Rugged CCTV Night Ranger User manual

NIGHT RANGER
Long Range Infrared High Speed Dome PTZ Camera

TABLE OF CONTENT
1. Notice--------------------------------------------------------------------------------------------------------1
3. ------------------------------------------------------------------------5Function and operation instruction
4. ------------------------------------------------------------------------------------------------8System setting
2. Performance-----------------------------------------------------------------------------------------2
3.2 ----------- ---------- ----Auto-run motion ---------------------- ---------- -------------------------------5
3.4 ------------------- -------Monitor function ------------------------------------ -----------------------------------6
4.1 ------------------ ------Basic operation -------------------------- -----------------------------------------8
4.2 ----------- ------- -- -------------------------------------9Edit dome label ------------------------- - --------------
4.3 ------------ ---------------------------------10Display initial information -------------------------------
4.4 --------------- - -----------------------------11Display setting ------------------------- -------------------
4.5 ------------ --- ----------------------------System setting ------------------------- ----------- -----------12
4.6 ---------------- - --------------- 15Clear ------------------ ------- -----------------------------------------
2.1 PTZ t ------------ - 2echnology parameter -------- -------------- ------------------------------------------
2.2 Camera parameter----------- --- 2----------------------------------------- - -----------------------------
2.3 Performance ----------- ----- 3 & Feature -------------------------------------- --------------------------------
3.1 --------------- --- --------Set camera ID --------------------- ------------ ------------------------------5
3.3 ------------- - --Camera control ------------------------- -- ----------------------------------------------------------6
4.1.1 ------- --- -- ----Self-testing ------------------ ------- -- ---------------------------------------------8
4.1.2 ------------ - --------------------------------8Call the main menu ------------------------- --------
4.1.3 -----The operational ways of keyboard and menu --------------------------------------------8
4.5.1 ------------ ----------- 12Auto flip ------------------------- -------------- ---------------------------
4.5.2 Speed proportion pan------------- 12---------------------------------------------------------------
4.5.3 Park action---- ------ ---------------------- ----------------------------13--------- ------- ------------
4.5.4 Power up action-------------- ---- 13------------------------- -------------------------------------
4.5.5 Fan startup by temperature-------------- ---- 13------------------------- ------------------------
4.5.6 Advance setting--------------------------------------------------------------------------------14
4.7 Password setup ---------------- - --------------- 16 ------------------ ------- ------------------------------
4.8 Clock setting ---------------- - --------------- 17 ------------------ ------- --------------------------------
5. Camera setting-------------- ----------- 19--------- --------------------------------------------------------
5.1 Zoom speed------------------- 19-----------------------------------------------------------------------
5.2 ------------- 0Digital zoom control --------------------------------------------------------------------2
5.3 --------------Back light compensation -------------------------------------------------------------21
5.4 Slow s -------------------hutter -----------------------------------------------------------------------22
5.7 IR cut filter-----------------------------------------------------------------------------------------24
5.5 Line Sync control----------- ---- - ---------------------------23------------------ ------- ---------------
5.8 Advance ---------------- setting --------------------------------------------------------------------25
5.8.1 ------------------AE mode -------------------------------------------------------------------25
5.6 WDR control----------- ---- - ---------------------------------23------------------ ------- ---------------
4.9 Dome address ---------------- - --------------- 18 ------------------ ------- --------------------------------

7. ------------------------------------------------------------------------------------34Privacy zone masking
8. --------------------------------------------------------------------------------------------35Alarm function
9. ----------------------------------------------------------------------------------------------------37Appendix
9.5.1 Baud rate setting------------------------------------------------------------------------42
9.5.3 ID setting----------------------------------------------------------------------------------42
9.5.2 Protocol setting------------------------------------------------------------------------------42
9.1 Menu index-----------------------------------------------------------------------------------------37
6. ------------------------------------------------------------------------------------------27Function setting
6.1 ------------- ------- --- 27Preset --------------- ------- -----------------------------------------------------
6.2 -------------- ------- 28Scan --------------------------------- ----------------------------------------------
6.3 ---------------- --------- 29Pattern --------------------------- ---------------------------------------------
6.4 Tour------------ -- ----------------------------------- ------- ------------------------------------------30
6.5 ---------------- ---Zone ---------------------------- ----------------------------------------------------31
9.5 DIP switch setup---------------------------------------------------------------------------------------42
6.6 Time running---------------- ------------------------------- ------------------------------------------32
5.8.2 ---------- -----White balance mode ---------------- ---------------------------------------26
10.Installation instruction--------------------------------------------------------------------------------------47
11.Maintance service terms-------------------------------------------------------------------------------------53
10.1 Caution--------------------------------------------------------------------------------------------------47
10.3 Lightning Proof and Surge Proof----------------------------------------------------------------------48
10.5 The preparation of installation------------------------------------------------------------------------48
10.6 Structure introduction----------------------------------------------------------------------------------49
10.7 Basic size graph-----------------------------------------------------------------------------------------49
10. 9 Cabling connection-------------------------------------------------------------------------------------52
10.10 Electrification inspection-----------------------------------------------------------------------------52
9.4 Rs485 Bus Basic Knowledge----------------------------------------------------------------------40
9.2 -------------------------3824VAC Wire Diameter and Transmission Distance Comparison chart
9.3 -------------------------------------------39Domestic and Abroad Wire Gauge Conversion Chart
10.2 Distributing the Line in Security----------------------------------------------------------------------47
10.4 Water Proof----------------------------------------------------------------------------------------------48
10.8 Installation ---------------------------------------------------------------------------------------------50

