Sabiana SkyStar User manual

NEW
Control board
with Modbus
communication protocol
Air Conditioning
SkyStar
SkyStar ECM
Cassette Fan Coil Units
Quality management systems
ISO 9001 – Cert. n° 0545/5
www.eurovent-certification.com
www.certiflash.com

Sabiana take part to the Eurovent program of fan coil performance certification.
The official figures are published in the web site
www.eurovent-certification.com and in the web site www.certiflash.com.
The tested performances are:
• Fan absorption • Water pressure drop • Sound power
• Heating emission (2 pipe units) at the following conditions:
- Entering water temperature +50°C
- Entering air temperature +20°C
- Water flow rate as for the cooling conditions
• Heating emission (4 pipe units) at the following conditions:
- Water temperature +70°C E.W.T. +60°C L.W.T.
- Entering air temperature +20°C
• Cooling total emission at the following conditions:
- Water temperature +7°C E.W.T. +12°C L.W.T.
- Entering air temperature +27°C dry bulb +19°C wet bulb
• Cooling sensible emission at the following conditions:
- Water temperature +7°C E.W.T. +12°C L.W.T.
- Entering air temperature +27°C dry bulb +19°C wet bulb
CONTENTS
• SkyStar
• Introduction Page 3
• Main components Page 4
• EUROVENT Certifications Page 5
• Emissions Page 6
• Water side pressure drop Page 9
• Working conditions Page 9
• Dimensions and weights Page 10
• Air throw Page 12
• Fresh air supply e Air distribution Page 13
• Accessories Page 14
• CRYSTALL electrostatic filter Page 16
• Wall electronic controls Page 20
• FreeSabiana wireless control system Page 24
• Controls for SK−MB versions Page 26
• Electric heater SK−E Page 27
• SkyStar ECM
• Introduction Page 28
• Main components Page 29
• EUROVENT Certifications Page 30
• Emissions Page 31
• Water side pressure drop Page 33
• Working conditions Page 33
• Dimensions and weights Page 34
• Air throw Page 36
• Accessories Page 37
• SK−ECM configuration Page 39
• Wall electronic controls Page 40
• Controls for SK−ECM−MB versions Page 42
• SkyStar / SkyStar ECM
• MB power electronic board Page 43
• T-MB wall mounted control Page 44
• RT03 infra-red remote control Page 45
• PSM-DI multifunction control Page 47
• Sabianet management system Page 48
• PSM-DI and Sabianet accessories Page 48
• SkyStar MCT
• Introduction Page 51
• Dimensions and weights Page 52
• Assembly diagram Page 53
• Components of the casing e Valve kit Page 54
MD-600
Version

Innovating and beautiful design, seven different sizes, high control flexibility, easy maintenance: the
new SkyStar chilled water cassette is the result of an extended technical and design development
aimed at achieving the highest level in terms of performance, silent operation and control
possibilities.
The air diffuser has an highly attractive aesthetical appearance, very innovative, and is also able
to offer the best air distribution performance thanks to long computer studies and laboratory tests.
The standard colour is RAL 9003, other colours available on request.
The 4 smaller sizes are designed to fit into 600x600 mm false ceiling standard modules. The 3
bigger sizes have a dimension of 800x800 mm which allows the best outcome in terms of quiet-
ness and of price/performance ratio for these high capacity models.
Every unit can be supplied with 1 battery (2 pipe system) and a possible electric heater or with
2 batteries (4 pipe system). Each model can have fresh air intake and a remote air diffuser can
be connected to the unit.
The condensate pump is integral
with the unit, is very quiet and has
a maximum head of 650 mm.
In addition to the temperature and
speed standard controls, automatic
speed selection is also available. More
than one unit can be connected to
a single control, and the unit control
panel can be installed in a position that
facilitates the maintenance operation.
Every unit can also be operated by the
means of an infra-red remote control.
The SkyStar cassettes can also be
connected to the most common
automatic building management
systems.
It is also possible to use a completely
wireless electronic control system
based on radio communication called
Free Sabiana, with great advantages
in terms of installation flexibility and
maximum precision in measuring
room temperature.
Finally, each unit can be equipped
with a low energy consumption electric
motor that is controlled by an inverter
card that makes possible continuous
air flow variations.
3
SkyStar
Introduction

4
INTAKE GRID AND DISTRIBUTION OF THE AIR
Intake grids, frame and adjustable air distribution louvers on each side, made from ABS.
HTA version : white ABS, RAL 9003
HTB version : with intake grid, frame and louvers, choice of one colour only
HTC version : with intake grid and louvers, choice of one colour, plus white ABS frame RAL 9003
HTD version : with louvers, choice of one colour, while the grid and frame are made from ABS,
RAL 9003
MD-600 version : metal diffuser painted in RAL 9003 white colour with 600x600 dimension to perfectly
fit into the false ceiling standard modules without overlapping parts (800x800 model
is not available).
CASING
Is made from galvanized steel with inside thermal insulation with polyolefin (PO) foam (class M1) and
outside anti-condensate lining.
CONTROL PANEL
Made of an external box with the control electronic board with an easily accessible terminal board.
FAN ASSEMBLY
The fan assembly, which is mounted on anti-vibrating supports, is extremely silent.
The radial fan has been designed to optimise performance, using wing profile blades with a shape that
reduce turbulence, increasing efficiency and reducing noise.
The single air inlet radial fan is connected to a 6 speed electric motor with single phase 230V/50Hz supply,
class B insulation and integrated Klixon thermal contact for motor protection.
The units are supplied with 3 standard speeds connected and it is possible to change them on site if
necessary.
HEAT EXCHANGER
Made of copper tubes with bonded aluminium fins for maximum transfer contact.
The batteries are with 1, 2 or 3 rows for 2 pipe models and 2+1 rows for 4 pipe models (the heating row
is on the inside part of the battery).
For 4 pipe systems two versions are available:
SK 04, SK 14, SK 24, SK 34, SK 44, SK 54, SK 64 supply an higher heating emission;
SK 26, SK 36, SK 56, SK 66 supply an higher cooling emission.
The heat exchanger is not suitable for use in corrosive atmosphere or in environments where aluminium
may be subject to corrosion.
CONDENSATE COLLECTION TRAY
High density ABS polystyrene foam condensate tray, shaped in order to optimize the air diffusion, fire
retardant rating B1 to DIN 4102.
AIR FILTER
Synthetic washable filter, easily removable.
CONDENSATE PUMP
Float switch centrifugal pump with 650 mm of maximum head, integral to the unit and wired to the control
panel on the outside of the casing.
VALVE SET
Two or three way valves for ON/OFF operation, with pipe mounting kit and thermostatic actuator.
SkyStar
Main components

