Rysam SN99V User manual

Model：RSN99V
FFP3 NR
USER INSTRUCTIONS
Failure to follow the instructions and warning on the use of this mask during all times of exposure can reduce the
effectiveness of the mask and could result in illness or disability.
A copy of the Declaration of Compliance will be provided with every smallest commercially available package.
As with any respiratory device, the wearer must be adequately trained prior to use. Before use, the wearer should
always check the mask is in good condition - no dirt, no damage to headharness attachment etc.
Limitation:
Do not use the respirator or enter or stay in a contaminated area under the following circumstances:
a Atmosphere contains less than 19.5% oxygen.
b If you smell or taste contaminant.
c For protection against gases or vapors.
d Contaminants or their concentrations are unknown or immediately dangerous to life or health.
e For sandblasting, paint-spray operations and asbestos treatment.
f In explosive atmospheres.
Warning:
1This mask marked “NR”, shall not be used for more than one shift.
2Never substitute, modify, add, or omit parts in the configuration as specified by the manufacture.
3This mask helps protect against certain particulate contaminants but does not completely eliminate exposure to
the risk of contracting disease or infection.
4It is unlikely that the requirements for leakage will be achieved if facial hair passes under the face seal.
5Change the mask immediately if breathing becomes difficult or the mask becomes damaged or distorted.
6Change the mask if a proper face seal cannot be achieved.
FITTING INSTRUCTION
1 Hold the particle half mask in position over the nose and mouth.
2 Pull lower strap over the head and fit around the back of the neck.
3Pull the upper strap over the head positioning it just above the ears.
4Ensure the nose clip is securely molded around the nose, resting the ends against the cheek to obtain a good
seal.
5To check for proper fit, cup both hands over the mask and exhale vigorously. If air leaks around the nose, tighten
the nose clip, if air leaks around the edge, reposition the head harness for better fit.
6Repeat adjustments until the mask is sealed properly.
7If a proper seal cannot be achieved do not enter the contaminated area or it may cause illness.

Storage
1 Store the mask in a sealed container away from contaminated areas when not use.
2 Store the mask in the original packing during transport.
Notified body: CCQS Certification Services Limited.
Address: Block 1 Blanchardstown Corporate Park, Ballycoolin Road, Blanchardstown, Dublin15, D15 AKK1,
Ireland (NB 2834).
Manufacturer: Dongguan Rysam Medical Equipment Manufacturing Co.,Ltd
Address:3/ F, building 2, Xinghaisheng Industrial Park, No. 2 Junye Road, Dongkeng, Dongguan City, Guangdong
Province
Certificate of Approval
Brand:Rysam
Product Name: Particle filtering half mask (Non Medical)
Model: RSN99V
Quantity:5pcs/bag
Specification:head-mounted 150×120mm
Main raw materials: Needled cotton 80%. Nano melt blown filter material 20%
Executive Standard: EN149:2001+A1:2009 FFPF3NR
Production Batch: 202008A
Production Date: 2020/08/12
Useful life: 2023/08/11
Inspector:
Manufacturer:Dongguan Rysam Medical Equipment Manfacturing Co. Ltd
Add:Room 302, Building 2. No.2 Junye Road,Dongkeng Town, Dongguan City. Guangdong Province, P.R. China
http://rysam.cn