Sachtler S2080-0010 User manual

User Guide
Pedestal Adaptor Cl, Clll
EN
S2080-0010 Adaptor Ped CI / CIII aktiv 75 mm
S2080-0011 Adaptor Ped CI / CIII aktiv 100 mm
www.sachtler.com
Pedestal Adaptor Cl, Clll
aktiv Head 75 mm / 100 mm

2
Caution! Please refer to your uid head and pedestal user guides for full safety
instructions.
!
WARNING! Where this symbol appears, a potential pinch point exists, where injury to
ngers or hands is possible, exercise caution.
Box Contents .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .3
Attach aktiv 75 mm / 100 mm to Clll Pedestal .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .4
Attach aktiv 75 mm / 100 mm to Cl Pedestal .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .6
Contents

3
Box Contents
S2080-0010
S2080-0011
Adaptor Ped CI / CIII aktiv 75 mm Adaptor Ped CI / CIII aktiv 100 mm

4
Part No. S2080-0010 (75 mm) S2080-0011 (100 mm)
Attach aktiv 75 mm / 100 mm to Clll Pedestal
aktiv 75 S2080-0003
aktiv 100 S2080-0004
2.5mm
4
1. Fix the adaptor & head to the Clll using the
3 x screws (D091205501 M5*50) supplied
with the Clll pedestal. Check the adaptor is
rmly attached to the pedestal.
2. Firmly screw the slider adaptor to the
centre hole of the pedestal.

5
3. Lift the SpeedLevel Lever as shown all the
way to the top. Lower the head onto the
bowl connector and release the
SpeedLevel lever.
Check the head is rmly attached to the
pedestal.
4. CAUTION! Push the SpeedLevel Lever
fully closed against the head body before
use.

6
Attach aktiv 75 mm / 100 mm to Cl Pedestal
2.5mm
4
aktiv 75 S2080-0003
aktiv 100 S2080-0004
1. Fix the adaptor & head to the Cl using the
3 x screws (D091205351 M5*35) supplied
with the Cl Pedestal. Check the adaptor is
rmly attached to the Pedestal.
2. Firmly screw the slider adaptor to the
centre hole of the pedestal.

7
3. Lift the SpeedLevel Lever as shown all the
way to the top. Lower the head onto the
bowl connector and release the
SpeedLevel lever.
CAUTION! Push the SpeedLevel Lever
fully closed against the head body before use.
CAUTION! Check the head is rmly attached to
the pedestal.

Publication Part No. S2080-4985/A
www.sachtler.com
Copyright © 2021
All rights reserved.
Original Instructions: English
Published by:
Vitec Production Solutions Ltd
Email: [email protected]