310
1,84
1,35
2,22
316
4,9
4,1
33
24
25
0,11
420
2,34
1,75
2,90
402
7,6
6,3
40
31
32
0,15
520
2,68
2,04
3,35
461
9,7
8,2
45
36
44
0,20
320
2,25
1,57
2,56
387
4,6
3,5
33
24
25
0,11
500
3,34
2,39
3,93
574
9,4
7,3
45
36
44
0,20
710
4,33
3,18
5,23
745
15,1
11,4
53
44
68
0,32
430
2,94
2,08
3,43
506
7,5
6,7
41
32
32
0,15
610
3,88
2,81
4,63
667
12,4
11,2
49
40
57
0,27
880
5,02
3,74
6,17
863
19,7
17,7
59
50
90
0,45
630
4,21
3,03
5,12
724
10,9
6,7
33
24
33
0,15
820
4,91
3,58
6,03
845
14,3
9,9
40
31
48
0,23
1140
6,16
4,59
7,77
1060
21,6
15,1
48
39
77
0,36
710
5,31
3,46
5,61
913
9,4
7,9
34
25
42
0,18
970
6,78
4,48
7,34
1166
14,7
12,4
40
31
63
0,28
1500
9,51
6,48
10,71
1636
26,9
23,0
53
44
120
0,53
710
5,31
3,71
6,13
913
9,4
7,9
34
25
42
0,18
1280
8,45
6,09
10,30
1453
21,8
18,6
48
39
95
0,42
1820
11,10
8,25
14,00
1909
35,6
30,6
58
49
170
0,74
310
1,27
1,01
1,62
219
4,5
4,0
33
24
25
0,11
420
1,63
1,32
2,12
280
7,0
6,0
40
31
32
0,15
610
1,98
1,64
2,64
340
10,0
9,0
49
40
57
0,27
123123123123123123123
1,4 3,0 4,02,1 2,1 4,00,8
820 x 820 x 303575 x 575 x 275
Speed
Air flow m3/h
Cooling total emission (E) kW
Cooling sensible emission (E) kW
Heating (E) kW
Water flow l/h
¨P Cooling (E) kPa
¨P Heating (E) kPa
Sound power Lw (E) dB(A)
Sound pressure Lp (*)dB(A)
W
A
Water content l
Dimensions mm
MODEL
Fan (E)
SK 12 SK 22 SK 32 SK 42 SK 52 SK 62SK 02
310
1,51
1,15
260
6,0
1,96
169
6,5
33
24
25
0,11
420
1,96
1,55
337
10,0
2,54
219
10,5
40
31
32
0,15
610
2,33
1,90
401
13,5
3,03
261
14,5
49
40
57
0,27
310
1,85
1,34
318
4,6
2,43
209
5,7
33
24
25
0,11
420
2,36
1,71
406
6,9
3,02
260
8,5
40
31
32
0,15
520
2,70
1,98
464
8,8
3,46
298
10,8
45
36
44
0,20
320
1,85
1,34
318
4,6
2,43
209
5,7
33
24
25
0,11
500
2,65
1,98
456
8,8
3,46
298
10,8
45
36
44
0,20
710
3,34
2,56
574
13,4
4,40
378
16,6
53
44
68
0,32
320
2,09
1,49
359
4,0
1,98
170
3,6
33
24
25
0,11
500
3,06
2,24
526
7,0
2,71
233
6,0
45
36
44
0,20
710
3,93
2,95
676
10,5
3,35
288
9,0
53
44
68
0,32
430
2,36
1,75
406
7,2
3,10
267
8,8
41
32
32
0,15
610
3,02
2,29
519
11,2
3,97
341
13,8
49
40
57
0,27
880
3,81
2,97
655
17,0
4,95
426
20,5
59
50
90
0,45
430
2,72
1,97
468
6,0
2,46
212
5,0
41
32
32
0,15
610
3,53
2,62
607
9,0
3,06
263
7,8
49
40
57
0,27
880
4,53
3,46
779
14,0
3,79
326
11,0
59
50
90
0,45
Speed
Air flow m3/h
Cooling total emission (E) kW
Cooling sensible emission (E) kW
Water flow l/h
¨P Cooling (E) kPa
Heating (E) kW
Water flow l/h
¨P Heating (E) kPa
Sound power Lw (E) dB(A)
Sound pressure Lp (*)dB(A)
W
A
Cooling water content l
Heating water content l
Dimensions mm
Fan (E)
123123123123123123
575 x 575 x 275
1,0
0,6
1,4
0,7
1,4
0,7
1,7
0,5
1,4
0,7
1,7
0,5
MODEL SK 04 SK 14 SK 24 SK 26 SK 34 SK 36
630
4,14
2,96
712
8,8
5,91
508
9,8
33
24
33
0,15
820
5,03
3,65
865
12,5
7,19
618
14,0
40
31
48
0,23
1140
6,34
4,69
1090
18,9
9,10
783
21,4
48
39
77
0,36
710
4,52
3,25
777
10,3
6,45
555
11,5
34
25
42
0,18
970
5,66
4,15
974
15,4
8,10
697
17,4
40
31
63
0,28
1500
7,71
5,83
1326
26,9
11,00
946
29,9
53
44
120
0,53
710
4,99
3,53
858
9,0
5,23
450
6,5
34
25
42
0,18
970
6,33
4,55
1089
14,0
6,42
552
9,2
40
31
63
0,28
1500
8,77
6,49
1508
25,0
8,56
736
15,3
53
44
120
0,53
710
4,52
3,25
777
10,3
6,45
555
11,5
34
25
42
0,18
1280
6,93
5,18
1192
22,1
9,98
858
25,3
48
39
95
0,42
1820
8,89
6,84
1529
34,7
12,70
1092
38,8
58
49
170
0,74
710
4,99
3,53
858
9,0
5,23
450
6,5
34
25
42
0,18
1280
7,84
5,73
1348
20,0
7,74
666
13,0
48
39
95
0,42
1820
10,20
7,68
1754
32,0
9,80
843
19,5
58
49
170
0,74
123123123123123
820 x 820 x 303
3,0
1,4
3,0
1,4
3,6
1,1
3,0
1,4
3,6
1,1
Speed
Air flow m3/h
Cooling total emission (E) kW
Cooling sensible emission (E) kW
Water flow l/h
¨P Cooling (E) kPa
Heating (E) kW
Water flow l/h
¨P Heating (E) kPa
Sound power Lw (E) dB(A)
Sound pressure Lp (*)dB(A)
W
A
Cooling water content l
Heating water content l
Dimensions mm
Fan (E)
MODEL SK 44 SK 54 SK 56 SK 64 SK 66
5
Technical features
EUROVENT Certification
www.eurovent-certification.com
www.certiflash.com
(E) = Eurovent certified performance. (*) = The sound pressure levels are 9 dB(A) lower than the sound power levels
and apply to the reverberant field of a 100 m3room and a reverberation time of 0.5 sec.
2 pipe units. The following standard rating conditions are used:
COOLING
Entering air temperature: + 27°C d.b., + 19°C w.b.
Water temperature: + 7/12°C
HEATING
Entering air temperature: + 20°C
Water temperature: + 50°C
water flow rate as for the cooling conditions
4 pipe units. The following standard rating conditions are used:
COOLING
Entering air temperature: + 27°C d.b., + 19°C w.b.
Water temperature: + 7/12°C
HEATING
Entering air temperature: + 20°C
Water temperature: + 70/60°C