1
Precaution
Electrical safety
Conform to country and local electrical safety standard when using or installing the product.
Transportation
The PTZ should be protected against extremes of pressure, vibration and humidity during storage
installation and transportation. The infrared
Installation of care
Infrared
Infrared
Requirements to service personnel
All the service work should be done by qualified technicians.
Do not disassemble the pan/tilt module
Do not disassemble screws, and don't maintain the parts in the Pan/Tilt by yourself. Only qualified
and authorized personnel can undertake repairs.
Environmental requirements
Don't place the camera to be shoot by strong light objects
Don't place the camera to be shoot by strong light objects. Don't point the PTZ to the sun or other
bright objects when in use or not. It may affect image quality.
PTZ camera is transported by integrated packing.
Please refer to user installation manual when installation. Please pick up the parts gently
and do not press it, or else, which will cause the malfunction of parts; the lens of belong to
optional products, please do not touch it by your hand to avoid scraping it.
1. Precaution
Function of waterproof
Our product has good water-proof, humidity-proof and dust-proof, which pass the standard of IP67.
But it's not good to stay in the humidity environment, which will make some machinery parts broken.
=
O
：-40~+60 C
：<90%
：86~106Kpa
：24V/2500MA，50/60HZ
Requirements for PTZ:
Environmental temp
Humidity
Air pressure
AC Power supply

Baud rate（RS485）
Consumption
Environmental humidity
Protection grade
Mount
Operational environment
Performance
Electrical：
Decoder
Built-in
Alarm function
7 alarm input/2 alarm output
Power supply AC24V
Rotation speed Pan0.4～180°/S Tilt0.4～80°/S
2. 1 Technology parameter
Operation:
Pan rotation
360°continuously
Preset、Tour、Scan、Pattern
Environmental:
-40 60℃
~ +
Physical:
Setting:
2400/4800/9600/19200bps
Protocol Sixteen protocols, including
Kalatel, Phlips, Diamond, etc.
Pelco,
Address setting 0-254
Preset 128presets
Tilt rotation Tilt 105°(180° auto flip) 0—95% no compensation
2. 2 Camera parameter
IP67,Weather proof housing,
4000Vlightning proof surge proof
wall mount pendant mount
Surveillance
2
（PTZ+IR light）33w
Infrared night vision Above 120 meters
Spec
Signal system
Imaging element
Scanning system
Effective pixel (H×V)
Scanning frequency
Resolution
Minimum illumination
Zoom
Focus
Angle Field of view
IRIS Control
Focusing system
White balance
Back -light compensation
S/N ratio
Electronic shutter speed
Video output
Video output port
Wide Dynamic Range
Privacy zone masking
CPS:18X
IR Cut Filter
DPS:26X
IR Cut Filter
FPS:36X
IR Cut Filter
GPH:23X
IR Cut Filter
MPH:30X
IR Cut Filter
LPH:35X
IR Cut Filter
NTSC / PAL
1/4＂ Sony Exview HAD CCD 1/4＂ Sony Exview HAD CCD
2：1 Interlace
NTSC：758×504 / PAL： 752×582
H:15.625 KHz / V:50.00 Hz
530TV Lines 520TV Lines
0.7Lux 2.0Lux 1.4Lux 0.5 Lux
18×optical，12×digital 26
12×digital
×optical 36
12×digital
×optical 23
12×digital
×optical 30
12×digital
×optical 35
12×digital
×optical
4.1mm-73.8mm 3.5mm-91mm 3.4mm-122.4mm 3.6mm-82.8mm 3.4mm-102mm 3.4mm-119mm
48.0°(Wide) to 2.8°(Tele)
54.2°2.2(Wide) to °(Tele)
57.8°1.7(Wide) to °(Tele)
54.0°2.5(Wide) to °(Tele) 55.8°2.0(Wide) to °(Tele) 55.8°1.7(Wide) to °(Tele)
Auto/Manual
Auto/Manual
Auto/Manual（R/B gain adjustable）
Off/Auto
More than 50dB
1/1 to 1/10,000s, 22 steps NTSC：1/2 ～ 1/30,000s ， PAL：1/1.5 ～ 1/30,000s
1/2~1/30,000秒
1.0±0.2Vp-p
Female BNC
NO OFF/ON
24 8
8
Model
540 TV Lines
0.05 Lux
APS：18×
Color
1/4″Sony Super
HAD CCD
480TV Lines
1.0 Lux
1/50 to 1/10,000s,16 steps
NTSC：470TV Lines
PAL： 460 TV Lines
（PTZ+IR light+Heater）53w

