RTS XCP-16-DB9-T Firmware update

July 2006 Rev E
Breakout Panel
Resource Guide
includes:
XCP-955
XCP-32-DB9
XCP-16-DB9-T
XCP-48-RJ45
XCP-48-TELCO
XCP-40-DB9
XCP-40-RJ11
XCP-24
XCP-24-USOC
XCP-ADAM-MC
LIT000061000

Table
of
Contents
Breakout Panel Introduction ...................................................................................................................... 1
XCP-955 - 8800303674 .............................................................................................................................. 3
XCP-32-DB9 - 9000-7810-000 ................................................................................................................... 7
XCP-16-DB9-T - 9000-7837-000 ............................................................................................................... 9
XCP-48-RJ45 - 9000-7809-000 ................................................................................................................ 11
XCP-48-Telco - 9000-7822-000 ............................................................................................................... 13
XCP-40-DB9 - 9000-7515-000 ................................................................................................................. 19
XCP-40-RJ11 - 9000-7494-000 ................................................................................................................ 21
XCP-24 - 9000-7559-000 .......................................................................................................................... 23
XCP-24-USOC - 9000-7559-001 .............................................................................................................. 27
XCP-ADAM-MC - 9002-7514-100 ........................................................................................................... 31

1
CHAPTER 1
Breakout Panel Introduction
Breakout Panels provide a convenient way of expanding the port capacity of an ADAM intercom system. Currently, there are
seven breakout panels for use with the AIO cards: XCP-32-DB9, XCP-16-DB9-T,XCP-48-RJ45, XCP-48-Telco, XCP-40-
DB9, XCP-40-RJ11, XCP-955, XCP-24, and the XCP-24-USOC.
Installation
Requirements
•Have the new ADAM power supply installed (p/n - 9020-7515-001).
•In a single frame system, have the Master Controller firmware 9.22.0 or higher installed.
•In a multi-frame system have:
the Peripheral Controller firmware 10.13.x or higher installed
the DBX firmware 1.13.0 or higher installed.
IMPORTANT!!! Use the following instructions for you initial setup of an AIO-16 card. If you do not follow these directions,
the AIO-16 card may not work properly.

Breakout Panel Introduction
2
To install the AIO-16 card for the first time, do the following:
1. Gently insert the AIO-16 card into the appropriate ADAM slot.
2. Lightly tighten down the AIO-16 card.
3. Carefully attach the backcard (MDR or SCSI,) to the AIO-16 card from the back of the ADAM. Verify it is properly seated
against the AIO-16 card and is sitting firmly in the system.
4. Tight the backcard to the frame
5. Fully tighten down the AIO-16 from the front of the system.
NOTE: Once you have done this, you do not have to repeat this everytime.
6. Attach the desired breakout panel to the AIO-16’s backcard connector.
TABLE 1. MDR backcard and connector.
TABLE 2. SCSI backcard and connector

3
CHAPTER 2
XCP-955
8800303674
The XCP-955 is the 25-port RJ-11 breakout panel with SCSI
connector for the ADAM.
Specifications
Dimensions:
18.98” (482mm) L x 1.69” (43mm) H x 0.55” (104mm) D
Weight:
1.6 lb (.725 kg)
J28
DATA
J27
AUDIO DESTINATION
J26
AUDIO SOURCE
XCP-955
XCP-955
RTS SYSTEMS
RJ-12 Connector
Pin 1 Keypanel Data -
Pin 2 Audio Out +
Pin 3 Audio In +
Pin 4 Audio In -
Pin 5 Audio Out -
Pin 6 Keypanel Data +

