RUDO X Series User manual

USER MANUAL
SERIES
1 2 3
4 5 6
7 8 9
*0 #
R
U
D
O


Disclaimer
We have done our best to ensure that the information provided in this manual is correct
and reliable, but we cannot fully guarantee errors before and during printing. Some-
times we in order to improve the performance, reliability and safety of components and
systems, may upgrade the product, which may be somewhat inconsistent with the
contents of the manual, but does not affect the actual operation, if there is a change is
not known, please understand! Our company will update the content regularly. If you
have any questions, please call our company to answer. The final interpretation of the
entire contents of this manual is the right of the Company. The functions described in
this statement are not used as a reason for the use of this product for special purposes
and the Company shall not be liable for accidents and hazards caused by the custom-
er's improper operation.
Smart door lock as a high-tech product, the installation of good or bad directly affect
the normal operation and service life of the door lock, it is recommended that you
install the door lock after the room has been decorated, please choose to ensure the
quality of personnel to install. Installation must be in strictly according to the compa-
ny's installation standards for operation.
Do not use in environments with strong radiation, high magnetic field, and high
temperature with corrosive substances, so as to not affect the performance and life of
the smart lock.
Please initialize the door lock as soon as the door lock installation is completed and
restore the lock to the initial state. And please set your authorized unlock methods
immediately after initialization to prevent others from illegally opening your door lock.
Please use good quality 4-pcs AAA 1.5V alkaline battery, mix using of New Old
Battery OR using Non- destructive battery will destroy your door lock.
In order to feel the convenience and advanced of the company's products, please
carefully read this manual before use, if there are any doubts, can directly to the
company's customer service center. the company had professional technical personnel
to help you.
Batteries not included in the box.
Safety and Precautions

Initialization State
a) Unlock Information refers to the input fingerprint, passcode or IC card information
(including administrators and normal users).
1. Key "*": Clear key/return key.
b) Key "#": Confirmation key or menu function key.
Original State
The factory administrator initial passcode is "123456#", under the initial state any
fingerprint, IC card or passcode can open the lock.
Functions and Operations
Initialization State
Press ‘*’ then press ‘#’
Voice broadcast:
Please enter administrator
information (enter 123456#)
After successful verification, Voice broadcasts:
Press 1 for Administrator Settings;
Press 2 for user settings
Press 3 for system Settings
Press 4 for restore Settings
Operations Instructions
Press “*” + “#”
to enter System
Menu
Press “1” for
Admin Settings
Press “*” to exit
Press “2” to delete
Press “1” to add Input Fingerprint - 4 times,
6-8 digits Passcode - 2 times
IC Card – one time
Input Fingerprint - 4 times,
6-8 digits Passcode - 2 times
IC Card – one time
Press “*” to exit
Press “2” to delete
Press “1” to add
Press “2” for
User Settings
Press “1” for voice Settings
Press “1” to Turn ON
Press “2” Turn OFF
Press “*” to return
Press “2” for unlock mode
settinng
Press “1” for Single unlock
Press “2” for combine unlock
Press “*” to return
Press “3” for language
Settings
Press “1” for Chinese
Press “2” for English
Press “*” to return
Press “4” for time Settings Input time in YYMMDDHHMM
format, Press # to confirm
Press “3” for
System Settings
Press the reset key under the battery cover on the rear panel of the
lock for around 6-8 seconds and beep tone, restored successfully.
Press “4” for
Factory Settings

The system will automatically locked for 90 seconds if the unauthorized unlocking
information is input for more than 5 times within 5 minutes.
After the voltage is lower than 4.5v, the lock will automatically alarm every time when
it is unlocked. After the first alarm, the lock can be opened for 200 times. New batter-
ies must be replaced immediately.
Passcode peeping prevention function: Input passcode as follows when opening the
door with passcode: XXX passcode XXX; you can add some extra codes before and
after the passcode then # to confirm. The passcode must be included within the input.
Factory Reset setting: Press the restore key under the battery cover on the rear panel
of the lock around 6-8 seconds, all the inlock information and records will delete after
factory reset.
Normal open mode (Lock will not be automatically locked), Press 5# after Unlocking
with Administrator, voice prompt Normal open mode Successful.
Normal open mode under open status, Unlocking with Administrator with close the
Normal Open mode.
Anti-lock function: after pressing back lock key, the voice says, “The door is locked".
Now, ordinary users can't open it, and only administrators can unlock.
Important Notes to Consider
THANK YOU
for purchasing Rudo smart lock. We are so happy to welcome you into our Family!
Your Rudo smart lock is covered by our 100% satisfaction guarantee. Please call us at
[phone] or email us at [e-mail] for installation or any other
support required.
Your Rudo smart lock is covered by our 1-year warranty. Visit us at www.rudo-
locks.com for our Warranty, Privacy, End User License Agreement, and other Policies.
We, at RUDO, shall continue to offer you a world-class product and an unparalleled
professional service.
TEAM RUDO