Russell Hobbs Temptations User manual

instructions

2

3
Read the instructions and keep them safe. Pass them on if you pass the appliance on.
Remove all packaging, but keep it till you’re satisfied the appliance works.
important safeguards
Follow basic safety precautions, including:
1 The chocolate fountain must only be used by or under the supervision of a
responsible adult.
2 Don’t put the base in liquid, don’t use the chocolate fountain in a bathroom,
near water, or outdoors.
3 The chocolate is heated to around 50°C – don’t let it come in contact with skin. Use
skewers, forks, tong, etc. for dipping – not fingers.
4 Sit the chocolate fountain on a stable, level, heat-resistant surface, at least 75cm
above the floor, and leave at least 50mm clear space all round it.
5 This appliance must not be operated by an external timer or remote control system.
6 Route the cable so it doesn’t overhang, and can’t be tripped over or caught.
7 Keep the chocolate fountain and the cable away from hotplates, hobs or burners.
8 Unplug the chocolate fountain when not in use, before moving and before cleaning,
let it cool before moving and cleaning.
9 Don’t use the chocolate fountain for any purpose other than those described in
these instructions.
10 Don’t use the appliance if it’s damaged or malfunctions.
11 If the cable is damaged, the appliance must be returned, in order to avoid hazard.
household use only
before using for the first time
Turn to “care and maintenance” on page 5, and clean the chocolate fountain, to remove
manufacturing residues, dust, etc.
how it works
• Put a mixture of melted chocolate and cooking oil into the heated bowl on top of
the base. The auger pulls the chocolate mixture up the central tube, pushes it out
the top, and it cascades over the tiers, back into the bowl.
• Put a piece of fruit (or something equally tasty) on the end of a skewer, hold the fruit
in the chocolate flow, and turn it, to coat it all over.
• Pass it to someone who doesn’t mind putting on weight.
• Alternatively, pretend that the healthy bits in the fruit exactly counterbalance the
unhealthy bits in the chocolate and oil, and eat it yourself.
setting up
1 Sit the chocolate fountain on a stable, level, heat-resistant surface, at least 75cm
above the floor, and leave at least 50mm clear space all round it.
2 Turn the adjustable feet at the front of the base, to level the base. If it’s not level, the
chocolate won’t flow evenly.
3 Push the central tube through the hole in tier 1, and locate the slots in the centre of
the tier over the tabs on the tube.
4 Do the same for tier 2.
5 Fit tier 3 on top of the tube, and turn it to engage the bayonet fitting. Everything
should fit together snugly, otherwise the chocolate won’t flow evenly.

4
6 Fit the auger over the drive shaft in the centre of the base. The drive shaft and the
hole in the bottom of the auger are triangular in section.
7 Lower the tube and tiers over the auger, till the locating lugs at the bottom of the
tube fit snugly over the locating pins in the base. The gap left between the base and
the bottom of the tube allows the chocolate to flow up the tube.
8 Check that everything is off – turn both controls to 0.
9 Put the plug into the power socket (switch the socket on, if its switchable).
10 Turn the heat switch to 1, and leave the base to warm up (5 minutes).
oven gloves
From here on, things are going to get a bit hot, so use oven gloves – a folded tea towel
will do, but it can be a bit awkward to use – a good pair of oven gloves is best.
melting the chocolate
You’ll need 900g of chocolate, broken into smallish bits, and a heatproof and/or
microwave-proof bowl big enough so the chocolate only half fills it.
a) Put the bowl in a microwave oven, microwave on full power for 1 minute, then
remove from the microwave and stir. Repeat, till the chocolate has fully melted.
b) Sit the bowl in a pan of hot (not boiling) water, over a lowish heat, and stir till the
chocolate has fully melted.
There mustn’t be any lumps, or the chocolate won’t flow properly.
adding the oil
• Ideally, you need just enough oil to make the mixture runny enough to flow evenly
over the fountain, but thick enough to coat the fruit (or whatever you’re coating).
• The oil should be as bland and tasteless as possible – the taste is meant to come
from the chocolate.
• This depends entirely on the chocolate and the oil, so we can’t give you more than
the broadest guidelines. Experiment with different chocolates and oils – keep notes.
• We suggest you use one part oil to three parts chocolate, by volume, but keep a
little of the oil back, just in case.
• Stir the oil into the chocolate a bit at a time.
• If you’re cooking on the hob, do this in the bowl, over the pan of hot water.
• If you’re using a microwave oven, you may have to return the mixture to the
microwave to warm it up again – heat for no more than 30 seconds at a time, and
stir vigorously after heating.
fountaineering
• Tip the chocolate and oil mixture into the bowl on the base of the chocolate
fountain, turn the fountain switch to 1, and watch the flow.
• If it’s a bit sluggish, mix a little more oil into the bowl, and let the fountain circulate
the added oil for a bit, to ensure it’s fully mixed through.
• If the flow is off centre, adjust the feet at the front of the base to centre it.
• When everything is moving nicely, call in the family, give them a skewer each, and
start coating.
• Whatever you’re coating should be fairly dry. Water and juices harden chocolate.
• You can coat whole small fruit like strawberries, or cubes cut from larger fruit, bread,
cake, cheese, marshmallows, rhubarb – anything you think might go with chocolate.