3
Performance
2.3
Ø Built-in receiver
● All configurable options stored in main control board to protect against power cuts
● Integrate design and high durability ● 128 presets can be randomly stored
● 01-80preset support auto-tour, and each tour can store up to 24 presets.
● 4 pattern tours ● 4 scan
● Built-in direction indicator ● Built-in temperature indicator
● Built-in clock setting function
● Rs485 Bus communication or American Dynamics Manchester code
● Support 24 masking zones at most（This function is decide by the parameter of built-in camera, if the camera
has not this function, this option is invalid. )
● 7 alarm input, 2 alarm output.
Ø
●Aluminum alloy material and anti-violence design surface is well hidden and rapid heat removal; Level
of protection achieves IP67.
● Precise stepping motor drives the pan to run smoothly and react sensitivity.
● Integrated design, compact structure, easy to disassmeble.
● Exquisite mechanical drive, support to rotate pan 360°continuously and tilt 0°°, and may
rotate 180°with auto flip.
● Pan 0.4°/s to rotate slowly, and the image doesn't vibrate.
Ø Built-in digital camera
● High sensitivity, high resolution, and integrated digital processing
● Auto-focus ● Auto-Iris
● Auto brightness control ● Auto white balance
● IR cut filter ● Auto back light compensation
● Auto slow shutter
Ø OSD menu
● All English menu can be selected.
● Visual OSD menu. Revising the PTZ's information and parameter by keyboard and OSD menu,
and it is easy to operate.
● Set park action function and set presets, or run scan, pattern, tour, etc during idle time.
● Auto-resume movement or carry out pointed movements after power up.
PTZ Performance and Feature
The intelligent Pan/tilt was complete new design, compact structure, built-in constant temperature
device and rapidly heat dissipation from chip; wiper function can retain full resolution picture in raining
day; AMP socket is convenient for installation; Infrared LED range more than 120 meters; Camera rotate
flexibly with low noise, wide range capture and certain auto-functions can provide perfect quality of image
for customer.
Pan Tilt Feature
~ +105

Ø Internal temperature test
● Set time display
● When the temperature exceeds the limit, the screen will display alarm information.
● When the temperature is under the limit, the PTZ will delay to startup, and when the heat device
is heated and got higher than low limit temperature to startup.
● According to the temperature, the fan measures if it is to start or not, and prolong the life of fan.
Night View Function
Infrared LED range more than 100 meters, can manual control or auto-control infrared LED ON/OFF,
manual control through keyboard can turn infrared LED ON/OFF. If auto-control working, image color
will be switch to black and white when in low brightness, black and white will be switch to color when in
high brightness.
Ø
“”
Ø
Ø Wiper function
Wiper function can be set ON/OFF by calling 63 preset or OSD menu. In the raining day, the
wiper can not only ensure the high quality image, but also cleanup the dirtiness on the surface of
lens.
Time running
By the menu Time running ,user may set time running function everyday, and set different four
actions in four different time in one day, including preset, scan, pattern and tour.
Performance
4