XCP-955 8800303674
4
Telco Backcard - Telco Connector - J26
Pin
Number Port Function
1 1 Audio From Matrix +
26 1 Audio From Matrix -
2 2 Audio From Matrix +
27 2 Audio From Matrix -
3 3 Audio From Matrix +
28 3 Audio From Matrix -
4 4 Audio From Matrix +
29 4 Audio From Matrix -
5 5 Audio From Matrix +
30 5 Audio From Matrix -
6 6 Audio From Matrix +
31 6 Audio From Matrix -
7 7 Audio From Matrix +
32 7 Audio From Matrix -
8 8 Audio From Matrix +
33 8 Audio From Matrix -
9 9 Audio From Matrix +
34 9 Audio From Matrix -
10 10 Audio From Matrix +
35 10 Audio From Matrix -
11 11 Audio From Matrix +
36 11 Audio From Matrix -
12 12 Audio From Matrix +
37 12 Audio From Matrix -
13 13 Audio From Matrix +
38 13 Audio From Matrix -
14 14 Audio From Matrix +
39 14 Audio From Matrix -
15 15 Audio From Matrix +
40 15 Audio From Matrix -
16 16 Audio From Matrix +
41 16 Audio From Matrix -
17 17 Audio From Matrix +
42 17 Audio From Matrix -
18 18 Audio From Matrix +
43 18 Audio From Matrix -
19 19 Audio From Matrix +
44 19 Audio From Matrix -
20 20 Audio From Matrix +
45 20 Audio From Matrix -
21 21 Audio From Matrix +
46 21 Audio From Matrix -
22 22 Audio From Matrix +
47 22 Audio From Matrix -
23 23 Audio From Matrix +
48 23 Audio From Matrix -
24 24 Audio From Matrix +
49 24 Audio From Matrix -
Telco Backcard - Telco Connector - J27
Pin
Number Port Function
11AudioToMatrix+
26 1 Audio To Matrix -
22AudioToMatrix+
27 2 Audio To Matrix -
33AudioToMatrix+
28 3 Audio To Matrix -
44AudioToMatrix+
Telco Backcard - Telco Connector - J26
Pin
Number Port Function

5
Specifications
29 4 Audio To Matrix -
5 5 Audio To Matrix +
30 5 Audio To Matrix -
6 6 Audio To Matrix +
31 6 Audio To Matrix -
7 7 Audio To Matrix +
32 7 Audio To Matrix -
8 8 Audio To Matrix +
33 8 Audio To Matrix -
9 9 Audio To Matrix +
34 9 Audio To Matrix -
10 10 Audio To Matrix +
35 10 Audio To Matrix -
11 11 Audio To Matrix +
36 11 Audio To Matrix -
12 12 Audio To Matrix +
37 12 Audio To Matrix -
13 13 Audio To Matrix +
38 13 Audio To Matrix -
14 14 Audio To Matrix +
39 14 Audio To Matrix -
15 15 Audio To Matrix +
40 15 Audio To Matrix -
16 16 Audio To Matrix +
41 16 Audio To Matrix -
17 17 Audio To Matrix +
42 17 Audio To Matrix -
18 18 Audio To Matrix +
43 18 Audio To Matrix -
Telco Backcard - Telco Connector - J27
Pin
Number Port Function
19 19 Audio To Matrix +
44 19 Audio To Matrix -
20 20 Audio To Matrix +
45 20 Audio To Matrix -
21 21 Audio To Matrix +
46 21 Audio To Matrix -
22 22 Audio To Matrix +
47 22 Audio To Matrix -
23 23 Audio To Matrix +
48 23 Audio To Matrix -
24 24 Audio To Matrix +
49 24 Audio To Matrix -
Telco Backcard - Telco Connector - J28
Pin
Number Port Function
1-8 1-8 Data +
25-33 1-8 Data -
9-16 9-16 Data +
34-41 9-16 Data -
17-24 17-24 Data +
42-49 17-24 Data -
Telco Backcard - Telco Connector - J27
Pin
Number Port Function

