Ross Synergy 1 SD User manual

4999DR-171-01
Merging Technologies Ovation Media
Server
Requirements
• Audio Server Interface Software Option
• Ethernet Cable
Switcher Setup
To Set Up Communications
1. Press HOME Setup Installation Com Setup 
Type.
•UsetheCom Port knob to select the REMOTE Xport that
you want to assign the Ovation to.
•UsetheDevice knob to select Audio Server.
2. Press Select Device.
•UsetheDevice knob to select Ovation.
3. Press Com Type.
•UsetheType knob to select Network TCP.
4. Press Com Setting.
5. Use the Client/Server knob to select Client.
•IntheRemote IP Address field, enter the IP address of the
Ovation.
•IntheRemote Port field, enter 5555. Use this value unless
told otherwise by the Merging Ovation documentation.
6. Press HOME Confirm.
Device Setup
The Merging Ovation must have the OASIS security USB key
installed.
1. Click Settings > All Settings > ApplicationSettings >
General > TCP/IP Connections.
2. Configure one of the IP ports to the following:
• Type: Server
• IP/Name: 0.0.0.0
• Port: 5555
• Transport: TCP
3. Click Settings > All Settings > ApplicationSettings >
Controller Units > IP > (the port selected in step 2).
4. Click Enable.
5. On the protocol list, click Ovation Native.
6. De-select Send status feedback via Player selection.
7. Click OK.
Compatibility
Audio Server Version
Merging Ovation 4.04
Switchers
Synergy 1 SD --
Synergy Series SD --
Synergy MD/X --
Vision MD/X --
Vision QMD/X 16.1a
Vision MultiPanel Support --
Automation
OverDrive 12.0
Port Expanders
BSS4 
Comtrol DeviceMaster 

10