Function Instruction
This passage mainly describes the main function and general principle of intelligence PTZ, and not
refer to the concrete operation methods. Different system platform has different operation methods, generally,
should according to the system manufactory's operation manual. Please contact dealer to get necessary
information, there are some particular requirements and operations under specific condition.
Camera ID
SW1 is for setting the address
of the PTZ and SW2 is for setting communication baudrate and controlling protocol. (For detail setting,
please refer to 10.5 DIP switch setting)
Besides the factory protocol(FACTORY), the PTZ is compatible with various popular protocols, such as
PECLO-D, PECLO-P, ERNITEC, VCL, MOLYNX, VICON, SANTACHI, PANASONIC, SAMUNG,
DIAMOND, KALATEL, LILIN, PHILIPS, VIDO B02 AD and so on.
Any controlling command must base on the objective camera address, and the camera only answer to the
controlling command address which coincide with itself. There are three kinds of camera address:
Use camera's switch number to set address 1-8 bits, the address range is 1-254.
Debug address: (Only factory protocol and PELCO can be set) if camera ID is set 0, user may select
any address to control the PTZ.
Auto-run motion
When manually adjusting, for far focus situation, the PTZ responds at a high-speed so that touching
rocker slightly may make picture move rapidly, thus cause the picture to lose. To base on humanized design,
the PTZ automatically adjust pan and tilt rotation according to zoom near and far, which make it is
convenient to operate manually to make tracking for the object. In the menu, you may change system
parameter setting proportion pan as ON to run this function.
Auto flip
If user holds the joystick in the down position, the camera rotates pan 180 degrees, he camera
rotates tilts up to 210 degrees . In the menu, you may set the system parameter setting AUTO FLIP as ON
to run this function.
By the menu park time and park action , user may set auto-call preset or run tour, pattern, and
scan, etc after pointing a few minutes if the PTZ doesn't run any motions.
Power up action
By the menu power up action , after the PTZ powers up or restarts, user may set auto- resume
movements before power up and auto- call preset or run tour, pattern, and scan etc .
3.1
There are two 8digits code switch SW1 and SW2 under the right side cover,
，
● Common address:
●
3.2
Ø Focus/speed proportion pan
Ø
Ø Park action
“”“”
Ø
“”
then t
3. Function Instruction
5

Function Instruction
3. 3 Camera control
Ø Magnification control
The user can control“Wide/Tele” to adjust zoom far and near of the image by keyboard controller to obtain
panoramic image or close view that you need. The PTZ support digital zoom and optical zoom.
Ø Focus control
System defaults Auto focus. When the lens changes, camera will auto-adjust focus according to the center of
the image to get legible image; user can also manually focus to get desire image by operating keyboard
“FAR/NEAR”. When operating keyboard joystick, camera resumes to auto focus.
The camera cannot auto focus in the following status:
●Target is not the center of the image
●Observation the target near and far at the same time, can not be clear at the same time.
●Target is a strong light object, such as neon light, spotlight , etc.
●Target moves too fast
●Target area such as wall
●Target is too dark or vague
●Target image is too small
Ø Iris control
System defaults Auto Iris. Camera can rapidly adjust size of Iris, through the automatically induct the changing
of environment ray, and thus make the brightness of deferent image stable.
User may adjust Iris by controller keyboard “open/close” to get required brightness that you need. User also
can resume auto Iris by joystick operation. When controlling the Iris manually, the PTZ locks current position you
manually controlled; when operating joystick, the PTZ resume auto Iris.
Ø Auto back light compensation
Camera sub-area can carry out auto back light compensation. Under a strong light background, camera will auto
compensate light for the darker object and adjust daylight to the bright background. In order to avoid making the
image lack fidelity by the back line is too bright, and the object is unable to recognize because of darkness, thus gain
legible image.
Ø Auto white balance
Camera can automatically adjust white balance in accordance with the alteration of background lightness
to reach a true colour.
3. 4 Monitor function
Ø Set and call preset
Preset function is that PTZ stores current pan/tilt angle, zoom and other position parameters into the memory.
When necessary PTZ recalls these parameters and adjust camera to that position. User can store and recall presets
easily and promptly by using keyboard controlling. The PTZ can store up to 128 presets.
Ø Tour
Auto tour is the built-in function in the PTZ, to make preset arranged in needful order in tour queue
by programming in advance. To make camera tour between presets by inserting presets in cruise tour. It is feasible
to program tour order, each time as you run tour, you can set the park time of preset. A tour can store 24 presets.
6

Ø
Ø
Ø
Ø
Ø
~ +105
Scan
The operator can prompt set right limit and left limit in advance by keyboard and menu, so as to make the
camera repeatedly scanned between right and left limit at setting speed.
Pattern
Pattern is built-in function in camera; the PTZ can record tracks that are no less than 180s, when running
pattern, the PTZ moves repeatedly according to the recorded tracks. A PTZ can set up to 4 pattern tours.
Alarm input/output controlling function
The PTZ receive an external alarm message, to implement the action that you preset, till the alarm release to
resume, if abnormity, it will send another alarm message. The PTZ can set up to 7 alarm input and 2 alarm
output.
Privacy zone masking
The user can set a black shadow to mask the area so that it will not appear on the monitor to protect privacy.
This function is relative with the type of the PTZ, if zoom camera hasn't this function, it is invalid)。
Lens position display
The position that the PTZ has finished to auto-checking as 0 point of pan movement and tilt movement. The pan
range is 0-360°, and tilt range is 0°°. According to the displayed information, to set the position of camera
lens, and the position can display on the screen.
a
（
Function Instruction
7

