The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your
DETAIL SANDER or when ordering repair parts.
RYOBI DETAIL SANDER – MODEL NUMBER DS1100
1 975860-001 DATA PLATE................................................. 1
2 990908-009 SCREW (#6-19 X 5/8 IN. PAN HD.) ............ 12
3 972031-000 HOUSING ASSEMBLY.................................. 1
4 968303-102 SWITCH ASSEMBLY (INC. KEY NO. 5) ....... 1
5 971443-001 SWITCH COVER........................................... 1
6 972983-002 SPHERICAL RING ........................................ 1
7 975625-001 ARM SUPPORT ............................................ 1
8 972410-001 SLEEVE BEARING........................................ 1
9 969808-013 MOTOR ASSEMBLY (INC. KEY NO. 8)........ 1
10 971660-001 BLACK LEAD................................................. 1
11 975626-001 ARM COVER ................................................. 1
12 970777-014 CORD ASSEMBLY........................................ 1
13 973392-001 LOGO PLATE ................................................ 1
14 975627-001 ARM............................................................... 1
15 975784-001 DOWEL PIN................................................... 1
16 971884-000 SANDPAPER................................................. 1
17 971654-001 RUBBER PAD ............................................... 1
18 972055-001 FOOT W/PAD (INCLUDES KEY NO. 17)...... 1
19 967273-001 SCREW (#4-24 X 3/8 IN. PAN HD.) .............. 1
20 971646-001 FOOT COVER ............................................... 1
21 612284-003 CAP SCREW
(#8-32 X 7/16 IN. HEX SOCKET) .................. 1
22 979860-001 RUBBER WASHER ....................................... 1
972000-426 OWNER’S MANUAL
9-98
Key Part
No. Number Description Quan. Key Part
No. Number Description Quan.
PARTS LIST
WARNING:
IMPROPER REPAIR OF A DOUBLE INSULATED TOOL CAN RESULT IN DAMAGES TO THE DOUBLE INSULATION SYSTEM POSSIBLY
CAUSING ELECTRICAL SHOCK OR ELECTROCUTION. ANY REPAIRS REQUIRING DISASSEMBLY OF YOUR TOOL REQUIRES SAFETY
TESTING AND SHOULD ONLY BE PERFORMED BY A RYOBI AUTHORIZED SERVICE CENTER OR OTHER QUALIFIED SERVICE
ORGANIZATION.
