SACKit TOUCHit S User manual

1
TOUCHit S
2020 User manual
UK
DK
DE

2
CONTENT
Thank you! ......................... 3
Quick Start Guide .................. 4
Product overview .................. 4
Product functionality............... 5
The Device ......................... 6
Product setup ...................... 8
Troubleshooting ................... 9
Cleaning of the product ............ 10
Technical specifications ............ 10
Important safety information ...... 11
Disposal of the product ............ 12
Complaints ......................... 12
Tak!................................. 13
Quick Start Guide .................. 14
Produkt overblik ................... 14
Produkt funktioner................. 15
Beskrivelse af produktet ........... 16
Produkt opsætning................. 18
Troubleshooting ................... 19
Rengøring af produktet ............ 20
Tekniske specifikationer ........... 20
Vigtig sikkerhedsinformation ...... 21
Bortskaffelse af produktet ......... 22
Reklamationer...................... 22
Vielen dank! ........................ 23
Kurzanleitung ...................... 24
Produktübersicht .................. 24
Funktionen ......................... 25
Produktbeschreibung .............. 26
Produkteinstellung................. 28
Fehlersuche ........................ 29
Reinigung........................... 30
Produktangaben ................... 30
Entsorgung......................... 32
Reklamation ........................ 32

3
THANK YOU!
Thank you for purchasing the TOUCHit S Bluetooth & Active Noise Cancellation headphone from
SACKit. Please read the entire instruction manual before using the product and save it for future
reference. We reserve the right to change or update information and to correct errors, inaccuracies,
or missions in text, images, and technical data. If you have any questions regarding technical
problems please contact our customer services. We hope you will enjoy your new TOUCHit S
headphones.
Let SACKit rock your life!
CONGRATULATIONS on your new SACKit product!
Register your new SACKit product and get cool benefits.
1. Go to https://sackit.eu/reg
2. Enter name, e-mail, and product*
Box contents
1. TOUCHit S headphone
2. Fabric travel pouch
3. 3.5mm audio cable
4. USB charging cable
5. Quick start guide
*When you register your product, you agree to receive email newsletters from SACKit.

4
QUICK START GUIDE
When you first get your TOUCHit S headphones you need to charge them before they are ready for
use. TOUCHit S is charged by using the included USB cable.
Charge TOUCHit S for 4 hours minimum before using the product the first time.
Please turn off your headphones after use to prolong battery life.
PRODUCT OVERVIEW
3. 3.5mm AUX
2. Active Noise
Cancelation (ANC)
5. Volume up
5. Volume down
6. X Button
8. Charging Port
4. Headband
1. Double Doughnut
design
7. Power Indicator

5
PRODUCT FUNCTIONALITY
Here follows a description of all the products features. Please use the Overview in the beginning of
this user manual to locate them on the TOUCHit S (page 4).
1. Double doughnut design
• The double doughnut ear cushions ensure both comfort and sound quality by directing sound at
you and encapsulates the whole sound without being uncomfortable to wear for a longer time.
2. Active Noise Cancelation (ANC)
• Press the Active noise cancellation button to activate ANC
• With ANC activated you can minimize background noise to further enjoy your music
3. 3.5mm AUX
• 3.5 mm AUX jack connection to connect the headset to a device without Bluetooth
• In-line use is possible when the battery is empty
4. Headband
• Adjustable headband to ensure a comfortable t for everyone
5. Volume up/down
• Volume buttons used to adjust the volume of TOUCHit S
• Also used to skip to next or previous song
6. X Button
• Master function button
• Used to power TOUCHit S on and off
• Plays and pause music when the headset is in Bluetooth mode
• Accepts and rejects incoming calls
7. Power indicator
• Indicates when TOUCHit S is turned on and off
• Flashes when TOCHit is in Bluetooth pairing mode
8. Charging port
• Charging port for the included USB charging cable