System Setting
4. 1. 1 Current-carrying to PTZ and
4. 1. 2 Call
4. 1. 3
Ø
【OPEN】
【CLOSE】
【NEAR】
【TELE】Increase
【WIDE】Reduce
【 】
.
【】
Press【TELE】and 【WIDE】at the same time, it means 3D joystick rotates joystick cap.
Ø
“”
Self-testing
The PTZ conducts self-testing after current-carrying , and it rotates slowly until displaying pan origin
that is default setting, then moving to tilt origin, the lens is adjusted from far zoom to near zoom, then from
near zoom to far zoom, when self-testing is finished, there is relevant system information displaying on the
screen, as follow:
The information will not disappear until you stop to operate the system. If you set“power up action”,
the PTZ will automatically activate motions after self-testing. How to operate the function? We will explain
detail introduction in following passages.
the main menu
The system enters into the main menu by calling 95 preset or by calling 9 preset twice within 3 seconds.
All the menu setting must enter into the main menu at first.
Menu and keyboard operation
Keyboard operation:
when choosing pictures, it means to increase Iris; when setting menu, it means to enter into the
next menu or setting, or means to save after setting.
when choosing pictures, it means to reduce Iris; when setting menu, it means to exit without
saving setting.
Focus to near
magnification
magnification
Joystick to up: When choosing menu, it means to choose the former one; when choosing picture, it
means camera tilt up.
Joystick to down: when choosing menu, it means to choose the next one; when choosing picture, it
means camera tilt down.
Joystick to left: when choosing menu, it is equal with CLOSE , when choosing picture, it means
camera tilt left
Joystick to right: when choosing menu, it is equal with OPEN , when choosing picture, it means
camera tilt right.
Menu operation
“BACK” : Back to the former menu
“EXIT” : Exit to menu
ON : Open some setting
“OFF ” : Close some setting
Soft edition
Protocol
PTZ ID
Communication parameter
4. 1 Basic operation
S/N:5DSAD7B24500000
FIRMWARE V1.00
Protocol: FACTORY
Comm 4800, N, 8.1
Dome Address：001
S/N:5DSAD7B24500000
FIRMWARE V1.00
Protocol: FACTORY
Dome Address：001
Comm 4800, N, 8.1
4. System setting
S/N of the PTZ
8

System setting
When using a lot of PTZs systems, in order to identify each PTZ,
the systems support title setting. The setting ways as follow
The system enters into the main menu by calling 95 preset or by calling
9 preset twice within 3 seconds.
Moving joystick up and down to move the cursor to SYSTEM SETTI-
NG , and pressing OPEN to enter into the next menu.
Moving joystick up and down to move the cursor to EDIT PTZ L-
ABEL , and pressing OPEN to enter into the label setting menu.
Moving joystick up/down to move the cursor to LABEL , and press-
ing OPEN to edit current label.
When the cursor is twinkling in the first character of the label, to move
joystick to choose character, after editing, pressing OPEN to save.
Moving joystick to BACK and pressing OPEN to back to the
former menu.
’
：
1、
2、【
】【】
3、【
】【】
4、【】
【】
5、
【】
6、【】【】
EDIT PTZ LABEL
LABEL： D88 SERIES
BACK
EXIT
4. 2 Edit dome label
NOTICE
The label may set 16 characters, and doesn't need editing
characters. Pressing OPEN continuously to jump over and
using spacebar to replace the deleted characters. When you finish
to edit a character, press OPEN to enter into the next editing
character; when you editing the last character, pressing OPEN
to save. Press Close to exit.
Characters of label available for choosing are as follow: 0- 9,
A-Z,:<>-., Space.
Other labels’ input ways are the same as above.
【】
【】
【】
【】
SYSTEM SETTING
EDIT DOME LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
PASSWORD SETUP
CLOCK SETTING
BACK
EXIT
9
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARMS
EXIT

The system enters into the main menu by calling 95 preset or by calling
9 preset twice within 3 seconds.
Tilt up/down joystick to SYSTEM SETTING , press OPEN to
enter submenu.
Tilt up/down joystick to INITIAL INFO , press OPEN to display
initial information as below the left picture .
Initial information includes S/N of the PTZ, soft edition, Protocol, PTZ
ID, communication parameter. System setting may change the numerical
value of initial information.
1、
2、【】【】
3、【】【】
4. 3 Display initial information
INITIAL INFO
S/N:5DSAD7B24500000
FIRM WARE V1.01
PROTOCOL：FACTORY
PTZ ADDRESS：001
COMM：4800,N,8,1
BACK
EXIT
SYSTEM SETTING
EDIT PTZ LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
PASSWORD SETUP
CLOCK SETTING
BACK
EXIT
System Setting
10
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARMS
EXIT

