power on/off switch, port selector switches
Indicators Chassis Power, CPU select, CPU power
Chassis Electro-galvanized steel, black powder
coated (Top cover)
Environmental 0°-45°C, 5%-80% non-condensing RH
Approvals FCC, VCCI, UL, cUL, TUV, CE
Rear view - UCR 1x4, 1x8, 1x16
(Shown with expansion cards)