386
310
237
482
417
356
787
593
412
903
702
520
1118
865
734
1683
1146
876
2015
1471
876
2,24
1,80
1,38
2,80
2,42
2,07
4,57
3,45
2,39
5,25
4,08
3,02
6,50
5,03
4,27
9,78
6,67
5,09
11,72
8,55
5,09
203
164
126
266
232
198
440
334
235
504
394
294
624
486
415
951
655
505
1132
834
505
2,37
1,91
1,46
3,10
2,69
2,31
5,12
3,89
2,73
5,86
4,58
3,42
7,26
5,65
4,82
11,06
7,62
5,87
13,17
9,70
5,87
298
239
183
377
327
279
619
467
326
709
552
410
878
681
578
1327
906
694
1586
1161
694
3,46
2,78
2,13
4,39
3,80
3,25
7,19
5,43
3,79
8,25
6,42
4,77
10,21
7,92
6,72
15,43
10,54
8,07
18,45
13,50
8,07
393
315
240
488
422
360
795
598
415
914
709
524
1130
874
741
1699
1155
882
2037
1484
882
4,56
3,66
2,80
5,68
4,91
4,19
9,25
6,96
4,83
10,63
8,25
6,10
13,14
10,16
8,61
19,76
13,43
10,25
23,68
17,26
10,25
488
391
298
599
513
441
972
730
505
1118
866
639
1383
1067
903
2071
1403
1068
2486
1807
1068
5,67
4,55
3,47
6,97
5,96
5,12
11,30
8,48
5,87
13,00
10,07
7,43
16,08
12,41
10,50
24,08
16,32
12,42
28,91
21,01
12,42
610
420
310
520
420
310
710
500
320
880
610
430
1140
820
630
1500
970
710
1820
1280
710
High
Med
Low
High
Med
Low
High
Med
Low
High
Med
Low
High
Med
Low
High
Med
Low
High
Med
Low
Model Speed Air
flow
EWT 45 - LWT 40°C EWT 50 - LWT 40°C EWT 60 - LWT 50°C EWT 70 - LWT 60°C EWT 80 - LWT 70°C
l/hm
3
/h kW l/h kW l/h kW l/h kW l/h kW
Water
flow Emission Water flow Emission Water flow Emission Water flow Emission Water flow Emission
SK 12
SK 22
SK 32
SK 42
SK 52
SK 62
SK 02
610
420
310
520
420
310
710
500
320
880
610
430
1140
820
630
1500
970
710
1820
1280
710
421
346
269
554
482
417
926
715
508
1049
835
633
1264
1003
858
1943
1374
1070
2277
1722
1070
2,45
2,01
1,57
3,22
2,80
2,42
5,38
4,15
2,95
6,10
4,85
3,68
7,35
5,83
4,99
11,30
7,99
6,22
13,24
10,01
6,22
1,83
1,48
1,14
2,22
1,91
1,64
3,64
2,77
1,94
4,17
3,26
2,44
5,00
3,92
3,32
7,59
5,27
4,06
9,01
6,68
4,06
340
280
219
462
403
317
745
575
387
863
667
506
1060
845
722
1635
1166
913
1909
1454
913
1,98
1,63
1,27
2,68
2,34
1,84
4,33
3,34
2,25
5,02
3,88
2,94
6,16
4,91
4,21
9,51
6,78
5,31
11,10
8,45
5,31
1,64
1,32
1,01
2,04
1,75
1,35
3,18
2,39
1,57
3,74
2,81
2,08
4,59
3,58
3,03
6,48
4,48
3,46
8,25
6,09
3,71
254
210
165
362
317
276
617
483
349
694
559
430
840
674
580
1301
939
740
1511
1162
740
1,47
1,22
0,96
2,10
1,84
1,61
3,59
2,81
2,03
4,03
3,25
2,50
4,88
3,92
3,37
7,57
5,46
4,30
8,78
6,75
4,30
1,45
1,16
0,89
1,75
1,50
1,29
2,87
2,18
1,53
3,29
2,57
1,92
3,95
3,09
2,62
5,99
4,15
3,20
7,11
5,27
3,20
199
160
123
252
220
188
420
319
225
479
376
283
573
453
384
880
612
434
1044
775
434
1,16
0,93
0,71
1,47
1,28
1,09
2,44
1,86
1,31
2,79
2,19
1,65
3,33
2,63
2,23
5,12
3,56
2,52
6,07
4,51
2,52
1,16
0,93
0,71
1,47
1,28
1,09
2,44
1,86
1,31
2,79
2,19
1,65
3,33
2,63
2,23
5,12
3,56
2,52
6,07
4,51
2,52
High
Med
Low
High
Med
Low
High
Med
Low
High
Med
Low
High
Med
Low
High
Med
Low
High
Med
Low
EWT 5 - LWT 10°C EWT 7 - LWT 12°C EWT 9 - LWT 14°C EWT 12 - LWT 17°C
Water
flow
Total
emission
Sensible
emission
Water
flow
Total
emission
Sensible
emission
Water
flow
Total
emission
Sensible
emission
Water
flow
Total
emission
Sensible
emission
Model Speed Air
flow
l/h kW kW l/h kW kW l/h kW kW l/h kW kWm3/h
SK 12
SK 22
SK 32
SK 42
SK 52
SK 62
SK 02
7/12 °C
10/15 °C
14/18 °C
K
K
K
0,9
0,72
0,5
0,94
0,78
0,58
1,06
0,9
0,72
7/12 °C
10/15 °C
14/18 °C
K
K
K
0,82
0,56
0,35
0,89
0,63
0,41
1,11
0,82
0,52
Water (°C) Air (°C) 25-18
26-18.5 28-20 Water (°C) Air (°C) 25-18 26-18.5 28-20
Total emission Sensible emission
6
SkyStar
Emission
Cooling emission of 1 battery units (2 pipe installation)
Entering air temperature: +27°C d.b. +19°C w.b.
Heating emission of 1 battery units (2 pipe installation)
Entering air temperature: +20°C
Note:
the correction
factors are indicative,
as they are
average values.
Emission correction factors for different working conditions.
Multiply the factors by the emission figures in the 7-12°C table above.