1、The system enters into the main menu by calling 95 preset or by calling
9 preset twice within 3 seconds.
2、Tilt up/down joystick to 【SYSTEM SETTING】, press 【OPEN】 to
enter submenu.
3、Tilt up/down joystick to【DISPLAY SETUP】, press 【OPEN】to enter
“display setup” menu, May setting the content of the display setup as
follow:
4、 Taking display PTZ label as an example to explain the operation proc-
ess. Tilt up/down joystick to move cursor to 【Dome LABEL OFF】, press
【OPEN】, there is a sign “ ” besides【Dome LABEL】, the cursor is
twinkling besides 【OFF】, as left picture shows;
5、Joystick tilt up/down, setting number changes between ON/OFF, when
setting 【ON】, it means to display“PTZ label”;when setting 【OFF】,
it means not to display “PTZ label”.when pressing 【OPEN】, the cursor
jump back in front of 【DOME LABEL】, means label setting is finished,
when moving the cursor to 【EXIT】, it means exiting the menu setting.
The displaying information on the screen will change with the PTZ
rotation; Through the information on the screen, user can see current PTZ
inside temperature, magnification, display zone etc. When all the label are
displayed, the PTZ works as the following picture shows,:
(In the picture “305” means pan angle, “45” means tilt angle. )
PRESET-05
PRESET-05
305 45
305 45
EAST
EAST
01X
01X
032
032
Temperature label
PTZ label
Zone label
Direction label
Zoom magnification label
Preset setting
4. 4 Display setup
DISPLAY SETUP
PTZ LABEL OFF
PRESET LABEL OFF
ZOOM LABEL ON
ZONE LABEL OFF
DIRECTION LABEL ON
TEMPERATURE LABEL OFF
TIME LABEL ON
DATE LABEL ON
BACK
EXIT
● 【DOME LABEL】
● 【PRESET LABEL】
● 【ZOOM LABEL】
● 【ZONE LABEL】
● 【DIRECTION LABEL】
● 【TEMPERATURE LABEL】
● 【TIME LABEL】
● 【DATE LABEL】
07/12/06
17:39:10
Date label
Time label
SYSTEM SETTING
EDIT PTZ LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
PASSWORD SETUP
CLOCK SETTING
BACK
EXIT
System setting
11
MAIN MENU
PTZ
PTZ
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARMS
EXIT

1、
2、【】【】
3、【】【】
4. 5. 1
、【】【】
“”
“” “”
【】
1. 【】
【】 “ ”
【】
【】 【 】
Systematic motion controlling may control a series of canonical mov-
ement of the PTZ, and play an important role in controlling the PTZ.
The system enters into the main menu by calling 95 preset or by calling
9 preset twice within 3 seconds.
Tilt up/down joystick to SYSTEM SETTING , press OPEN to e-
nter submenu.
Tilt up/down joystick to MOTION , press OPEN to enter syst-
ematic motion controlling menu, as left picture shows.
Auto flip
1 Operate joystick, move the cursor to AUTO FLIP : press OPEN
to enter auto flip setting, tilt up/down joystick, for example: choosing
"ON" to open auto flip ; choosing "OFF" to close auto flip .
Press OPEN to save.
Operate joystick, move the cursor to PROPORTIONAL PAN ; press
OPEN to enter proportion pan setting, tilt up/down joystick to ch-
oose, if choosing ON , it means to open proportion pan; if choosing
OFF , it means to close proportion pan , press OPEN to save.
4. 5 Systematic motion control
4. 5. 2 Speed proportion pan
When manually adjusting, for far focus situation, the PTZ
responds at a high-speed so that touching joystick slightly may
make picture move rapidly, thus cause the picture to lose. To
base on humanized design, the PTZ automatically adjust pan
and tilt rotation according to zoom near and far, which make it
is convenient to operate manually run after object.
OPERATION KNACKS
SYSTEM SETTING
EDIT PTZ LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
PASSWORD SETUP
CLOCK SETTING
BACK
EXIT
System Setting
12
MAIN MENU
MOTION
AUTO FLIP ON
PROPORTION PAN ON
PARK TIME 005
PARK ACTION SCAN
POWER UP ACTION AUTO
FAN ENABLED 050
TEMP C/F CENT
ADVANCE SETTING
BACK
EXIT
REMARK: When opening the auto flip function, user holds the joystick
in the down position, the camera rotates pan 180 degrees, after the camera
rotates tilt up to 210 degrees.
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARMS
EXIT

