Rubinet 8EFML User manual

8EFML
8EFMC
2 1/8"
53
5 5/16"
135
1/2" NPT
11"
279
6 3/16"
158
2"
51
4"
101
377
14 13/16"
TYPICAL
16" TO STOVE TOP
2 1/8"
53
5 5/16"
135
1/2" NPT
11"
279
6 3/16"
158
6 3/16"
157
2"
51
4"
101
TYPICAL
16" TO STOVE TO
P
CONTACT US:
If you need assistance with installation, replacement parts or have any questions regarding your Rubinet product,
please call a Customer Service representative at: 905-851-6781 toll free 1-800-461-5901 or visit www.rubinet.com
FEATURES:
- Brass construction with choice of 21 nishes
- Maximum reach 17 3/16”
- Two Handles
- Adjustable quarter turn ceramic disc cartridges
- 1.5 gpm @ 60 psi (Helps meet CalGreen regulation)
APPROVAL:
- AB1953 / NSF61
- ASME A 112.18.1
- CSA B125.1
WALL MOUNT POT FILLER
ASSEMBLY INSTRUCTION 8EFML or C
REMOVAL OF FAUCET:
Always turn the water supply off before removing the existing faucet or disassembling a valve. Open both faucet handles to relieve water pressure
and to ensure that the water has been successfully turned off.
CARE OF FAUCET:
The use of warm water and a soft cloth is all that is required to clean Rubinet products. The patina of our living nishes (Oil Rubbed Bronze &
Tuscan Brass) will change as a result of normal use. Applying Mineral Oil on occasion will create a softer look, subtle color changes and character.
180215

3
1
HANDLE ALIGNMENT
Loosen the lock nut from the main body
while holding the broach position with handle
LOCK NUT
BROACH
HANDLE
ON Replace handle one tooth o from
the ON position as shown.
Turn the handle to reach the
desired handle alignment.
Then tighten the lock nut to secure.
This adjustment should not
be more than 25º.
2
ON
5
WALL MOUNT POT FILLER 8EFML or CWALLMOUNT POT FILLER 8EFML or C

Spacer
Tighten set screw to secure
ANCHOR PLUGS
STUD WALL BACK CONCRETE WALL BACK
MINIMUM 1 1/8˝
MAXIMUM 1 1/4˝ 2 3/4˝
1/2˝
NPT
(not supplied)
1 3/8˝
FINISHED WALL
Ø 7/16˝ Hole Size
for Concrete
Ø 1 1/4˝ Ø 1/8˝ Hole Size
for Stud Back
Hole Size
• Anchor using ears
on the valve body.
• Anchor using ears
on the valve body.
4 1
WALL MOUNT POT FILLER 8EFML or CWALL MOUNT POT FILLER 8EFML or C

Tighten set screw to secure
Remove plug and discard
Tighten set screw to secure
Plug
2 3
WALL MOUNT POT FILLER 8EFML or CWALL MOUNT POT FILLER 8EFML or C

Tighten set screw to secure
Remove plug and discard
Tighten set screw to secure
Plug
2 3
WALL MOUNT POT FILLER 8EFML or CWALL MOUNT POT FILLER 8EFML or C

Spacer
Tighten set screw to secure
ANCHOR PLUGS
STUD WALL BACK CONCRETE WALL BACK
MINIMUM 1 1/8˝
MAXIMUM 1 1/4˝ 2 3/4˝
1/2˝
NPT
(not supplied)
1 3/8˝
FINISHED WALL
Ø 7/16˝ Hole Size
for Concrete
Ø 1 1/4˝ Ø 1/8˝ Hole Size
for Stud Back
Hole Size
• Anchor using ears
on the valve body.
• Anchor using ears
on the valve body.
4 1
WALL MOUNT POT FILLER 8EFML or CWALL MOUNT POT FILLER 8EFML or C

3
1
HANDLE ALIGNMENT
Loosen the lock nut from the main body
while holding the broach position with handle
LOCK NUT
BROACH
HANDLE
ON Replace handle one tooth o from
the ON position as shown.
Turn the handle to reach the
desired handle alignment.
Then tighten the lock nut to secure.
This adjustment should not
be more than 25º.
2
ON
5
WALL MOUNT POT FILLER 8EFML or CWALLMOUNT POT FILLER 8EFML or C

8EFML
8EFMC
2 1/8"
53
5 5/16"
135
1/2" NPT
11"
279
6 3/16"
158
2"
51
4"
101
377
14 13/16"
TYPICAL
16" TO STOVE TOP
2 1/8"
53
5 5/16"
135
1/2" NPT
11"
279
6 3/16"
158
6 3/16"
157
2"
51
4"
101
TYPICAL
16" TO STOVE TO
P
CONTACT US:
If you need assistance with installation, replacement parts or have any questions regarding your Rubinet product,
please call a Customer Service representative at: 905-851-6781 toll free 1-800-461-5901 or visit www.rubinet.com
FEATURES:
- Brass construction with choice of 21 nishes
- Maximum reach 17 3/16”
- Two Handles
- Adjustable quarter turn ceramic disc cartridges
- 1.5 gpm @ 60 psi (Helps meet CalGreen regulation)
APPROVAL:
- AB1953 / NSF61
- ASME A 112.18.1
- CSA B125.1
WALL MOUNT POT FILLER
ASSEMBLY INSTRUCTION 8EFML or C
REMOVAL OF FAUCET:
Always turn the water supply off before removing the existing faucet or disassembling a valve. Open both faucet handles to relieve water pressure
and to ensure that the water has been successfully turned off.
CARE OF FAUCET:
The use of warm water and a soft cloth is all that is required to clean Rubinet products. The patina of our living nishes (Oil Rubbed Bronze &
Tuscan Brass) will change as a result of normal use. Applying Mineral Oil on occasion will create a softer look, subtle color changes and character.
180215