Rosslare SA-17 User manual

SA-17
Installation Instructions Wireless Rate-of-Rise Heat
Detector
1
0706-0960018+00
1. Introduction
The SA-17 Wireless Heat Detector is a supervised system for
detecting high temperatures and sudden temperature
increases within an area.
The detector can be used in any residential or commercial
location, requires no wiring and is fully equipped for RF wireless
control from a central security unit. The detector is easy to
install and powered by one 9V battery, giving a typical battery
life of one year.
Mount the detector on the SA-13 RF base. Using the SA-13's
wireless transmitter, the detector can connect to any standard
wireless security system. For best performance, Rosslare
recommend using the SA-17 with our custom designed
HomeLogiX and SP-03 wireless security panels. The SA-13 is
powered by an additional 9V battery.
The detector has anti-tampering sensors on its cover and back
plate, and sends a standard status message to its host security
panel every 20 minutes. When the unit's battery is running low,
the unit beeps, flashes its LED indicator and sends an alert
message to its host control panel.
NOTE: The SA-17 Heat Detector is not designed as a
substitute for a primary fire detection system.
2. Technical Specifications
2.1 Electrical Characteristics
Battery: IEC 6LR61 (9V Carbon-Zinc) or
IEC 6LF22 or MN1604 (9V Alkaline)
Detector Current Standby: 10µA
Alarm State: 10–15mA
Transmitter Current Standby: 16 µA
Transmitting: 16mA
Battery Life 1 year
Low Battery
Detection Last 7 days of battery life
2.2 Environmental Characteristics
Environment Indoor Use
Operating Temperature: 0°C–40°C (32°F –104°F)
Operating Humidity 10% to 90% Non-Condensing
2.3 Physical Characteristics
Alarm Temperature 70°C ±5°C
Alarm Rate-of-Rise 12°C per minute
Operation Indicators: LED and siren
Siren Volume: 85dB at 3m (10ft)
Dimensions: 48mm height, 107mm diameter
(1.89" height, 4.21" diameter)
Weight: 206 grams (7.266 oz)
2.4 Standards
USA: NFPA #74,
UL 217,
FCC
Europe: CE,
ETSI
3. Installation
The SA-17 is a single station detector and must not be
connected to other fire alarm systems.
3.1 Location
For full protection, every room should have a heat detector
fitted. At the very least, a home built on a single storey should
have at least one heat detector in the hall, close to all the
living areas, including bedrooms and kitchens. Ensure the alert
siren is audible from every room.
In a home with more than one storey, at least one heat
detector should be fitted on each landing and at the bottom
of the staircase.
3.2 Mounting the Detector
Before mounting the SA-17 Heat Detector, ensure that your
chosen mounting area is not in front of any electrical wiring or
pipe work.
Mark two mounting points in the wall, using the SA-13 mounting
bracket.
Drill into the marked points and insert wall plugs.
Screw the mounting bracket into the wall. Be careful not to
over-tighten the screws.
Insert a battery into the SA-17 Heat Detector and push down
the metal tab fully.
Attach the detector to the mounting bracket.
NOTE: Do not paint or cover the detector.
Test
Button

2
0706-0960018+00
4. Operating the Heat Detector
4.1 General Use
During normal operation, the heat detector's LED indicator
should flash once a minute.
When the unit records dangerously high temperatures or
detects that the temperature in the area is increasing at a
dangerously high speed, it triggers its built-in siren. If the
detector is connected to a wireless security network, it sends
an alert message to the host security panel.
The siren stops when the temperature has fallen back below
the danger level or the rate of temperature increase has
slowed. An "all clear" message is sent to the host security
panel.
As standard, the heat detector will trigger an alert when it
detects temperatures of 70°C or more, or registers that the
temperature is increasing at more than 12°C per minute. The
trigger values are controlled by a factory setting and can be
adjusted to meet specific client needs. Contact Rosslare
Security for more information.
4.2 Testing the Detector
To test the Heat detector, push and hold the self-test button for
3 seconds. A loud pulsating siren sounds and the LED indicator
flashes quickly.
Rosslare recommend testing your heat detector once every
week. A Heat detector installed in a car or other non-
commercial vehicle should be checked before any long
journeys, and whenever the vehicle has been in storage for an
extended period of time.
4.3 Maintenance
Dust and dirt reduce the Heat detector's sensitivity. Clean your
heat detector regularly, by passing a vacuum cleaner with a
brush attachment gently over the front grilled sections and
sides of the heat detector.
When the detector's battery is low, the detector beeps once
every minute. If the detector is connected to a wireless security
network, it sends a low battery warning message to the host
control panel.
The heat detector continues operating with a low battery for
at least 7 days.
5. Limited Warranty
ROSSLARE ENTERPRISES LIMITED S (Rosslare) ONE YEAR LIMITED WARRANTY is
applicable worldwide. This warranty supersedes any other warranty. Rosslare's ONE
YEAR LIMITED WARRANTY is subject to the following conditions:
Warranty
Warranty of Rosslare's products extends to the original purchaser (Customer) of the
Rosslare product and is not transferable.