6
How to pair TOUCHit S and your device
1. For rst use: Long press the X Button for 10 seconds. After the rst 5 seconds, you will hear the
ON sound. Keep pressing the button for another 5 seconds to turn on pairing mode, indicated by
ashing the power indicator red and blue
2. Switch on Bluetooth on your device
3. Choose “TOUCHit S” under Bluetooth settings on your device. Your headphones are now con-
nected with your device
4. Start playing music on your device
5. Long press the X button to turn off your TOUCHit S headphones
6. TOUCHit S will automatically pair with the last connected device
To connect to a new device make sure that the previous connected device is disconnected otherwise
connecting opportunity won’t appear on the new device.
THE DEVICE
How to use the Active Noise Cancellation function
1. Push the ANC button on the left ear cup turning on the green LED light and you can enjoy the
headphones in Active Noise Cancellation mode
2. When you don’t need the Active Noise Cancellation function, turn the ANC function of by pus-
hing the ANC button
3. Active Noice Cancellation can be activated and deactivated even when the TOUCHit S Head-
phone is turned off. The Active Noise Cancellation will also remain on even when you turn the
TOUCHit S Headphone off.
Operation instructions for use after first pairing
1. After rst time pairing your TOUCHit S headphones and
2. Bluetooth device will automatically reconnect, the LED light will blink blue once TOUCHit S is
successfully paired.
3. Turn the headphones on by holding down the X button until you hear the ON sound
4. Long press X button to turn off TOUCHit S
Note: If the pairing is not successful, please turn the headphone off and back on and retry pairing.
Operation instructions for in-line use
Use the 3.5mm audio cable when you do not wish to use Bluetooth connection or when the battery
needs recharging. In-line use is possible when the battery is empty.
For in-line use:
• Connect the 3.5mm plug into your TOUCHit S Headphone 3.5mm jack, then connect the other
3.5mm plug to your device 3.5mm jack
• Adjust the volume using the controls on your mobile phone
• Enjoy the music

7
Battery information
• Battery: rechargeable Polymer Lithium-Ion Battery, DC: 3.7V/500mAh
• Power: USB DC5V, Please use the USB cable sealed with our headphone for charging
• Charging Time: For rst time use please be sure the battery has been charged fully before use. It
needs more than 4 hours of charging the rst time, then 2-3 hours for recharging
• When the red light is on, the headphone is in charge mode. The red light will turn off when the
battery is fully charged.

8
Making calls with TOUCHit S
When TOUCHit S connected to your device, you can answer and take calls through the headphones
wirelessly.
Functions Status of headphone Operation
Redial Last number Standby mode Short press X button twice
quickly
Volume up Conversation mode Short press Volume + button
Volume down Conversation mode Short press Volume - button
Answering calling Ringing Short press X button
End call Conversation mode Short press X button
Reject calling Ringing Press and hold X button for
one second until you hear
indication sound
Transfer the calling between
headset and Bluetooth
devices
Conversation mode Press and hold the X button
for 3 seconds can transfer
the conversation from
headset to mobile phone.
Then press and hold the
X button for 3 seconds to
transfer the conversation
back from mobile phone to
headphone.
Note: Not all the mobile phones support all the functions listed above. Please refer to the instruction
of your device. Some functions and indication tones may vary with depending on the device.
PRODUCT SETUP
Here follows a description of the setup of the product. A detailed description of the button’s and
functionality can be found at pages 4 to 5.
Playing Music with TOUCHit S
When TOUCHit S connects with the mobile phone or Bluetooth transmitter, you can enjoy music
through the headphone wirelessly.
Functions Status of headphone Operation
Pause Playing music Short Press X button
Play Pausing Short Press X button
Next track Playing music Short press volume+ button
Previous track Playing music Short press volume–button
Volume up Playing music Long press Volume + button
Volume down Playing music Long press Volume - button