Model Speed Air
flow
EWT 45 - LWT 40°C EWT 50 - LWT 40°C EWT 60 - LWT 50°C EWT 70 - LWT 60°C EWT 80 - LWT 70°C
l/hm
3
/h kW l/h kW l/h kW l/h kW l/h kW
Water
flow Emission Water flow Emission Water flow Emission Water flow Emission Water flow Emission
256
215
166
283
247
196
351
277
196
402
317
247
771
609
501
929
686
547
1074
845
547
1,49
1,25
0,96
1,65
1,44
1,14
2,04
1,61
1,14
2,34
1,84
1,44
4,48
3,54
2,91
5,40
3,99
3,18
6,24
4,91
3,18
134
113
87
149
130
103
184
146
103
211
166
130
410
324
267
493
365
291
569
449
291
1,56
1,31
1,01
1,73
1,51
1,20
2,14
1,69
1,20
2,45
1,94
1,51
4,76
3,77
3,11
5,73
4,25
3,39
6,61
5,22
3,39
197
166
128
218
191
151
270
214
151
310
244
191
596
471
388
718
531
423
829
653
423
2,29
1,93
1,49
2,54
2,22
1,76
3,14
2,48
1,76
3,60
2,84
2,22
6,93
5,48
4,51
8,34
6,17
4,92
9,64
7,60
4,92
261
219
169
298
260
209
378
298
209
426
341
267
783
618
508
946
697
555
1092
858
555
3,03
2,54
1,96
3,46
3,02
2,43
4,40
3,46
2,43
4,95
3,97
3,10
9,10
7,19
5,91
11,00
8,10
6,45
12,70
9,98
6,45
325
272
210
358
312
247
444
350
247
510
401
312
970
766
629
1170
864
686
1353
1064
686
3,78
3,17
2,44
4,17
3,63
2,87
5,17
4,07
2,87
5,93
4,67
3,63
11,28
8,90
7,31
13,60
10,04
7,98
15,74
12,37
7,98
610
420
310
520
420
310
710
500
320
880
610
430
1140
820
630
1500
970
710
1820
1280
710
High
Med
Low
High
Med
Low
High
Med
Low
High
Med
Low
High
Med
Low
High
Med
Low
High
Med
Low
SK 14
SK 24
SK 34
SK 44
SK 54
SK 64
SK 04
High
Med
Low
High
Med
Low
High
Med
Low
High
Med
Low
High
Med
Low
High
Med
Low
High
Med
Low
490
410
314
569
465
398
718
569
398
791
632
510
1299
1027
842
1588
1158
920
1836
1423
920
2,85
2,38
1,82
3,31
2,71
2,31
4,18
3,31
2,31
4,60
3,67
2,97
7,55
5,97
4,89
9,23
6,73
5,35
10,67
8,27
5,35
2,12
1,73
1,29
2,26
1,83
1,55
2,91
2,26
1,55
3,23
2,53
2,01
5,12
4,00
3,24
6,35
4,53
3,56
7,43
5,64
3,56
401
337
260
465
405
318
574
455
318
656
520
405
1090
866
713
1327
974
778
1529
1191
778
2,33
1,96
1,51
2,70
2,36
1,85
3,34
2,65
1,85
3,81
3,02
2,36
6,34
5,03
4,14
7,71
5,66
4,52
8,89
6,93
4,52
1,90
1,55
1,15
1,98
1,70
1,34
2,56
1,98
1,34
2,97
2,29
1,75
4,69
3,65
2,96
5,83
4,15
3,25
6,84
5,18
3,25
307
260
201
374
309
267
467
374
267
512
413
337
864
691
572
1046
775
623
1199
942
623
1,78
1,51
1,17
2,18
1,80
1,55
2,72
2,18
1,55
2,98
2,40
1,96
5,02
4,02
3,33
6,08
4,50
3,62
6,97
5,48
3,62
1,69
1,37
1,02
1,79
1,44
1,22
2,30
1,79
1,22
2,56
2,00
1,59
4,04
3,15
2,56
5,02
3,57
2,81
5,98
4,46
2,81
239
196
148
260
210
177
330
260
177
366
288
231
586
462
374
7,26
524
411
849
646
411
1,39
1,14
0,86
1,51
1,22
1,03
1,92
1,51
1,03
2,13
1,67
1,35
3,41
2,68
2,17
4,22
3,05
2,39
4,94
3,75
2,39
1,39
1,14
0,86
1,51
1,22
1,03
1,92
1,51
1,03
2,13
1,67
1,35
3,41
2,68
2,17
4,22
3,05
2,39
4,94
3,75
2,39
610
420
310
520
420
310
710
500
320
880
610
430
1140
820
630
1500
970
710
1820
1280
710
EWT 5 - LWT 10°C EWT 7 - LWT 12°C EWT 9 - LWT 14°C EWT 12 - LWT 17°C
Water
flow
Total
emission
Sensible
emission
Water
flow
Total
emission
Sensible
emission
Water
flow
Total
emission
Sensible
emission
Water
flow
Total
emission
Sensible
emission
Model Speed Air
flow
l/h kW kW l/h kW kW l/h kW kW l/h kW kWm3/h
SK 14
SK 24
SK 34
SK 44
SK 54
SK 64
SK 04
7/12 °C
10/15 °C
14/18 °C
K
K
K
0,9
0,72
0,5
0,94
0,78
0,58
1,06
0,9
0,72
7/12 °C
10/15 °C
14/18 °C
K
K
K
0,82
0,56
0,35
0,89
0,63
0,41
1,11
0,82
0,52
Water (°C) Air (°C) 25-18
26-18.5 28-20 Water (°C) Air (°C) 25-18 26-18.5 28-20
Total emission Sensible emission
7
SkyStar
Emission of 4 pipe units
with standard cooling battery
Note:
the correction
factors are indicative,
as they are
average values.
Emission correction factors for different working conditions.
Multiply the factors by the emission figures in the 7-12°C table above.
Cooling emission of 2 battery units (4 pipe installation)
Entering air temperature: +27°C d.b. +19°C w.b.
Heating emission of 2 battery units (4 pipe installation)
Entering air temperature: +20°C