XCP-955 8800303674
6

7
CHAPTER 3
XCP-32-DB9
9000-7810-000
The XCP-32-DB9 is the newly created 32-port DB9
breakout panel with MDR connector for the ADAM with an
AIO-16 card and Cronus. It allows you to expand the
number of DB-9 serial ports. The XCP-32-DB9 is backward
compatible with the AIO-8 card.
Specifications
Dimensions:
19” (482.6mm) W x 3.5” (88.9mm) H x 1” (25.4mm) D
Weight:
1.7 lb. (0.77 kg)
NOTE: When using the 32-port DB-9 breakout panel, you
MUST use the MDR backcard for both the AIO-16 and
Cronus.
J400
J300
J200
J100
TELEX COMMUNICATIONS, INC.
MADE IN U.S.A.
XCP-32-DB9
TM
R
1
3
7
5
8
6
4
21
3
7
5
8
6
4
2
1
3
7
5
8
6
4
2
1
3
7
5
8
6
4
2
The arrows represent the MDR to DB-9 connector responsiblity
9-pin Male D-sub
Pin 1 Keypanel Data +
Pin 2 Keypanel Data -
Pin 3 Gnd
Pin 4 Audio to Matrix +
Pin 5 Audio to Matrix -
Pin 6 Gnd
Pin 7 Audio from Matrix -
Pin 8 Audio from Matrix +
Pin 9 Gnd

XCP-32-DB9 9000-7810-000
8
NOTE: There are 4 MDR connectors on the XCP-32-DB9
Breakout panel.
MDR Connector
Pin
Number Port Function
81Data+
33 1 Data -
24 1 Audio To Matrix +
49 1 Audio To Matrix -
25 1 Audio From Matrix +
50 1 Audio From Matrix -
72Data+
32 2 Data -
22 2 Audio To Matrix +
47 2 Audio To Matrix -
23 2 Audio From Matrix +
48 2 Audio From Matrix -
63Data+
31 3 Data -
20 3 Au dio To Matrix +
45 3 Audio To Matrix -
21 3 Audio From Matrix +
46 3 Audio From Matrix -
54Data+
30 4 Data +
18 4 Audio To Matrix +
43 4 Audio To Matrix -
19 4 Audio From Matrix +
44 4 Audio From Matrix -
45Data+
29 5 Data +
16 5 Audio To Matrix +
41 5 Audio To Matrix -
17 5 Audio From Matrix +
42 5 Audio From Matrix -
36Data+
28 6 Data +
14 6 Audio To Matrix +
39 6 Audio To Matrix -
15 6 Audio From Matrix +
40 6 Audio From Matrix -
27Data+
27 7 Data +
12 7 Audio To Matrix +
37 7 Audio To Matrix -
13 7 Audio From Matrix +
38 7 Audio From Matrix -
18Data+
26 8 Data +
10 8 Audio To Matrix +
35 8 Audio To Matrix -
11 8 Audio From Matrix +
36 8 Audio From Matrix -
MDR Connector Port
J1 1-8
J2 9-16
J3 17-24
J4 25-32
MDR Connector
Pin
Number Port Function

9
CHAPTER 4
XCP-16-DB9-T
9000-7837-000
The XCP-16-DB9-T is the newly created 16-port DB9
breakout panel with MDR connector and an audio
transformer for the Cronus and AIO-16. It allows you to
expand the number of DB-9 serial ports in the Intercom
system.
Specifications
Dimensions:
18.98” (482mm) W x 1.69” (43mm) H x 3.11” (79mm) D
Weight:
2.2 lb. (1.0 kg)
NOTE: When using the 32-port DB-9 breakout panel, you
MUST use the MDR backcard for both the AIO-16 and
Cronus.
.
91007837-000 REV A
91007837-000 REV A
J1 J2
TELEX COMMUNICATIONS, INC.
MADE IN U.S.A.
XCP-16-DB9-T
TM
1234
5678
1234
5678
9-pin Male D-sub
Pin 1 Keypanel Data +
Pin 2 Keypanel Data -
Pin 3 Gnd
Pin 4 Audio to Matrix +
Pin 5 Audio to Matrix -
Pin 6 Gnd
Pin 7 Audio from Matrix -
Pin 8 Audio from Matrix +
Pin 9 Gnd
MDR Connector
Pin
Number Port Function
81 Data+
33 1 Data -
24 1 Audio To Matrix +
49 1 Audio To Matrix -
25 1 Audio From Matrix +