9
TROUBLESHOOTING
If you have trouble using your TOUCHit S we ask you to try the following solutions. If these solutions
does not x your problem please contact our customer service at [email protected].
I experience issues with stability and connection
• Try to delete the pairing between TOUCHit S and your device on the device. You do this by
accessing the Bluetooth settings on your device and choose “forget TOUCHit S”. Now pair
TOUCHit S and your device by following the description found on 6
TOUCHit S is not playing music while connected to my device
• Please check volume on your audio device to make sure it is outputting sound
• If you use in-line please make sure that the 3.5mm plug is fully inserted into your audio device
and headset. And please make sure the headphone plug and audio device’s jack sticks are clean
• If TOUCHit S is used wirelessly and still is not playing music, you manually have to choose to play
from TOUCHit S in your device settings. Please refer to the instruction of your device or specic
app for further information
I’m hearing a beep-sound in my headset
• When TOUCHit S makes a beep-sound, they need recharging. Please charge your headphones
fully
I don’t feel like TOUCHit S is comfortable to wear
• Please adjust the length headband by pull/pushing the earcups to adjust to headset for a
comfortable t
I can’t turn on my headset
• Please recharge your headset by leaving the headset in the charger for minimum 4 hours

10
CLEANING OF THE PRODUCT
1. Kindly switch off TOUCHit S before you clean your headset and remove it from the power supply
2. Do not use any chemicals to clean the product. If you need to clean the headset, please use a soft
cloth with a mild cleaner
3. During cleaning please be aware to avoid water in the USB port, speakers, microphone, and but-
tons. Large amounts of water and uids may damage the headset
4. Use a soft, dry, and lint-free cloth to gently clean the speaker fabric.
NOTE: Avoid using sharp objects to clean TOUCHit S earbuds and charging case
TECHNICAL SPECIFICATIONS
• Model: TOUCHit S Bluetooth and ANC headphones
• Bluetooth version: V5.0
• Operating distance: 10M
• Battery: 500mAh
• Charging time: 3 hours
• Charging current: 220mA
• Music playing time:
25 hours (bluetooth on, ANC off)
18 hours (Bluetooth on, ANC on)
• Call time: 25 hours
• ANC solution: MAX
• Noise reduction performance: up to 22dB
• Driver Unit: Ø40mm
• Frequency Range: 20Hz-20KHz
• Impedence:ANC_OFF:80Ω ANC_ON :110Ω
• Size: 42*175*197mm
• Weight: 197g

11
IMPORTANT SAFETY INFORMATION
Please read the following information and operate the product and accessories accordingly to ensure
correct and safe use of the product. We are not responsible for damage caused by failure to comply
with the instructions or irresponsible use of the product.
Warning
To prevent any res or electrical hazards please act according to the following guidelines:
• Do not disassemble or replace any parts of this device. Please contact professional maintenance
or qualied service center if there is any damage to the device.
• Do not place in any liquid
• If any liquids ows inside the product, please shut down the product and contact customer
service center
• Do not place this device in or close to sources of excessive heat or re. (Such as: candles,
replaces or direct sunlight)
• Please shut down in lightning weather
• Keep this device away from any dust and vibration.
• Do not use excessive force when using any of the control buttons.
• If the product is below 5°C when you receive it, please open the product packaging and wait for it
to reach room temperature.
• To prevent overheating of the product is it necessary to keep a cleared area of 10 cm around the
product while charging
• Be sure to place this device on stable, at and level surfaces while charging.

12
DISPOSAL OF THE PRODUCT
TOUCHit S is made from recyclable and high quality materials. Do not dispose of together with living
garbage. Please understand the local classication about collecting electronical, electrical products
that contains batteries. Correct disposal of the product will help to prevent negative impact to the
environment.
COMPLAINTS
Please contact our customer service if you have a complaint or a broken TOUCHit S headset. If your
headset has a defect, please inform your serial number, when you contact us.