710
500
320
880
610
430
1500
970
710
1820
1280
710
279
226
165
315
255
205
720
541
441
824
651
441
1,62
1,32
0,96
1,83
1,48
1,19
4,18
3,14
2,56
4,79
3,79
2,56
139
113
83
156
127
103
493
365
291
569
449
291
1,61
1,32
0,97
1,82
1,48
1,20
4,33
3,27
2,67
6,61
5,22
3,39
213
173
127
241
195
157
554
416
340
633
501
340
2,48
2,01
1,47
2,80
2,27
1,83
6,44
4,84
3,95
7,36
5,83
3,95
288
233
170
326
263
212
736
552
450
843
666
450
3,35
2,71
1,98
3,79
3,06
2,46
8,56
6,42
5,23
9,80
7,74
5,23
363
294
214
411
332
266
919
689
561
1053
831
561
4,22
3,42
2,49
4,78
3,86
3,10
10,69
8,01
6,52
12,24
9,66
6,52
SK 26
High
Med
Low
SK 36
High
Med
Low
SK 56
High
Med
Low
SK 66
High
Med
Low
Model Speed Air
flow
EWT 45 - LWT 40°C EWT 50 - LWT 40°C EWT 60 - LWT 50°C EWT 70 - LWT 60°C EWT 80 - LWT 70°C
l/hm
3
/h kW l/h kW l/h kW l/h kW l/h kW
Water
flow Emission Water flow Emission Water flow Emission Water flow Emission Water flow Emission
710
500
320
880
610
430
1500
970
710
1820
1280
710
812
629
425
940
729
557
1804
1291
1012
2105
1607
1012
4,72
3,66
2,47
5,46
4,24
3,24
10,49
7,50
5,89
12,24
9,34
5,89
3,29
2,51
1,66
3,86
2,93
2,21
7,25
5,08
3,94
8,57
6,41
3,94
676
526
359
779
607
468
1508
1089
858
1754
1348
858
3,93
3,06
2,09
4,53
3,53
2,72
8,77
6,33
4,99
10,20
7,84
4,99
2,95
2,24
1,49
3,46
2,62
1,97
6,49
4,55
3,53
7,68
5,73
3,53
528
415
287
606
477
370
1189
867
689
1375
1066
689
3,07
2,41
1,67
3,52
2,77
2,15
6,91
5,04
4,00
7,99
6,20
4,00
2,60
1,97
1,31
3,05
2,31
1,73
5,72
4,00
3,10
6,77
5,05
3,10
378
288
192
442
337
256
836
587
459
987
739
459
2,20
1,67
1,12
2,57
1,96
1,49
4,86
3,41
2,67
5,74
4,30
2,67
2,20
1,67
1,12
2,57
1,96
1,49
4,86
3,41
2,67
5,74
4,30
2,67
SK 26
High
Med
Low
SK 36
High
Med
Low
SK 56
High
Med
Low
SK 66
High
Med
Low
EWT 5 - LWT 10°C EWT 7 - LWT 12°C EWT 9 - LWT 14°C EWT 12 - LWT 17°C
Water
flow
Total
emission
Sensible
emission
Water
flow
Total
emission
Sensible
emission
Water
flow
Total
emission
Sensible
emission
Water
flow
Total
emission
Sensible
emission
Model Speed Air
flow
l/h kW kW l/h kW kW l/h kW kW l/h kW kWm
3
/h
Cooling emission of 2 battery units (4 pipe installation)
Entering air temperature: +27°C d.b. +19°C w.b.
Heating emission of 2 battery units (4 pipe installation)
Entering air temperature: +20°C
7/12 °C
10/15 °C
14/18 °C
K
K
K
0,9
0,72
0,5
0,94
0,78
0,58
1,06
0,9
0,72
7/12 °C
10/15 °C
14/18 °C
K
K
K
0,82
0,56
0,35
0,89
0,63
0,41
1,11
0,82
0,52
Water (°C) Air (°C) 25-18
26-18.5 28-20 Water (°C) Air (°C) 25-18 26-18.5 28-20
Total emission Sensible emission
8
SkyStar
Emission of 4 pipe units
with enhanced cooling battery
Note:
the correction
factors are indicative,
as they are
average values.
Emission correction factors for different working conditions.
Multiply the factors by the emission figures in the 7-12°C table above.

°C
K
20
0,94
30
0,90
40
0,86
50
0,82
60
0,78
70
0,74
80
0,70
°C
K
40
1,14
50
1,08
60
1,02
70
0,96
80
0,90
°C
K
20
0,94
30
0,90
40
0,86
50
0,82
60
0,78
70
0,74
80
0,70
Water flow
Air flow
Supply
MAX. working pressure
8 bars
Suitable relative humidity
15 - 75%
Single phase 230V 50Hz
MIN. entering water temperature: + 5°C
MAX. entering water temperature: + 80°C
MIN. entering air temperature: 6°C
MAX. entering air temperature: 40°C
Installation MAX. height: See table on page 12
Pressure drop
for mean water temperature of 10°C,
for different temperatures multiply the pressure drop figure
by the K correction factors in the table.
Pressure drop
for mean water temperature of 65°C,
for different temperatures multiply the pressure drop figure
by the K correction factors in the table.
Working conditions
Pressure drop
for mean water temperature of 10°C,
for different temperatures multiply the pressure drop figure
by the K correction factors in the table.
Pressure drop
for cooling battery
Pressure drop
for heating battery
2 pipe installation
4 pipe installation
9
SkyStar
Water side pressure drop
Water flow (l/h)
Pressure drop (kPa)
Water flow (l/h)
Pressure drop (kPa)
Water flow (l/h)
Pressure drop (kPa)

