Ryobi DS11008G Quick setup guide

RYOBI
DETAIL SANDER
MODEL NUMBER
DS11008G
REPAIR SHEET

2
RYOBI DETAIL SANDER – MODEL NUMBER DS11008G
WARNING: The foot cover, key number 7, insulates the cap screw, key number 8, making it part of the double insulated system. Therefore, it must
always be replaced when replacing parts or making repairs to this tool.
4
5
6
7
8
9
3
1
2

3
RYOBI DETAIL SANDER – MODEL NUMBER DS11008G
The model number will be found on a label attached to the motor housing. Always mention the model number in all correspondence regarding your
DETAIL SANDER or when ordering repair parts.
PARTS LIST
WARNING: Improper repair of a double insulated tool can result in damages to the double insulation system possibly causing electrical shock
or electrocution. Any repairs requiring disassembly of your tool requires safety testing and should only be performed by a Ryobi Authorized
Service Center or other qualified service organization.
1 941121222 Data Plate ............................................................................................................................................... 1
2 941002107 Logo Label .............................................................................................................................................. 1
3 300552006 Sandpaper .............................................................................................................................................. 1
4 560716001 Felt Pad................................................................................................................................................... 1
5 300550004 Pad Assembly (Inc. Key No. 4) ............................................................................................................... 1
6 660162001 Screw (#4-24 x 3/8 in. Pan Hd.).............................................................................................................. 1
7 550359002 Foot Cover .............................................................................................................................................. 1
8 660169009 Cap Screw (#8-32 x 7/16 in. Hex Socket) .............................................................................................. 1
9 560636001 Rubber Washer ....................................................................................................................................... 1
NOT SHOWN
972000876 Owner’s Manual (961152217)
4-14-15
(Rev:01)
KEY PART
NO. NUMBER DESCRIPTION QTY

4
RYOBI DETAIL SANDER – MODEL NUMBER DS11008G
WIRING DIAGRAM
MOTOR
SWITCH
BLACK
POWER
CORD
BLACK
WHITE