13
TAK!
Tak fordi du valgte TOUCHit S Headphone med Bluetooth og Active Noice Cancellation fra SACKit.
Vi beder dig læse hele denne brugermanual grundigt, før du tager TOUCHit S i brug. Gem venligst
brugermanualen, så du altid kan slå op i den. Vi tager forbehold for fejl i tekst eller billeder og nød-
vendige ændringer i de tekniske specikationer. Hvis du oplever tekniske problemer, beder vi dig
kontakte vores kundeservice. Vi håber, du får stor glæde af din nye TOUCHit S Headphone.
Let SACKit rock your life!
TILLYKKE med dit nye SACKit produkt!
Registrer dit nye SACKit produkt og få fede fordele.
1. Gå til https://sackit.eu/reg
2. Indtast navn, e-mail og produkt*
Indhold i æsken
1. TOUCHit S headset
2. TOUCHit S opbevarings pose
3. 3.5 mm jack kabel
4. USB-opladnings kabel
5. Quick start guide
*Når du registrerer dit produkt, giver du samtykke til at modtage nyhedsbreve fra SACKit.

14
QUICK START GUIDE
Når du modtager dine TOUCHit S headphones skal de oplades før de er klar til brug. TOUCHit S skal
oplades hvem hjælp af usb kablet inkluderet i pakken
TOUCHit S skal oplades i minimum 4 timer før debrug.
Huske at slukke for TOUCHit S efter brug for at forlænge batteriets levetid
PRODUKT OVERBLIK
3. 3.5mm AUX
2. Active Noise
Cancelation (ANC)
5. Volume up
5. Volume down
6. X Button
8. Charging Port
4. Headband
1. Double Doughnut
design
7. Power Indicator

15
PRODUKT FUNKTIONER
Herunder følger en beskrivelse af knapper og alle produktets funktioner, knappens nummer henviser
til produktoverblikket præsenteret på side 4.
1. Double doughnut design
• Det specielle design af ørepuderne sikrer komfort, lydkvalitet og mindre støj fra omverdenen uden
at gå på kompromis med lydkvaliteten
2. Active Noise Cancelation (ANC))
• Tryk på Active Noise Cancellation knappen aktiverer ANC
• Når ANC er aktiveret, kan du minimere baggrundsstøj så du kan nyde din musik endnu mere
3. 3.5mm AUX
• 3.5 mm AUX jack indgang. Bruges til at tilslutte headsetet enheder uden Bluetooth
• In-line brug kan også benyttes hvis TOUCHit S er løbet tør for strøm
4. Headband
• Justerbart headband som sikre en behagelig pasform til alle
5. Volume up/down
• Volume knapperne bruges til at justerer TOUCHit S’s afspilnings volumen
• Bruges også til at skifte til næste eller forrige sang
6. X ButtonMaster function knap
• Tænder og slukker TOUCHit S
• I Bluetooth mode kan knappen bruges til at pause/afspille musik
• Kan bruges til at accepterer eller afvise indgående opkald
7. LED Charging Indicator
• Tænder når TOUCHit S oplader
8. Charging port
• USB-indgang for opladningskablet

