Royal Sovereign ARP-1000ES User manual

Royal Centurian Inc.
PORTABLE AIR CONDITIONER
ACONDICIONADOR DE AIRE PORTÁTIL
Read and retain these instructions for future reference
For any Customer Support needs, please choose
the Support tab on www.royalsovereign.com
ARP- 1000ES
OWNER’S MANUAL
ARP-1000ES
PORTABLE AIR CONDITIONER

PORTABLE AIR CONDITIONER
Model ARP-1000ES
INTRODUCTION
Thank you for choosing this air conditioner to provide you and your family with all of the "Home Comfort" requirements for your home,
apartment, or office. This appliance can be moved from room to room and set-up in just minutes.
It is multi-functional room air conditioner that offers you Conditioning, Dehumidify, and Independent Fan modes.
This manual will provide you with valuable information necessary for the proper care and maintenance for your new appliance. Please
take a few moments and read the instructions thoroughly. If properly maintained, your appliance will give your many years of trouble free
operation.
Electrical Specifications
1. All wiring must comply with local and national electrical codes and be installed by a qualified electrician. If you have any questions
regarding the following instructions, contact a qualified electrician.
2. Check available power supply and resolve any wiring problems before installation and operation of this unit.
3. For your safety and protection, this unit is grounded through the power cord plug when plugged into a matching wall outlet. If you are
not sure whether the wall outlets in your home are properly grounded, please consult an electrician. Do not use plug adapters or
extension cords with this unit.

WARNING - Make sure rubber plug is installed in drain port on bottom of the machine.
Improper handling can cause serious damage to the appliance. Read this manual carefully before operating the unit.
3
Do not cover the
air outlet while in
use.
Do not wet the
housing or control
panel.
Do not allow
children to play
with the controls or
drop any objects
into the outlet.
Always turn the
unit off and remove
the power plug
from the socket
when cleaning.
Do not place
objects or let any
person sit on top of
the unit.
Do not attempt to
remove any part of
the casing unless
by an authorized
technician.
Use only the
correct power
supply AC
115V/60Hz.
Remove the plug
from the socket if
the unit is not
being used for long
period.
Do not operate the
unit with damaged
plug or loose
socket point.
Make sure that the back of the unit is at least 4" or more from a wall. Do not place the unit in front of curtains or drapes.
WARNING
-If the power cord on this unit is damaged, it must be replaced by the manufacturer service agent or qualified electrician.
-This appliance is not intended for use by children.
ARP-1000ES

4
DESCRIPTION OF COMPONENTS
1. Control panel
2. Air outlet (Up-Down and Left-Right)
3. Front panel
4. Handle hole
5. Casters
6. Screen filter
7. Air intake (Evaporator)
8. Air intake (Condenser)
9. Air outlet (Heat exchange)
10. Water drain with rubber plug

5
1. Insert ends of exhaust hose into exhaust nozzle connector and exhaust hose connector by twisting clockwise
until it stops.
2. Attach the exhaust hose connector onto the rear outlet of the unit and turn to the right.
3. Attach the exhaust nozzle to the window spacer with the 4 screws provided.
4. Connect the exhaust nozzle connector to the exhaust nozzle.
5. Extend the exhaust hose and close the window as far as possible trapping the exhaust nozzle as shown below .
6. Install rubber plug as shown below.
INSTALLATION INSTRUCTIONS
Connect exhaust hose assembly to the back of the unit. Extend hose to desired length and locate the exhaust nozzle through a window or
wall for ventilation.
DO NOT add additional hose length. This will diminish the efficiency of the unit. Window spacer only comes in one size. Good for double
hung or slider window only.
EXHAUST ASSEMBLY AND INSTALLATION
Exhaust nozzle Exhaust nozzle connector Exhaust hose Exhaust hose connector
ARP-1000ES
Insert exhaust nozzle from rear.
Attach screws from front.
Exhaust nozzle connection
rubber plug