Products Covered By This Warranty and Duration
ROSSLARE ENTERPRISES LTD. AND / ORSUBSIDIARIES (ROSSLARE) warrants that
the SA-17 Wireless Heat Detector, to be free from defects in materials and assembly in the
course of normal use and service. The warranty period commences with the date of
shipment to the original purchaser and extends for a period of 1 year (12 Months).
Warranty Remedy Coverage
In the event of a breach of warranty, ROSSLARE will credit Customer with the price of the
Product paid by Customer, provided that the warranty claim is delivered to ROSSLARE by
the Customer during thewarrantyperiodin accordance with the terms of this warranty.
Unless otherwise requested by ROSSLARE ENTERPRISES LTD. AND / OR
SUBSIDIARIES representative, return of the failed product(s) is not immediately required.
If ROSSLARE has not contacted the Customer within a sixty (60) day holding period
following the delivery of the warranty claim, Customer will not be required to return the
failed product(s). All returned Product(s), as may be requested at ROSSLARE
ENTERPRISES LTD. AND /OR SUBSIDIARY’S sole discretion, shall become the property
of ROSSLARE ENTERPRISES LTD. AND /OR SUBSIDIARIES.
To exercise the warranty, the user must contact Rosslare Enterprises Ltd. to obtain an
RMA number after which, the product must be returned to the Manufacturer freight prepaid
and insured
In the event ROSSLARE chooses to perform a product evaluation within the sixty (60) day
holding period and no defect is found, a minimum US$ 50.00 or equivalent charge will be
applied to each Product for labor required in the evaluation.
Rosslare will repair or replace, at its discretion, any product that under normal conditions of
use and service proves to be defective in material or workmanship. No charge will be
applied for labor or parts with respect to defects covered by this warranty, provided that the
work is done by Rosslare or a Rosslare authorized service center.
Exclusions and Limitations
ROSSLARE shall not be responsible or liable for any damage or loss resulting from the
operation or performance of any Product or any systems in which a Product is
incorporated. This warranty shall not extend to any ancillary equipment not furnished by
ROSSLARE, which is attached to or used in conjunction with a Product, nor to any Product
that is used with any ancillary equipment, which is not furnished by ROSSLARE.
This warranty does not cover expenses incurred in the transportation, freight cost to the
repair center, removal or reinstallation of the product, whether or not proven defective.
Specifically excluded from this warranty are any failures resulting from Customer's
improper testing, operation, installation, or damage resulting from use of the Product in
other than its normal and customary manner, or any maintenance, modification, alteration,
or adjustment or any type of abuse, neglect, accident, misuse, improper operation, normal
wear, defects or damage due to lightning or other electrical discharge. This warranty does
not cover repair or replacement where normal use has exhausted the life of a part or
instrument, or any modification or abuse of, or tampering with, the Product if Product
disassembled or repaired in such a manner as to adversely affect performance or prevent
adequate inspection and testing to verify any warranty claim.
ROSSLARE does not warrant the installation, maintenance, or service of the Product.
Service life of the product is dependent upon the care it receives and the conditions under
which it has to operate.
In no event shall Rosslare be liable for incidental or consequential damages.
Limited Warranty Terms
thiswarranty sets forth thefull extentof rosslare enterprises ltd. and its subsidiaries
warranty.
the terms of this warranty may not be varied by any person, whether or not purporting to
represent or act on behalf of rosslare.
this limited warranty is provided in lieu of all other warranties. all other warranties expressed
or implied, including without limitation, implied warranties of merchantability and fitness for
a particular purpose, are specifically excluded.
in no event shall rosslare be liable for damages in excess of the purchase price of the
product, or for any other incidental, consequential or special damages, including but not
limited to loss of use, lossof time, commercial loss, inconvenience, and loss of profits,
arising out of the installation, use, or inability to use such product, to the fullest extent that
any such loss or damage may be disclaimed by law.
this warranty shall become null and void in the event of a violation of the provisions of this
limited warranty.
6. Contact information
Asia Pacific, Middle East, Africa
Headquarters:
905-912 Wing Fat Industrial Bldg, 12 Wang Tai Road, Kowloon Bay HK
Tel: [phone] Fax: [phone]
E-mail: [e-mail]
United States and Canada
1600 Hart Court, Suite 103 Southlake, TX, USA 76092
Toll Free: [phone] Local: [phone] Fax: [phone]
E-mail: [e-mail]
Europe
Global Technical Support & Training Center:
HaMelecha 22 Rosh HaAyin, Israel 48091
Tel: [phone] Fax: [phone]
E-mail: [e-mail]
South America
Pringles 868, 1640 Martinez Buenos Aires Argentina
Tel: [phone] Fax: [phone]
E-mail: [e-mail]
Web Site: www.rosslaresecurity.com