XCP-16-DB9-T 9000-7837-000
10
NOTE: There are 2 MDR connectors on the XCP-32-DB9-T
Breakout panel.
50 1 Audio From Matrix -
72 Data+
32 2 Data -
22 2 Audio To Matrix +
47 2 Audio To Matrix -
23 2 Audio From Matrix +
48 2 Audio From Matrix -
63 Data+
31 3 Data -
20 3 Audio To Matrix +
45 3 Audio To Matrix -
21 3 Audio From Matrix +
46 3 Audio From Matrix -
54 Data+
30 4 Data +
18 4 Audio To Matrix +
43 4 Audio To Matrix -
19 4 Audio From Matrix +
44 4 Audio From Matrix -
45 Data+
29 5 Data +
16 5 Audio To Matrix +
41 5 Audio To Matrix -
17 5 Audio From Matrix +
42 5 Audio From Matrix -
36 Data+
28 6 Data +
14 6 Audio To Matrix +
39 6 Audio To Matrix -
15 6 Audio From Matrix +
40 6 Audio From Matrix -
27 Data+
27 7 Data +
12 7 Audio To Matrix +
37 7 Audio To Matrix -
13 7 Audio From Matrix +
38 7 Audio From Matrix -
MDR Connector
Pin
Number Port Function
18 Data+
26 8 Data +
10 8 Audio To Matrix +
35 8 Audio To Matrix -
11 8 Audio From Matrix +
36 8 Audio From Matrix -
MDR Connector Port
J1 1-8
J2 9-16
MDR Connector
Pin
Number Port Function

11
CHAPTER 5
XCP-48-RJ45
9000-7809-000
The XCP-48-RJ45 is the newly created 48-port RJ-45
breakout panel with MDR connector for the AIO-16 and
Cronus. It allow you to expand the number of RJ-45 ports on
the Intercom system.
Specifications
Dimensions:
18.98” (482mm) W x 1.69” (43mm) H x 2.95” (75mm) D
Weight:
3.5 lb. (1.59 kg)
NOTE: When using the 48-port RJ-45 breakout panel, you
MUST use the MDR backcard for both the AIO-16 and
Cronus.
J6
J5
J4
J3
J2
J1
TELEX COMMUNICATIONS, INC.
MADE IN U.S.A.
XCP-48-RJ45
14
5678
23 14
5678
23 14
5678
23 14
5678
23 14
5678
23 14
5678
23
The arrows represent the MDR to RJ-45 connection responsibility
RJ-45
Pin 1 N/A
Pin 2 Keypanel Data -
Pin 3 Audio Out +
Pin 4 Audio In +
Pin 5 Audio In -
Pin 6 Audio Out -
Pin 7 Keypanel Data +
Pin 8 N/A
MDR Connector
Pin
Number Port Function
81Data+
33 1 Data -
24 1 Audio To Matrix +

XCP-48-RJ45 9000-7809-000
12
NOTE: There are 6 MDR connectors on the XCP-48 RJ-45
Breakout panel.
49 1 Audio To Matrix -
25 1 Audio From Matrix +
50 1 Audio From Matrix -
72Data+
32 2 Data -
22 2 Audio To Matrix +
47 2 Audio To Matrix -
23 2 Audio From Matrix +
48 2 Audio From Matrix -
63Data+
31 3 Data -
20 3 Audio To Matrix +
45 3 Audio To Matrix -
21 3 Audio From Matrix +
46 3 Audio From Matrix -
54Data+
30 4 Data +
18 4 Audio To Matrix +
43 4 Audio To Matrix -
19 4 Audio From Matrix +
44 4 Audio From Matrix -
45Data+
29 5 Data +
16 5 Audio To Matrix +
41 5 Audio To Matrix -
17 5 Audio From Matrix +
42 5 Audio From Matrix -
36Data+
28 6 Data +
14 6 Audio To Matrix +
39 6 Audio To Matrix -
15 6 Audio From Matrix +
40 6 Audio From Matrix -
27Data+
27 7 Data +
12 7 Audio To Matrix +
37 7 Audio To Matrix -
MDR Connector
Pin
Number Port Function
13 7 Audio From Matrix +
38 7 Audio From Matrix -
18Data+
26 8 Data +
10 8 Audio To Matrix +
35 8 Audio To Matrix -
11 8 Audio From Matrix +
36 8 Audio From Matrix -
MDR Connector Port
J1 1-8
J2 9-16
J3 17-24
J4 25-32
J5 33-40
J6 41-48
MDR Connector
Pin
Number Port Function

