Sabrent DS-RICA User manual

SABRENT USB 3.0 Docking Station
Attach peripheral devices to your desktop, notebook or
tablet simultaneously via USB 3.0 cable almost
effortlessly.
Getting Started / Initial Setup
WINDOWS OS:

1. Connect the power cord to the power jack on the Docking Station.
2. Plug the other end of the power cord to a power outlet.

Note: At This point you can utilize your Docking Station as a
standalone charging station by attaching devices to one of the
charging ports.
3. Included is a 3.0 data cable that needs to be attached to the USB 3.0
type B female port on the Docking Stations.

4. Connect the other end of the 3.0 cable to an available USB port on
your PC or tablet.
Note: You can attach the Docking Station to available 2.0 ports
however for best performance use 3.0.
Note: Docking Station is plug & play although we do strongly
recommend installing the latest display drivers by visiting
http://displaylink.com/support/downloads.php
5. Allow up to 5 minutes for the plug & play feature to finish.

6. USB data ports should now be ready to use.
Note: 3.0 ports are labeled in blue.
7. Attach your sound devices to the sound card on the Docking Station
with ease.
Note: You might need to disable your onboard sound card or set
USB audio to default on your sound settings.

8. Connect Ethernet cable coming from your router or modem to the
network port on the Docking Station for a Wired Network Connection.
Note: If issues arise, you should try powering off your router and
modem for 30 seconds then powering them back up with network
cable connected to the Docking Station.
9. Add addition monitors by attaching them to a video port on the
Docking Station.
Note: Displays should automatically set up when connected.
For a custom display features please visit your Display settings.

MAC OS:
1. Please follow steps 1-4 on Windows OS Initial Setup.
2. You will have to install the driver from the disk or by visiting
http://displaylink.com/support/downloads.php
3. Go through the setup, once finished restart your computer.
4. Refer to steps 6-9 on Windows OS Initial Setup.