Ross Synergy 1 SD User manual

4999DR-085-05
GVG Contribution Serial Tally
(protocol) — Panel
Requirements
• Serial Tally Software Option
• Serial Interface Cable
Port Connections
Switcher Setup
1. Press HOME Setup Installation Com Setup 
Type.
•UsetheCom Port knob to select the REMOTE X port that
you connected the Serial Tally device to.
•UsetheDevice knob to select Serial Tally.
2. Press Select Device.
•UsetheDevice knob to select Contrib.
3. Press Com Type.
•UsetheType knob to select RS-422 (default).
4. Press Com Settings.
•UsetheBaud knob to select 115200 (default).
•UsetheParity knob to select NONE (default).
5. Press Extra Options.
6. Press HOME Confirm.
Slot Settings
Compatibility
Switcher Serial Tally
Communications REMOTE Port
(female) Serial Port
Extra Options Value
Rate 26 (default)
Data Txfr Complete
(default)
Start None (default)
At Black All Off (default)
Source Name Bnc Name
(default)
Slot 1 - PGM See Slot Settings
Slot 1 Slot 2 Slot 3 Slot
PGM
1 MLE Switcher 2 3 4 1
2 MLE Switcher 3 4 1 2
3 MLE Switcher 4 1 2 3
4 MLE Switcher 1 2 3 4
Serial Tally Version
GVG Serial Tally device --
Switchers
Synergy 1 SD 17.10
Synergy Series SD 17.10
Synergy MD/X 3.3
Vision MD/X 7.1
Vision QMD/X 11.0a
Vision MultiPanel Support --
Automation
OverDrive 3.0
Port Expanders
BSS4 
Comtrol DeviceMaster 

10