790 350 750 150
ABCD
mm
30 24 63
kg kg
Weights
packed unit
Weights
unpacked unit
SK 02 - 12
SK 04 - 14
SK 22 - 24 - 26
SK 32 - 34 - 36
28 22
UNIT DIFFUSER
kg kg
Model Weights
packed unit
Weights
unpacked unit
Packed unit
Dimensions
MD - 600
METAL DIFFUSER
(RS receiver, Code 9066338,
for MD
- 600 metal diffuser
for MB units)
SK 02-04 / SK 12-14 / SK 22-24-26 / SK 32-34-36 (Version 600 x 600)
10
SkyStar
Dimensions and weights
2 pipe units
- 3. Flow,
heating/cooling 1/2”
- 4. Return,
heating/cooling 1/2”
4 pipe units
- 1. Flow, heating 1/2”
- 2. Return, heating 1/2”
- 3. Flow, cooling 1/2”
- 4. Return, cooling 1/2”

Packed unit
Dimensions
1050 400 1000 200
ABCD
mm
47 39 10 6
kg kg
Weights
packed unit
Weights
unpacked unit
SK 42
SK 44
SK 52 - 54 - 56
SK 62 - 64 - 66
44 36
UNIT DIFFUSER
kg kg
Model Weights
packed unit
Weights
unpacked unit
PACKED UNIT
SK 42-44 / SK 52-54-56 / SK 62-64-66 (Version 800 x 800)
11
SkyStar
Dimensions and weights
UNIT DIFFUSER
2 pipe units
- 3. Flow,
heating/cooling 3/4”
- 4. Return,
heating/cooling 3/4”
4 pipe units
- 1. Flow, heating 1/2”
- 2. Return, heating 1/2”
- 3. Flow, cooling 3/4”
- 4. Return, cooling 3/4”

Speed
Air throw Lm
123123123123123123
3,0 3,5 3,8 3,0 3,8 4,5 3,5 4,2 5,0 3,2 3,7 4,3 3,4 4,0 5,0 3,4 4,6 5,5
Model
SK 02-04-12-14 SK 22-24-26 SK 32-34-36 SK 42-44 SK 52-54-56 SK 62-64-66
123123123123123123
3,3
2,2
2,5
3,9
2,6
2,9
4,2
2,8
3,1
3,3
2,2
2,5
4,2
2,8
3,1
4,8
3,2
3,6
3,9
2,6
2,9
4,5
3,0
3,4
5,2
3,4
3,9
3,5
2,2
2,7
4,1
2,6
3,2
4,8
3,0
3,8
3,8
2,4
3,0
4,6
2,8
3,6
5,4
3,4
4,2
3,8
2,4
3,0
5,1
3,1
4,0
5,8
3,6
4,6
Speed
Air throw Lm
Height Hm
Distance Bm
Model
SK 02-04-12-14 SK 22-24-26 SK 32-34-36 SK 42-44 SK 52-54-56 SK 62-64-66
12
SkyStar
Air throw
The air throw indicated in the tables must only be considered the maximum value, as it may
change significantly in relation to the dimensions of the room in which the appliance is installed
and the positioning of the furniture in the room.
The useful throw Lrefers to the distance between the unit and the point where the air speed
is 0.2 m/sec; if the louver has a gradient of 30° (recommended in cooling mode), the so-called
“Coanda” effect will occur, illustrated in the first figure, while at a gradient of 45° (recommended
in heating mode), there will be a downwards throw, as illustrated in the second figure.
With adjustable
air diffusion louvers at 30°
With adjustable
air diffusion louvers at 45°
NOTE:
On heating it must be payed attention to rooms where the floor temperature
is particularly low (for example less than 5°C).
In this situation the floor can cool the lower layer of air to a level that stop
the uniform diffusion of the hot air coming from the unit,
decreasing the throw figures shown in the table.

13
SkyStar
Spigot
for air distribution
AIR OUTLET
AIR INTAKE
Two air outlets are provided
on the side of the unit for connection
to separate supply air outlets.
They can be used to supply air from
the fan coil unit to distant areas of a room
or even to a different room.
The total air flow does not change.
The air flow at high speed depending
on the air duct pressure drop is shown
in the tables below.
Note: all air ducts must be insulated
in order to avoid condensation.
Air distribution - Air distribution connection
No. used outlets = 1 No. used outlets = 2
Air flow (m3/h)
Air flow (m3/h)
Air flow (m3/h)
Air flow (m3/h)
Pressure drop (Pa)Pressure drop (Pa) Pressure drop (Pa)Pressure drop (Pa)
The cassette is fitted
with inlets for fresh air to be mixed
with return air inside the unit (Fig. 3).
The fresh air flow is limited to 20%
of the total fan coil air flow at medium speed
and 100 m3/h for each treated air inlet.
The units feature fresh air inlets
on three corners (no inlets on the fourth corner
because of the condensate pump inside the unit).
The fresh air inlets are designed for the insertion of standard 110 x 55 mm rectangular ducts.
The air duct is connected quickly and easily. After removing the blank and the insulation inside the unit,
the mounting plate is rolled back and the air duct with its V-shaped section
must be pushed into the unit (see Figures below). The duct is then fixed to the mounting plate.
Note: the fresh air must be filtered.
Accessory “Fresh air connection” - Identification CAP - Code 6078005 (see page 14)
FRESH AIR INLET
AIR INTAKE
Fresh
air connection
MAIN
AIR INLET
AIR INTAKE
1 2 3 4
Fresh air supply - Fresh air connection