13
CHAPTER 6
XCP-48-Telco
9000-7822-000
The XCP-48-Telco is the newly created breakout panel with
MDR connector for the AIO-16 and Cronus. It combines the
audio to matrix, audio from matrix, and data pairs. It then
routes them on individual Telco connectors. It allows you to
connect to 48 ports on the Intercom system.
Specifications
Dimensions:
18.98” (482mm) W x 3.39” (86mm) H x 2.95” (75mm) D
Weight:
2 lb. (.907 kg)
NOTE: When using the 48-port Telco breakout panel, you
MUST use the MDR backcard for both the AIO-16 and
Cronus.
J1 J2
J3
J4 J5
J6
J100 J200 J300 J400 J500 J600
Telco Connector (J1 - J6) MDR Connector (J100 - J600)
TM
XCP48-TELCO
MDR Connector
Pin
Number Port Function
81Data+
33 1 Data -
24 1 Audio To Matrix +
49 1 Audio To Matrix -
25 1 Audio From Matrix +
50 1 Audio From Matrix -
72Data+
32 2 Data -
22 2 Audio To Matrix +
47 2 Audio To Matrix -
23 2 Audio From Matrix +
48 2 Audio From Matrix -

XCP-48-Telco 9000-7822-000
14
NOTE: There are 6 MDR connectors on the XCP-48-
TELCO Breakout Panel.
63Data+
31 3 Data -
20 3 Audio To Matrix +
45 3 Audio To Matrix -
21 3 Audio From Matrix +
46 3 Audio From Matrix -
54Data+
30 4 Data +
18 4 Audio To Matrix +
43 4 Audio To Matrix -
19 4 Audio From Matrix +
44 4 Audio From Matrix -
45Data+
29 5 Data +
16 5 Audio To Matrix +
41 5 Audio To Matrix -
17 5 Audio From Matrix +
42 5 Audio From Matrix -
36Data+
28 6 Data +
14 6 Audio To Matrix +
39 6 Audio To Matrix -
15 6 Audio From Matrix +
40 6 Audio From Matrix -
27Data+
27 7 Data +
12 7 Audio To Matrix +
37 7 Audio To Matrix -
13 7 Audio From Matrix +
38 7 Audio From Matrix -
18Data+
26 8 Data +
10 8 Audio To Matrix +
35 8 Audio To Matrix -
11 8 Audio From Matrix +
36 8 Audio From Matrix -
MDR Connector
Pin
Number Port Function MDR Connector Port
J100 1-8
J200 9-16
J300 17-24
J400 25-32
J500 33-40
J600 41-48
Telco Connector - J1, J4
Pin
Number Port Function
1 1 Audio to Matrix +
26 1 Audio to Matrix -
2 2 Audio to Matrix +
27 2 Audio to Matrix -
3 3 Audio to Matrix +
28 3 Audio to Matrix -
4 4 Audio to Matrix +
29 4 Audio to Matrix -
5 5 Audio to Matrix +
30 5 Audio to Matrix -
6 6 Audio to Matrix +
31 6 Audio to Matrix -
7 7 Audio to Matrix +
32 7 Audio to Matrix -
8 8 Audio to Matrix +
33 8 Audio to Matrix -
9 9 Audio to Matrix +
34 9 Audio to Matrix -
10 10 Audio to Matrix +
35 10 Audio to Matrix -
11 11 Audio to Matrix +
36 11 Audio to Matrix -