This setting allows the PTZ to run an appointed action after it enters
vacancy for a few time (1-240minutes). If default sets as 0, it means not to
run this action automatically.
1 Operate joystick, move the cursor to PARK TIME , press OPEN
to tilt up/down joystick to set park time, the range is 0-240 (minute), press
OPEN to save. PARK ACTON is running action at park time, when
PARK TIME sets as 0, this item can't be set.
2 Operate joystick, move the cursor to PARK ACTON , press OPEN
there will be a sign in the front of PARK ACTON , the cursor jump
to right, after tilt up/down joystick to choose park action ，there are
options for choosing as follow, press OPEN to save.
none action
use preset 1-80
run scan
run pattern X
run tour
Power up action
The PTZ start to run actions after self-testing, if nobody intervenes
it , it will repeatedly run this action continuously , if default sets as
NONE .
1. Operate joystick, move the cursor to POWER UP ACTION : press
OPEN to jump to the following choice, tilt up/down joystick to choose
power up action , press OPEN to save.
none action
the PTZ resumes the primary action and direction
before power up.
use preset 1
run scan
run pattern
run tour
、【】【】
【】 【 】
【】
、【】【】
【】
“”
【】
【NONE】- (default)
●【PRESET】 -
●【SCAN】 -
●【PAT1】 -
●【TOUR】 -
4. 5. 4
【】
【】
【】
“”【】
●【NONE】 -
●【AUTO】 -
●【PRESET】 -
●【SCAN】 -
●【PAT1】 -
●【TOUR】 -
●
4. 5. 5
【】【
】
【】
O
C.
O
C.【TEMP】can
switch the temperature between fahrenheit and centigrade.
Fan startup by temperature
The temperature of the PTZ will rise when it is in high temperature. The
fan will open automatically when the temperature reaches to a very high degree
value in order to make sure the stability of the PTZ.
Operate joystick, move the cursor to FAN ENABLED : press O-
PEN , the cursor will skip to the back option. The user can choose the fan
to start up temperature, and press OPEN to save it in actual condition.
The default setting temperature of the fan startup is 50 The user
also can enter into the fan startup setting to adjust the temperature of fan
startup. As picture shows: the temperature range is 0-60
4. 5. 3 Park action
System setting
13
MOTION
AUTO FLIP ON
PROPORTION PAN ON
PARK TIME 005
PARK ACTION SCAN
POWER UP ACTION AUTO
FAN ENABLED 050
TEMP C/F CENT
ADVANCE SETTING
BACK
EXIT
MOTION
AUTO FLIP ON
PROPORTION PAN ON
PARK TIME 005
PARK ACTION SCAN
POWER UP ACTION AUTO
FAN ENABLED 050
TEMP C/F CENT
ADVANCE SETTING
BACK
EXIT
MOTION
AUTO FLIP ON
PROPORTION PAN ON
PARK TIME 005
PARK ACTION SCAN
POWER UP ACTION AUTO
FAN ENABLED 050
TEMP C/F CENT
ADVANCE SETTING
BACK
EXIT

4.5.6 Advance setting
These function in the advance setting menu depends
on the models and parameters of built-in camera in
PTZ, if the camera haven't this function, then this
function is invalid. The option is useless (N/A)
when the camera module has no such function.
OPERATION KNACKS
1.After the PTZ set the EIS function, if the PTZ wobble slight
when running, the camera will shield the wobble picture and
make the picture calm and smooth.
2.When start-up preset freeze, it can eliminate the sense of flash
caused by calling presets when open function of Preset Freeze,
which can reduce the storage space of DVR if image is stored
by DVR.
NOTICE
1.Operate joystick and move to【ADVANCE SETTING】, press【OPEN】
to enter into "advance setting";
【EIS ENABLED】: Electronic Image Stabilizer function;
【PRESET FREEZE】: Function of Preset Freeze means during
calling presets, the monitor displays the image before call presets, and
releases the freeze image when camera arrives the appointed presets.
【DEFOGGER】: Lens of PTZ will be fogged when PTZ works in
quite cold temperature. In order to get clear image, defogger will open
automatically at the appointed temperature. Choosing 【DEFOGGED】by
operating the joystick, and press 【OPEN】, then cursor leap to the optional.
Choose the temperature to run the defogger, and press 【OPEN】to save.
Range of Temperature: 0~30℃.
【ADJ SPEED】：The rotation percentage of P/T, 100 means factory speed,
80 means 80% of factory speed.
【WIPER】: Wiper runs by calling 63 Preset.
【IR HEAD LIGHT】: Setting of Infrared light. Call 62 preset to run
Infrared light under the setting of【MANUAL】. Save 62 preset to close the
infrared.The default setting of infrared light is Auto MID.
【Delay time】: Setting the auto close time of IR light, ranging from
1-240 Minutes.
【BW】:Setting the imaging model after the IR light as ON, three modes
for choice:Auto, Color, Black.
【ACTIVATE AUX1】Whether to link AUX 1 when open the IR light,
“On”means Link. “OFF” means not to link.
System Setting
14
MOTION
AUTO FLIP ON
PROPORTION PAN ON
PARK TIME 005
PARK ACTION SCAN1
POWER UP ACTION AUTO
FAN ENABLED 040
TEMP CENT
ADVANCE SETTING
BACK
EXIT
ADVANCE SETTING
EIS ENABLED N/A
PRESET FREEZE N/A
DEFOGGER 10
A D J SPEED 100
WIPER
IR HEADLIGHT
BACK
EXIT
IR HEADLIGHT
IR HEADLIGHT MID
DELAY TIME 002
BW AUTO
ACTIVATE AUX1 OFF
BACK
EXIT