Fresh air kit
This is used to introduce primary air into the environment directly through the diffuser. The kit includes a flow separator
to be fitted inside the cassette, and a circular fitting for connection to the flexible system ducting. The flow of air is sent
directly to just one of the outlet louvers, without passing through the coil. The
air flow of fresh air introduced
into the environment depend
on the inlet static pressure.
14
SkyStar
Accessories
PRT 800
SK 4-5-6
9079231
PRT 600
SK 0-1-2-3
9079230
IDENTIFICATION
MODEL
CODE
SK 0-1-2-3 SK 4-5-6
160
200
300
400
500
80
120
160
200
240
m3/hm3/h
3
8
15
25
36
3
8
15
25
36
PaPa
The diameter of the fitting
is 150 mm for SK 0 - 1 - 2 - 3
and 180 mm for SK 4 - 5 - 6.
The diameter of the fitting
is 150 mm for SK 0 - 1 - 2 - 3
and 180 mm for SK 4 - 5 - 6.
Units with remote electric board
On request the Skystar cassettes are available with electric control panel reachable from below and with the electric
board that can be placed in a remote position. In this case the units are supplied with an electronic connecting control
panel, fitted to the bottom side on the 4 smallest sizes and to the lateral side on the 3 biggest sizes.
The electronic control panel is connected to the fan motor, to the condensate pump and to the condensate level control.
A 6 m wire is also supplied with integral plug-in connections to
connect the unit with the remote electric board that can be installed
in a suitable and comfortable position, where the power and system
connections can be made easily.
This feature is not available for units with electric heater or infra-
red remote control.
Fresh air connection
See page 13.
Air distribution connection
See page 13.
IDENTIFICATION CODE
CAP 6078005
CDA 800 9079233
CDA 600 9079232
IDENTIFICATION CODE
Correlation between flow-rate / static pressure

Rated pressure:
Max. ambient temperature:
Max. water flow temperature:
Power:
Rating:
Protection:
Travel time:
Max. glycol content of water:
16 bar
50 °C
110 °C
230 V - 50/60 Hz
3 VA
IP 43
approx. 3 min.
50%
3 ways 2 ways
3 ways 2 ways
15
SkyStar
Accessories
Valve set, 2 or 3 ways, ON-OFF, with thermoelectric actuator.
The set includes connection pipes.
Note: The main battery lockshield valve connection
is 1/2” female (Kvs 2) for SK0 - SK1 - SK2 - SK3 sizes
and 3/4” female (Kvs 3,5) for SK4 - SK5 - SK6 sizes,
the auxiliary battery valve connection is 1/2” female (Kvs 2).
Note: The maximum pressure drop accross
the fully open valve should not exceed 25 kPa
for cooling operation and 15 kPa for heating operation.
Technical data: Valves characteristics
Valves pressure drop
Water
flow (l/h)
Δp - kPa
*
maximum pressure difference for valve to close
**
external thread, flat seal
Note: 3 way valves with simplified kit and 1” connection have conical seal.
Battery
type
Main
Model
Auxiliary
02-12-22-32
04-14-24-26-34-36
42-52-62
44-54-56-64-66
04-14-24-26-34-36
44-54-56-64-66
2 way valves 3 way valves
K
vs
m
3
/h
¨p
max
kPa *
Valve **
connection
K
vs
m
3
/h
¨p
max
kPa *
Valve **
connection
2,8
5,2
2,8
50
60
50
3/4"
1"
3/4"
2,5
4,5
2,5
50
50
50
3/4"
1"
3/4"
ON-OFF valves with thermoelectric actuator
VALVE WITH MICROMETRIC LOCKSHIELD VALVE
VALVE WITH SIMPLIFIED KIT

Cassette SkyStar can be equipped with the innovative
plate type electrostatic filter, Crystall,combining air
treatment and purifying in a single product.
The electronic filter is patented and certified according
to Standard UNI 11254.
Introduction
16
SkyStar
Dimensions
SK 0 / 1 / 2 / 3
(Model 600 x 600)
SK 4 / 5 / 6
(Model 800 x 800)
CRYSTALL

When the polluted air goes through the
mechanical pre-filter the particles *50 μ are
eliminated (powder, insects, etc).
Then the smallest particles (50 ÷ 0.01 μm) are
exposed to an intensive ionizing field and are polarized (Phase 1).
The charged particles passing through the second filter section, are
pushed back by the anode and attracted to the collection surfaces
by a strong, induced magnetic field (Phase 2).
The air which leaves the unit is free from polluting particles.
INLET
OF POLLUTED AIR
OUTLET
OF CLEAN AIR
PHASE
2
PHASE
1
Air without
particles < 1 μm
Air without
particles ≥50 μm
Pre-filter
Electrostatic
filter
Collection
surface
Inducted
anode
Polarized
electrode
Ionic field
Elimination
of the biggest
particles
h
o
u
μm
El t t ti
h
a
Ai
r w
i
t
h
p
art
i
c
l
es < 1
he
a
re
Operating principle
of the electrostatic filter
The expression Indoor Air Quality (IAQ) covers all the procedures and methodologies used to improve the
quality of the air we breathe in the places where we live and work, from all points of view, from temperature
to cleanliness, to relative humidity, etc. (EN 15251 and EN 13779). Thanks to its new patented electronic filter,
the Crystall electrostatic filter totally eliminates the pollutants present in the air, including tobacco smoke,
dust (PM10, PM2.5), fibres, microbiological substances such as bacteria, fungi, etc., which are harmful to human
health (source: OMS 2009). Purifying the air means not only greater well-being, but also energy saving, as the
fresh air changes that are required to restore ideal climatic conditions and that entail greater consumption, are
significantly reduced (it is sufficient to enter the quantity of air required to restore the optimum level of CO2- source:
EN 1379:2008). Moreover, according to the UNI 10339rev, air recirculated by the Crystall appliance can be
considered as fresh air, to be added to the minimum requirements (0,5 ls/m2). Purifying the air with the Sabiana
Crystall appliance also entails no reduction of living room space, as the dimensions of the fan convector
are practically unchanged (just 3 cm higher). The positioning of the electronic filter allows simple and effective
maintenance and, as it is easy to wash, its working life is practically unlimited. The modularity of the filter
components and their ease of mounting make the system extremely competitive in terms of cost compared
with other types of filters present on the market. In spring and autumn, if air conditioning/heating is not required,
the appliance acts simply as an air purifier.
Indoor air quality (IAQ)
THE AMBIENT CONDITION IS ACCEPTABLE WHEN:
• Microclimatic parameters are normal
• 80% of people are satisfied by the quality of air
• Specific internal contaminants are not in harmful concentrations
“Guidelines for the protection and promotion of health in confined areas O.G.
No. 276 dated 27 Nov 01 ordinary supplement no. 252”
The method for obtaining the air quality required in confined areas and thus succeeding in ensuring that the
contaminants present are in concentrations less than those considered dangerous to health are:
Prescriptive approach: ventilation of the internal area using only properly filtered fresh air, in the quantity
and quality needed to dilute the internal contaminants in order to reach the required
maximum acceptable concentration values (see WHO limits).
Performance approach:
ventilation with fresh air and recirculated air from the same area, both properly filtered,
in the quantity and quality needed to dilute the internal contaminants in order to reach
the required maximum acceptable concentration values (see WHO limits).
Standards and legislation
17
SkyStar
CRYSTALL