16
How to pair TOUCHit S and your device
1. Til første brug: Hold X knappen i bund i 10 sekunder. Efter de første 5 sekunder hører du TÆND
lyden. Bliv ved med at holde knappen i bund i endnu 5 sekunder for at sætte TOUCHit S i pairing
tilstand, som indikeres ved blinkende rød og blå LED lys
2. Tænd for Bluetooth på din enhed
3. Vælg “TOUCHit S” under Bluetooth indstillinger på din enhed. Dine headset er nu tilkoblet din
enhed
4. Du kan nu starte musikken på din enhed
5. Hold X knappen i bund for at slukke TOUCHit S igen
6. TPICHit vil automatisk parre med sidst tilkoblede enhed
For at tilslutte TOUCHit S til en ny enhed skal du sikre dig at din tidligere enheder er disconnected og
har slukket Bluetooth, ellers er headsetet ikke søgbart
BESKRIVELSE AF PRODUKTET
Sådan bruges Active Noise Cancellation funktionen
1. Tryk på ANC-knappen for at aktivere Active Noise Cancellation. Når ANC er slået til, lyser LED’en
grønt og du kan nu nyde dit headset i Active Noise Cancellation mode
2. Når du ikke har behov for at benytte denne funktion, slukker du for ANC ved at trykke på
ANC-knappen
3. Det er muligt at aktivere og deaktivere Active Noice Cancellation selv når TOUCHit S headpho-
ne er slukket. Active Noice Cancellation forbliver også tændt selv når du slukker din TOUCHit S
headphone
Betjeningsvejledning efter første tilslutning
1. Efter successesfuld tilslutning vil TOUCHit S og din Bluetooth enhed automatisk være forbundet
2. Tænd TOUCHit S ved at holde X knappen i bund indtil du hører TÆND lyden
3. Hold X knappen i bund for at slukke TOUCHit S
4. LED lyset vil blinke blåt, når TOUCHit S er tilsluttet korrekt
Bemærk: Hvis du har problemer med at oprette forbindelse, sluk da venligst TOUCHit S og prøv at
tilslutte igen.
Betjeningsvejledning til afspilning via kabel
Anvend det vedlagte jack kabel, når du ikke ønsker at benytte den trådløse Bluetooth forbindelse
eller når batteriniveauet er lavt. Det er muligt at anvende jack kablet til afspilning af lyd på TOUCHit
S, når batteriet er løbet tør for strøm.
In-line brug:
• Forbind 3.5mm stikket til 3.5mm jack ingangen på din TOUCHit S Headphone og 3.5mm jack
indgangen på din enhed
• Juster lydstyrken ved hjælp af betjeningspanelet på din enhed
• Nyd musikken

17
Batteri information
• Batteri: Genopladeligt Polymer Lithium-Ion Battery, DC: 3.7V/500mAh
• Spænding: USB DC5V, Anvend det vedlagte USB kabel til
opladning af TOUCHit S Headphone
• Varighed af opladning: Inden du første gang tager TOUCHit S Headphone i brug, skal du sikre dig,
at batteriet er fuldt opladt Ved første opladning skal batteriet oplades i mere end 4 timer Herefter
tager en genopladning 2-3 timer
• TOUCHit S Headphone er i opladningstilstand, når indikationslyset lyser rødt. Det røde lys sluk-
kes, når batteriet er fuldt opladt

18
Foretag opkald med TOUCHit S
Når TOUCHit S forbindes med din enhed kan du modtage og fortage opkald vires headsettet trådløst
Funktion Status for TOUCHit S Betjening
Genopkald til seneste kaldte
nummer
Standby tilstand Dobbelt-tryk på X
knappen
Volume op Samtale tilstand Tryk på Volume+ knappen
Volume ned Samtale tilstand Tryk på Volume- knappen
Besvar opkald Ringer Tryk på X knappen
Afslut opkald Samtale tilstand Tryk på X knappen
Afvis opkald Ringer Hold X knappen i bund i
1 sekund, indtil du hører
indikationslyden
Overfør opkald mellem
TOUCHit S og Bluetooth
enhed
Samtale tilstand Hold X knappen i bund i 3
sekunder for at overføre
samtalen fra TOUCHit S
Headphone til
mobiltelefonen. Hold herefter
MFB knappen i bund i 3
sekunder for at overføre
samtalen tilbage fra telefonen
til TOUCHit S.
Bemærk: Ikke alle mobiltelefoner understøtter alle de listede funktioner. Gennemse venligst
brugermanualen til din mobiltelefon for mere information.
PRODUKT OPSÆTNING
Herunder følger en beskrivelse af hvordan produktet benyttes, beskirvelsen gør brug af funktionerne
beskrevet på side 14 til 15.
Afspil musik med TOUCHit S
Når TOUCHit S forbindes med en Bluetooth enhed, kan du nyde musik trådløst.
Funktion Status for TOUCHit S Betjening
Pause Afspiller musik Tryk på X knappen
Afspil Pause Tryk på X knappen
Næste nummer Afspiller musik Tryk på volume+ knappen
Forrige nummer Afspiller musik Tryk på volume– knappen
Volume+ Afspiller musik Hold volume+ knappen i bund
Volume- Afspiller musik Hold volume– knappen i bund