XCP-48-Telco 9000-7822-000
15
12 12 Audio to Matrix +
37 12 Audio to Matrix -
13 13 Audio to Matrix +
38 13 Audio to Matrix -
14 14 Audio to Matrix +
39 14 Audio to Matrix -
15 15 Audio to Matrix +
40 15 Audio to Matrix -
16 16 Audio to Matrix +
41 16 Audio to Matrix -
17 17 Audio to Matrix +
42 17 Audio to Matrix -
18 18 Audio to Matrix +
43 18 Audio to Matrix -
19 19 Audio to Matrix +
44 19 Audio to Matrix -
20 20 Audio to Matrix +
45 20 Audio to Matrix -
21 21 Audio to Matrix +
46 21 Audio to Matrix -
22 22 Audio to Matrix +
47 22 Audio to Matrix -
23 23 Audio to Matrix +
48 23 Audio to Matrix -
24 24 Audio to Matrix +
49 24 Audio to Matrix -
Telco Connector - J1, J4
Pin
Number Port Function
Telco Connector - J2, J5
Pin
Number Port Function
1 1 Audio from Matrix +
26 1 Audio from Matrix -
2 2 Audio from Matrix +
27 2 Audio from Matrix -
3 3 Audio from Matrix +
28 3 Audio from Matrix -
4 4 Audio from Matrix +
29 4 Audio from Matrix -
5 5 Audio from Matrix +
30 5 Audio from Matrix -
6 6 Audio from Matrix +
31 6 Audio from Matrix -
7 7 Audio from Matrix +
32 7 Audio from Matrix -
8 8 Audio from Matrix +
33 8 Audio from Matrix -
9 9 Audio from Matrix +
34 9 Audio from Matrix -
10 10 Audio from Matrix +
35 10 Audio from Matrix -
11 11 Audio from Matrix +
36 11 Audio from Matrix -
12 12 Audio from Matrix +
37 12 Audio from Matrix -
13 13 Audio from Matrix +
38 13 Audio from Matrix -
14 14 Audio from Matrix +
39 14 Audio from Matrix -
15 15 Audio from Matrix +

XCP-48-Telco 9000-7822-000
16
40 15 Audio from Matrix -
16 16 Audio from Matrix +
41 16 Audio from Matrix -
17 17 Audio from Matrix +
42 17 Audio from Matrix -
18 18 Audio from Matrix +
43 18 Audio from Matrix -
19 19 Audio from Matrix +
44 19 Audio from Matrix -
20 20 Audio from Matrix +
45 20 Audio from Matrix -
21 21 Audio from Matrix +
46 21 Audio from Matrix -
22 22 Audio from Matrix +
47 22 Audio from Matrix -
23 23 Audio from Matrix +
48 23 Audio from Matrix -
24 24 Audio from Matrix +
49 24 Audio from Matrix -
Telco Connector - J3, J6
Pin
Number Port Function
11Data+
26 1 Data -
22Data+
27 2 Data -
33Data+
28 3 Data -
44Data+
29 4 Data -
Telco Connector - J2, J5
Pin
Number Port Function
55Data+
30 5 Data -
66Data+
31 6 Data -
77Data+
32 7 Data -
88Data+
33 8 Data -
99Data+
34 9 Data -
10 10 Data +
35 10 Datax -
11 11 Data +
36 11 Data -
12 12 Data +
37 12 Data -
13 13 Data +
38 13 Data -
14 14 Data +
39 14 Data -
15 15 Data +
40 15 Data -
16 16 Data +
41 16 Data -
17 17 Data +
42 17 Data -
18 18 Data +
43 18 Data -
Telco Connector - J3, J6
Pin
Number Port Function