Ruida Technology BWK301R User manual

Wireless controller BWK301R operating instructions
SHENZHEN RUIDA TECHNOLOGY
BWK301R
operating instructions
Read this manual before operation
The content include of electric connections and operating steps
Read the manual to operate the systems
RuiDa Technology Co., Ltd
Addr: 3th floor,Technology Building,NO.,1067 Nanhai
Avenue,Nanshan District,Shenzhen city,Guangdong
Province,P.R.China
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.rd-acs.com

Wireless controller BWK301R operating instructions
SHENZHEN RUIDA TECHNOLOGY
COPYRIGHT
All rights reserved.You may not reproduce, transmit, store in a
retrieval system or adapt thispublication, in any form or by any
means, without the prior written permissionof RuiDa, except as
allowed under applicable copyright laws. We have identifiedwords
that we consider as trademarks. Neither the presence or absence
oftrademark identifications affects the legal status of any
trademarks.

Wireless controller BWK301R operating instructions
SHENZHEN RUIDA TECHNOLOGY
CERTIFICATION DECLARATION
CE
The product has been certified by the CE (Commutate European) safety certification. It
has passed the corresponding conformity assessment procedure and the manufacturer's
declaration of conformity, in accordance with the relevant EU directive.
ROHS
This product has been certified by EU legislation (Restriction of Hazardous Substances)
Safety certification; comply with relevant EU environmental regulations.
FCC
This product has been certified by the Federal Communications Commission for safety,
Comply with us electronic safety regulations.

Wireless controller BWK301R operating instructions
SHENZHEN RUIDA TECHNOLOGY
SAFETY INFORMATION
When using this system, please make sure the operation is correct and the usage is safe.
Some signs or text will be used to remind you to pay attention to the dangerous matters
and some important information.
Dangerous：
Indicates a serious danger. In the process of use, if the operation is
improper or the way of use is wrong, it may cause serious injury or even
death to the user. Please do not operate it easily until you have made
sure that the operation method is correct and the way of use is correct.
Warning：
Danger.n the process of use, if the operation is improper or the use is
wrong, which may lead to the injury of the personnel, please do not
operate the personnel and related personnel easily, until ensure the
correct operation method and use method is correct before use.
Cautious：
Represents the potential risk of the product. In the process of use, if the
use method is wrong or improper operation, it may cause damage to the
product or some parts. Please do not use it until you have made sure
that the operation method is correct and the usage is correct.
Important：
Represents important information to be paid attention to during the use
of the product.Please do not ignore this information, this information will
provide effective operational help.
This sign indicates laser radiation, which is usually posted on products
with laser output. Please be careful with laser and pay attention to safety
when using this kind of equipment.

Wireless controller BWK301R operating instructions
SHENZHEN RUIDA TECHNOLOGY
Sign in、Devanning、Examine cargo
The product itself with plastic or metal shell, can protect the external electrical components
from damage. The products are packed in foam bags and anti-static bags. If there is any
external damage to the package, check the equipment and notify the carrier and carrier in
writing of the damage.
Inportant:
After receiving the product, please check whether the outer package is intact,
check whether the product is complete after unpacking and whether all
parts are intact. If any damage is found, please contact ruida immediately.
Remove all cargo from package and keep packing material and wiring parts. Please take
care of the safety of the goods when unpacking them.After taking out the goods, please
check whether the parts are complete and intact. If any missing parts or damaged parts are
found, please contact ruida technology immediately.Do not install or debug the equipment
if any obvious damage is found.

Wireless controller BWK301R operating instructions
SHENZHEN RUIDA TECHNOLOGY
Contents
Chapter 1 Overview......................................................................................................................................1
Chapter 2 wireless controller.......................................................................................................................3
Chapter 3 Receiver of the wireless controller............................................................................................. 7
Chapter 4 Connection between wireless controller and main board.........................................................9
4.1 Connection with RDC64XXG.............................................................................................................10

Wireless controller BWK301R operating instructions
SHENZHEN RUIDA TECHNOLOGY
1
Section 1 Overview
CONTENTS:
Overview

Wireless controller BWK301R operating instructions
SHENZHEN RUIDA TECHNOLOGY
2
1.1 Overview
The wireless controller BWK301-232 consists of two parts: a wireless controller and a wireless
receiver. The wireless controller establishes wireless communication with the wireless receiver, and the
wireless receiver is wired to the RDC64XXG main board, so that the user can perform stable and reliable
control of the cutting process through the wireless controller within a certain range (40m), which is
convenient for the user to operate. The system enables the user to operate the system in the place where
the object is processed in the production process without having to return to the console every time to
operate the system through the operation panel, thereby improving work efficiency and being convenient
and reliable. Works in parallel with the operator panel of the controller without interference.

Wireless controller BWK301R operating instructions
SHENZHEN RUIDA TECHNOLOGY
3
Section 2 wireless
controller
CONTENTS:
wireless controller

Wireless controller BWK301R operating instructions
SHENZHEN RUIDA TECHNOLOGY
4
2.1 wireless controller
Wireless controller and receiver are shown as picture 1。
Picture 2-1 BWK301R wireless controller
The definition of the keys on the panel are as follows:
“Shutter” ：shutter of the laser source，enable the laser or disable the laser
“Aux” ：switch on or switch off the auxiliary gas
“Follow” ：Enable/disable the distance controller
“Pulse” ：Laser emission
“Frame” ：Moving with the maximum border of the cutting file
“U” ：Manual movement of U axis
“X +/-” ：Manual movement of X axis
“Y +/-” ：Manual movement of Y axis
“Z +/-” ：Manual movement of Z axis
“fast/slow” ：Set the fast or slow manual speed of axes
“Home” ：Back stop position