19
TROUBLESHOOTING
Hvis du har problemer med at betjene din TOUCHit S, beder vi dig afprøve følgende løsninger. Hvis følgende
løsninger ikke afhjælper dit problem, kan du kontakte vores kundeservice på [email protected]
Jeg oplever problemer med stabilitet og forbindelse på TOUCHit S
• Prøv at fjerne parringen imellem din enhed og TOUCHit S. Dette gøres på din enhed ved at vælge
Bluetooth indstillinger og vælge glem/slet ”TOUCHit S”. Herefter skal du igen parre TOUCHit S og
din enhed ved at følge beskrivelsen på side 16
Mine TOUCHit S afspiller ikke musik selv om at de er tilsluttet min enhed
• Tjek venligst lydstyrken på din enhed for at sikre, at den afspiller lyd.
• Ved brug af jack kablet til afspilning af lyd, tjek venligst at stikket sidder korrekt i din enhed
• Hvis dine TOUCHit S stadig ikke spiller når de er tilsluttet din enhed trådløst skal du manuelt
vælge TOUCHit S som afspilningsenhed fra din enhed. For at gøre dette henviser vi til manualen
for din enhed eller den specikke app gør brug af
Jeg hører en bip-lyd i mine TOUCHit S
• Når TOUCHit S laver en bip-lyd skal de oplades
Jeg følger ikke at TOUCHit S sidder behageligt
• Du kan tilpas længden af bøjlen ved at trække eller skubbe stængerne for at sikre et komfortabelt
t
Jeg kan ikke tænde mit headset
• Dit TOUCHit S headset kan være løbet tør for strøm. Prøv at tilslutte TOUCHit S til en oplader i
minimum 4 timer før TOUCHit S tages i brug igen

20
RENGØRING AF PRODUKTET
1. Sluk venligst TOUCHit S før du rengør dit headset. Det er vigtigt at TOUCHit S ikke er tilsluttet en
oplader under rengøring.
2. Anvend ikke ygtige opløsningsmidler (såsom ethanol, kolofonium eller opløsningsmiddel) til at
rengøre med. Til rengøring af headsetet skal du bruge en blød let fugtet klud.
3. Under rengøringen skal du være opmærksom på at undgå vand i USB-indgange, højtalere, mikro-
fon og knapper. Store mængder vand og væsker kan beskadige TOUCHit S
4. Brug en blød, tør og fnugfri klud til rengøring af højtalerstoffet
ADVARSEL: Der må ikke benyttes nogen form for skarpe genstande til rengøring af produktet
TEKNISKE SPECIFIKATIONER
• Model: TOUCHit S Bluetooth and ANC headphones
• Bluetooth version: V5.0
• Operating distance: 10M
• Batteri: 500mAh
• Opladnings tid: 3 hours
• Opladnings current: 220mA
• Musik spilletid:
25 hours (bluetooth on, ANC off)
18 hours (Bluetooth on, ANC on)
• Opkaldstid: 25 hours
• ANC solution: MAX
• Noise reduction performance: op til 22dB
• Driver Unit: Ø40mm
• Frequency Range: 20Hz-20KHz
• Impedence:ANC_OFF:80Ω ANC_ON :110Ω
• Størrelse: 42*175*197mm
• Vægt: 197g