High
Medium
Low
not classified
(l.s. per person) + (l.s. per m2)
(l.s. per person) + (l.s. per m2)
(l.s. per person) + (l.s. per m2)
not classified
Total fresh air volume varies
based on the intended use
of the confined area
UNI EN 13779:2008
IDA 1
IDA 2
IDA 3
IDA 4
> 15
10 −15
6 −10
< 6
20
12,5
8
5
PRESCRIPTIVE METHOD
CATEGORY TIPICAL RANGE DEFAULT VALUE
RATE OF FRESH AIR
l.s. person
l.s. person
l.s. person
l.s. person
UNIT
UNI EN 10339REV
RATE OF FRESH AIRCATEGORY
WHO publicized values
and legislative acts expressed
in μg/m3, PPM, etc.
5 - 6
The volume of air to be considered
is based on the internal production
and the imposed concentration limits
in the confined area
Concentration
Limit
Minimum fresh air
l.s. person
Quantity of recirculated air
provided that it is filtered like fresh air
PERFORMANCE METHOD
UNI EN 13779:2008
IDENTIFICATION AND QUANTIFICATION OF THE REFERENCE POLLUTANT (PM OR GAS)
WHO publicized values
and legislative acts expressed
in μg/m3, PPM, etc.
The minimum volume of air input
varies based on
the intended use
of the confined area
The volume of air to be considered
is based on the internal production
and the imposed concentration limits
in the confined area
Concentration
Limit
Minimum fresh air
l.s. person
Quantity of recirculated air
provided that it is filtered like fresh air
UNI EN 10339REV
IDENTIFICATION AND QUANTIFICATION OF THE REFERENCE POLLUTANT (PM OR GAS)
18
SkyStar
CRYSTALL
UNI EN 13779:2008 and UNI 10339rev Standards
The example reproduced at the bottom of the page shows how, with adequate air filtering, it is possible to
decrease considerably the quantity of fresh air to be brought into the environment (up to 3-4 times less); the
thermal energy dissipated due to ventilation is in fact in direct proportion to the number of air changes, as
indicated in the following equation:
Qv = ΔT · R · D · C · Vol.
3600
Qv = Thermal energy lost for ventilation - Watt
ΔT= Indoor-Outdoor difference (T) - °C
R= A.C.H.
D= Air density - Kg/m3
C= Specific air heat - J/Kg-°C
Vol = Room size - m3
Fresh air flow rates according to the performance approach
The quantity and quality of recirculated air and outdoor air to be added is better specified in the prescriptive and
performance approach in Standards UNI EN 13779:2008 and soon to be released UNI 10339rev according to
the following simplified tables.

The Crystall electrostatic filtering system consists of two parts: the first is a plate type electronic
active filter and is fitted in the return air section of the cassette, while the second is an electronic
control and regulation board, fixed on the structure.
All electrical connections are made during production. The installation of the SkyStar Sabiana
cassette fan coil unit incorporating the Crystall electronic filter is therefore similar to that of a
normal unit: the only difference is the installation height, for which the filter dimensions must
taken into account.
Crystall filters are not suitable for ECM and electric heater versions.
Active plate type electronic filter
The filtering element consists of two sections:
the first consists of electrodes and insulating
elements, forming a self-supporting ionising
frame, while the second consists of special
light aluminium fins (collector).
The two sections are installed above the return air
grille to make the extraction and maintenance
of the filter easier.
Accessibility to sections to be cleaned is ensured
by easy-open plastic closures.
The collector can be cleaned by washing with
water and ordinary detergents or steam jets
(please consult the maintenance manual for
further details).
Electronic board
Controls and regulates all functions of the
electrostatic filter.
It is appropriately protected against any operating
defects of the electrostatic filter. It supplies a
constant voltage to the electrodes when the mains
supply voltage varies (± 15%).
The supply transformer is constructed with its
primary and secondary coils physically separated
and wound onto separate cores.
The energy consumption of the filter group is
25 W (to which the electrical consumption of the
Cassette must be added).
Control and regulation commands
Units with Crystall electrostatic filter can be
controlled and regulated by the series of IAQ
controls that are already provided for CRC
Carisma fan coils.
Construction features
19
SkyStar
CRYSTALL
1 - Diffuser with return air grid
2 - Active plate type electrostatic filter
3 - Plastic opening
4 - Insulation
5 - Filter containment frame
6 - Electronic board
7 - Cassette

Dimensions: 133x93x37 mm
Dimensions: 133x93x37 mm
Dimensions: 133x93x37 mm
20
Wall electronic controls
If using the Skystar Cassette fan coils with electronic controllers,
the voltage values at the autotransformer terminals
must be kept in consideration (transformer return voltages).
These values may reach 500 Vac.
• ON-OFF switch.
• Manual 3 speed switch.
• Manual Summer/Winter switch.
• Electronic room thermostat for fan control (ON-OFF).
• Electronic room thermostat for valve control (ON-OFF) (the fan keeps working).
• It allows to control the low temperature cut-out thermostat (TME).
• It allows to control the chilled water valve (ON-OFF) and the electric heater in the SK-E version.
•
It allows to control the summer/winter cycle with a centralized and remote switch or with an automatic
change-over fitted on the water pipe (for 2-tube installations only).The latter case needs the adjustment
of the jumper on the control board (see the instruction leaflet supplied with the control).
IDENTIFICATION CODE
TMO-T 9060161
• Manual 3 speed switch.
• Without thermostatic control.
• It can not control the valves.
IDENTIFICATION CODE
MO-3V 9060160
• ON-OFF switch.
• Manual 3 speed switch.
• Manual Summer/Winter switch.
• Electronic room thermostat for fan control (ON-OFF).
• Electronic room thermostat for valve control (ON-OFF) (the fan keeps working).
• It allows to control the low temperature cut-out thermostat (TMM).
• It allows to control the chilled water valve (ON-OFF) and the electric heater in the SK-E version.
IDENTIFICATION CODE
CR-T 9066330