Saber Compact II ATD-80300 User manual


ATD‐80300
PROFESSIONALRECHARGEABLEMULTI‐HEADLEDLIGHTKIT
USER’SMANUAL









FEATURES:
•UniqueDesignOffersMultipleLightHeadDesignsToUseWithTheSameLithium‐IonRechargeableBatteryPack
•MadeofSuperToughAircraftGradeAluminum
•MultipleScrew‐OnLightHeadChoicesAllowsTheRightLightForTheRightJob
•IP54RatedForDust&WaterResistance
•3‐4HourRunTimeOnFullBatteryCharge
•AutomaticChargingProtection

KITINCLUDES:
•3.7V,2,000mAhBatteryPackBasewithSwitch(ATD‐80314)
•2‐WattLEDLightHeadwithFocusingBeam(ATD‐80310)
•1‐WattLED14.5”LongFlexibleInspectionLightHead(ATD‐80312)
•BatteryPackRechargingBaseWithLEDChargeIndicator&MagneticBase(ATD‐80315)
•5V,0.8AWallCharger(ATD‐80316)
•40.5”LongUSBChargingCable
•CustomCarrying/StoragePouch(ATD‐80317)

OPTIONALACCESSORIESAVAILABLE:
•2‐WattCOBLEDWorkLightHead(ATD‐80311)
•UVLeakDetectionHead(ATD‐80313)




CaliforniaProp65WARNING:
Thisproductcontainschemicalsincludinglead,knowntotheStateofCaliforniatocausecancer,birthdefects,orother
reproductiveharm.Washhandsafterhandling.

GeneralSafetyWarnings:

WARNING:Theinstructionsandwarningscontainedinthismanualshouldbereadandunderstoodbeforeusingor
operatingthistool.Donotallowanyonetouseoroperatethistooluntiltheyhavereadthismanualandhavedevelopeda
thoroughunderstandingofhowthistoolworks.Failuretoobserveanyofthefollowinginstructionscouldresultinsevere
personalinjurytotooluserandbystanders,orcausedamagetothetoolandproperty.Keepthismanualforfuture
reference.

Note:Thewarningsandcautionsdiscussedinthisinstructionmanualcannotcoverallpossibleconditionsand
situationsthatmayoccur.Itmustbeunderstoodbytheoperatorthatcommonsenseandcautionarefactorswhichcannot
bebuiltintothisproduct,butmustbesuppliedbytheoperator.

WARNING:Usesafetyequipment.Usersandbystandersshouldusesafetygogglesorsafetyglasseswithside
shieldswhichcomplywithcurrentnationalstandards,orwhenneeded,afaceshield.UseanANSIapproveddustmaskor
respiratorwhenworkingaroundmetal,wood,andchemicaldustsandmists.Thisappliestoallpersonsintheworkarea.
Alsousenon‐skidsafetyshoes,hardhat,gloves,dustcollectionsystems,andhearingprotectionwhenappropriate.
WARNING:Keepbystandersandchildrenoutoftheworkareawhileoperatingthistool.

WARNING:Alwayskeepyourworkareaclean,uncluttered,andwelllit.Clutteredordarkareasinviteaccidents
andinjuries.DONOTworkonfloorsurfacesthatareslippery.

WARNING:Donotoperatethistoolifyouaretiredorundertheinfluenceofalcohol,drugs,ormedicationsthat
couldaffectyourabilitytousethetoolproperly.

WARNING:Dressproperly.Donotwearlooseclothingorjeweleryastheycanbecaughtinmovingparts.Wear
restrictivehaircoveringtocontainlonghair.

WARNING:Donotreachoveroracrossrunningmachines.Keepproperfootingandbalanceatalltimes.Non‐skid
footwearisrecommendedwhenworking.


CordlessElectricalSafetyWarnings:

WARNING:Readallsafetywarningsandinstructions.Failuretofollowallwarningsandinstructionsmayresultin
electricshock,fireand/orseriousinjuryordeath.

WARNING:Toreducetheriskofelectricshock,DONOTuseindampconditions,onwetsurfaces,orexposetorain.
Donotpluginthistooloroperateitwithwethandsorwhilestandinginwater.

WARNING:Alwaysremovethechargingcordfromtheelectricoutletwhenmakingadjustments,changingparts,
cleaningorworkingonthetool.


WARNING:Careshouldbetakentoarrangethechargingcordsoitwillnotbesteppedon,trippedover,or
otherwisesubjectedtodamageorstress.

WARNING:Neverattempttopluginoroperateequipmentwithdefectiveordamagedwires,powercordorpower
cordplug.Haveanydefectiveordamagedpartsreplacedimmediatelybyqualifiedpersonnel.

WARNING:Avoidbodycontactwithelectricallygroundedsurfaces.Thereisanincreasedriskofelectricshockif
yourbodyisgrounded.

WARNING:IftheworkareaisnotequippedwithapermanentlyinstalledGroundFaultCircuitInterrupteroutlet
(GFCI),useaplug‐inGFCIbetweenthepowertoolorextensioncordandthepowerreceptacle.

Beenvironmentallyconscious:Disposeofbatteriesasmandatedbyyourstateorlocallaws.
Donotdisposeofbatteriesinafire.Thismayresultinanexplosion.Formoreinformationonrecyclingbatteries,calltoll‐
free(800)822‐8837.



ATD‐80300SpecificSafetyInstructions:

WARNING:Read all instructions before using

WARNING:For indoor use only – do not use in or around, tubs, showers, sinks, pools, hot tubs, or in a wet
environment

WARNING:Use only the recommended voltage and frequency requirements

WARNING:Do not move or turn off light by pulling the charging cord
WARNING:Do not use if the cords or clear tube are damaged
WARNING:Keep out of reach of children
WARNING:Do not operate light with wet hands.
WARNING:Keep lamp away from hot objects.




Oper g
•To use, plug the unit into any 110-120 VAC power source, such as a wall receptacle. Let the unit fully charge un l the
green indicators on the charger base turn on.
•Charge this light every month if not in constant use, and a er each use if it is used o en to insure longevity.
•Connect light head to ery pack. Take c n not to cross thread the threads on the light or on the ba ery pack.
•Press the switch at the of ery pack to turn unit on, press the switch again to turn the unit off.
Assembly Instructions:
•Screw light head to ba ery pack. Clockwise to ch, counter-clockwise to detach.
•Take c n not to cross thread the threads on the light or on the pack.
•DO NOT use excessive force when heads to ba ery pack.
OR:

ATD-80300
Visit us at www.atdtools.com
Copyright (C) 2013 ATD Tools, Inc. All rights reserved.
ORDERING PART# PART DESCRIPTION
ATD-80310 2W COB LED LIGHT HEAD
ATD-80312 1W FLEXIBLE INSPECTION LIGHT HEAD
ATD-80314 BATTERY PACK
ATD-80315 CHARGER BASE
ATD-80316 AC WALL CHARGER AND USB CABLE
ATD-80317 POUCH
ORDERING PART# PART DESCRIPTION
ATD-80311 2W COB LED WORK LIGHT HEAD
ATD-80313 UV LEAK DETECTION LIGHT HEAD
OPTIONAL AVAILABLE ACCESSORIES
ATD-80316
ATD-80312
ATD-80317
ATD-80310 ATD-80314
ATD-80315
ATD-80311 ATD-80313
AVAILABLE ACCESSORIES
(NOT INCLUDED IN KIT)