4. 6 Clear and restart
1、
2、【】【】
3、【】【】
● 【CLEAR ALL ZONES】
● 【CLEAR ALL PRESETS】
● 【CLEAR ALL PATTERNS】
● 【CLEAR ALL TOURS】
● 【CLEAR ALL WINDOWS】
● 【FACTORY DEFAULTS】:
● 【RESTART】
4、
【】【】
The system enters into the main menu by calling 95 preset or by calling
9 preset twice within 3 seconds.
Tilt up/down joystick to SYSTEM SETTING , press OPEN to
enter submenu.
Tilt up/down joystick to CLEAR , press OPEN to enter submenu,
as left picture shows.
resume the factory default. Run this funct-
ion, the camera parameter and system parameter will resume to factory default,
clear all windows and alarm setting. Please be cautious to use this function.
Set clear zone as an example to explain the process. Tilt up/down joyst-
ick to CLEAR ALL ZONES , press OPEN to clear all zones.
CLEAR
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL TOURS
CLEAR ALL WINDOWS
FACTORY DEFAULTS
RESTART
BACK
EXIT
NOTICE
Once clear all commands in the controlling menu,
it cann't resume, so please be careful of using it.
SYSTEM SETTING
EDIT PTZ LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
PASSWORD SETUP
CLOCK SETTING
BACK
EXIT
System setting
15
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARMS
EXIT

OLD PASSWORD：******
NEW PASSWORD：******
CONF PASSWORD：******
ENABLE PASSWORD：OFF
BACK
EXIT
PASSWORD SETUP
4.7 Password set
1.
preset twice within 3 seconds.
The system enters into the main menu by calling 95 preset or by calling 9
2. Operate the joystick up and down, move the cursor to SYSTEM
SETTING , press OPEN to call the submenu.
【
】【】
3. Operate the joystick up and down , move the cursor to PASSWORD
SETUP , press OPEN to call the submenu. Please refer to the left
picture.
【
】【】
4. Operate the joystick up and down , move the cursor to OLD
PASSWORD , press OPEN to choose it, operate the joystick right and
left to input the password, Tilt up and down to choose the number which you
need.
【
】【】
NEW PASSWORD Enter the new password●【 】
CONFIRM PASSWORD Confirm the new password●【 】
ENABLE PASSWORD Set PASSWORD off / on●【 】
(The password function is noneffective under the PASSWORD OFF.) It
means that users can enter into the main menu without password. (The password
function is effective under the password ON.) It means that user enter into
the main menu with password.
NOTICE
When user forgot the password and can not enter into the
main menu, he can use the super password to enter ,which
is "892226"，At this time ,the password of PTZ will
change to initial one, which is "000000",and then user may
set the password by himself again.
SYSTEM SETTING
EDIT PTZ LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
PASSWORD SETUP
CLOCK SETTING
BACK
EXIT
System Setting
16
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARMS
EXIT

TIME 03:20:18
DATE 07:10:10
DAY WED
BACK
EXIT
CLOCK SETTING
4.8 Time set
1.
preset twice within 3 seconds.
The system enters into the main menu by calling 95 preset or by calling 9
2. Operate the joystick up and down, move the cursor to SYSTEM
SETTING , press OPEN to call the submenu.
【
】【】
3. Operate the joystick up and down, move the cursor to CLOCK
SETTING , press OPEN to call the submenu. Please refer to the left
picture.
【
】【 】
4. Operate the joystick up and down, move the cursor to TIME , press
OPEN to choose it, move the joystick up and down to choose the
number you need, move the joystick right and left to set hour, minute,
second.
【】
【】
DATE set year, month, date;●【 】
DAY set week;●【 】
BACK return to the former menu;●【 】
EXIT exit the main menu.●【 】
SYSTEM SETTING
EDIT PTZ LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
PASSWORD SETUP
CLOCK SETTING
BACK
EXIT
System setting
17
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARMS
EXIT