5
advanced fountaineering
On the opposite page, we said to use bland, tasteless oil. Once you’ve used the
chocolate fountain a few times, when you’ve got the hang of it, and discovered the
taste of different kinds of chocolate, you might like to experiment a bit.
flavoured oils
You could try adding a little of the many flavoured oils available, though you’ll need to
take care with the quantities. Underdone can be corrected by adding a little more,
overdone can only be corrected by emptying the fountain and melting more chocolate.
flavoured spirits
Many spirits, such as Gran Marnier, Kahlúa, Tia Maria, Crème de Menthe, Rum, Brandy,
go well with chocolate. Be careful, as these are all water based, and water will tend to
harden the chocolate, but 2-3 teaspoons, well mixed, shouldn’t cause a problem.
If you’re worried about the alcohol, heat the spirits in a pan first. The alcohol will boil
off at about 80°C. Let the residue cool before adding to the chocolate/oil mixture.
artificial flavourings
These tend to be highly concentrated, so you should take even more care with them.
Measure by the drop, rather than by the teaspoon.
research fountaineering
What’s the difference between chocolate from a chocolate fountain and cheese from a
fondue maker?
OK – Apart from the taste, what’s the difference between chocolate from a chocolate
fountain and cheese from a fondue maker?
Could you mix melted cheese and wine together and get the same degree of runniness
you need for the chocolate fountain?
If the answer is “yes!”, then you’ve got yourself a fondue fountain.
How about a barbecue sauce fountain?
If you can make barbecue sauce to the same consistency, and dip pieces of cooked
meat instead of strawberries or marshmallows ...
Come to think of it, what’s wrong with strawberries and marshmallows in barbecue
sauce? Go on, try it, just once. You may be surprised. You may even go back for more.
A sweet and sour sauce fountain? – dip cooked prawns, veg, rice balls.
If you think of anything else, keep notes on pages 6 and 7.
care and maintenance
1 Switch off (turn both switches to 0), unplug, and let the chocolate fountain cool.
2 Remove the tube, tiers, and auger before the chocolate gets too thick.
3 Wash them in warm soapy water, then dry. You can put them in a dishwasher, but
we don’t recommend this. The harsh environment may affect the surface finishes.
4 Tip the remaining chocolate and oil into a bowl for next time. Neither chocolate nor
oil do well in the fridge, so you should take the mixture out and let it reach room
temperature before reusing.
5 Clean the bowl with kitchen towel, finish off with a damp cloth. Use a bit of kitchen
paper moistened with a little cooking oil to remove stubborn stains.
6 Don’t put the base in water or any other liquid.
7 Don’t use harsh or abrasive cleaning agents or solvents.

6
notes

7
notes

8
connection
The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363
plug. To replace the plug, fit the green/yellow wire to E or E, the blue
wire to N, and the brown wire to L. Fit the cord grip.
If in doubt, call an electrician.
Don’t use a non-rewireable/moulded plug unless the fuse cover is in
place. If you remove the plug, dispose of it.
service
The product isn’t user-serviceable. If it’s not working, read the instructions, check the
plug fuse and main fuse/circuit breaker. If it’s still not working, consult your retailer. If
that doesn’t solve the problem:
Pack carefully, with a note of your name, address, day phone number, and what’s
wrong. If under guarantee, say where and when purchased, and include proof of
purchase (till receipt). Send it to Customer Returns (address below right). They’ll give
you an estimate for inspection/repair.
Customer Service Customer Returns
(correspondence only) Salton Europe Ltd
Salton Europe Ltd Heath Mill Road
Failsworth Wombourne
Manchester Wolverhampton
M35 0HS WV5 8AQ
Customer Service ([e-mail])
telephone [phone] (local rate number)
guarantee
Defects affecting product functionality appearing within one year of purchase will be
corrected by replacement or repair provided the product is used and maintained in
accordance with the instructions. Your statutory rights are not affected.
Documentation, packaging, and product specifications may change without notice.
439-310