SACKit Touch 350 User manual

1
SACKit Touch 350
2021 User manual
UK
DK
DE

2
CONTENT
Thank you! ................... 3
Quick Start Guide ............. 4
Product overview ............. 4
Product functionality........... 5
The Device ................... 6
Product setup. . . . . . . . . . . . . . . . . 8
Troubleshooting .............. 9
Cleaning of the product ........ 10
Technical specifications ........ 10
Important safety information ... 11
Disposal of the product ........ 12
Complaints ................... 12
Tak! ......................... 13
Quick Start Guide ............. 14
Produkt overblik .............. 14
Produkt funktioner ............ 15
Beskrivelse af produktet ........ 16
Produkt opsætning ............ 18
Troubleshooting .............. 19
Rengøring af produktet......... 20
Tekniske specifikationer ........ 20
Vigtig sikkerhedsinformation .... 21
Bortskaffelse af produktet ...... 22
Reklamationer ................ 22
Vielen dank! .................. 23
Kurzanleitung ................. 24
Produktübersicht .............. 24
Funktionen ................... 25
Produktbeschreibung .......... 26
Produkteinstellung............. 28
Fehlersuche .................. 29
Reinigung .................... 30
Produktangaben............... 30
Entsorgung ................... 32
Reklamation .................. 32

3
THANK YOU!
Thank you for purchasing the SACKit Touch 350 Bluetooth & Acve Noise Cancellaon headphone
from SACKit. Please read the entire instruction manual before using the product and save it for
future reference. We reserve the right to change or update information and to correct errors,
inaccuracies, or missions in text, images, and technical data. If you have any questions regarding
technical problems please contact our customer services. We hope you will enjoy your new SACKit
Touch 350 headphones.
Let SACKit rock your life!
CONGRATULATIONS on your new SACKit product!
Register your new SACKit product and get cool benefits.
1. Go to https://sackit.eu/reg
2. Enter name, e-mail, and product*
Box contents
1. SACKit Touch 350 headphone
2. Fabric travel pouch
3. 3.5mm audio cable
4. USB charging cable
5. Quick start guide
*When you register your product, you agree to receive email newsleers from SACKit.

4
QUICK START GUIDE
When you first get your SACKit Touch 350 headphones you need to charge them before they are
ready for use. SACKit Touch 350 is charged by using the included USB cable.
Charge SACKit Touch 350 for 5 hours minimum before using the product the first time.
Please turn off your headphones after use to prolong battery life.
PRODUCT OVERVIEW
9. 3.5 mm AUX
2. Acve Noise Cancela-
on (ANC)
6. Volume up/down
7. X Buon
4. Charging Port
3. Charging LED
5. Headband
1. Over-Ear Design
8. Power LED

5
PRODUCT FUNCTIONALITY
Here follows a description of all the products features. Please use the Overview in the beginning of
this user manual to locate them on the SACKit Touch 350 (page 4).
1. Over-ear design
• SACKit Touch 350’s design ensure both comfort and sound quality by direcng sound at you and
encapsulates the whole sound without being uncomfortable to wear for a longer me
2. Active Noise Cancelation (ANC)
• Press the Acve noise cancellaon buon to acvate ANC
• With ANC acvated you can minimize background noise to further enjoy your music
3. Charging LED
• Turns red when SACKit Touch 350 is charging
• Turns green when ANC is acvated.
• Turn yellow when ANC is acvated and it is charging.
4. Charging port
• Charging port for the included USB charging cable
5. Headband
• Adjustable headband to ensure a comfortable t for everyone
6. Volume up/down
• Volume buons used to adjust the volume of SACKit Touch 350
• Also used to skip to next or previous song
7. X Button
• Master funcon buon
• Used to power SACKit Touch 350 on and o
• Plays and pause music when the headset is in Bluetooth mode
• Accepts and rejects incoming calls
8. Power indicator
• Indicates when SACKit Touch 350 is turned on and o
• Flashes blue and red when SACKit Touch 350 is in Bluetooth pairing mode
9. 3.5 MM AUX
• 3.5 mm AUX jack connecon to connect the headset to a device without Bluetooth
• In-line use is possible when the baery is empty

6
How to pair SACKit Touch 350 and your device
1. For rst use: Long press the X Buon for 10 seconds. Aer the rst 5 seconds, you will hear the
ON sound. Keep pressing the buon for another 5 seconds to turn on pairing mode, indicated by
ashing the power indicator red and blue
2. Switch on Bluetooth on your device
3. Choose “SACKit Touch 350” under Bluetooth sengs on your device. Your headphones are now
connected with your device
4. Start playing music on your device
5. Long press the X buon to turn o your SACKit Touch 350 headphones
6. SACKit Touch 350 will automacally pair with the last connected device
To connect to a new device make sure that the previous connected device is disconnected otherwise
connecng opportunity won’t appear on the new device.
THE DEVICE
Operation instructions for use after first pairing
1. Aer rst me pairing your SACKit Touch 350 headphones and
2. Bluetooth device will automacally reconnect, the LED light will blink blue once SACKit Touch
350 is successfully paired.
3. Turn the headphones on by holding down the X buon unl you hear the ON sound
4. Long press X buon to turn o SACKit Touch 350.
Note: If the pairing is not successful, please turn the headphone off and back on and retry pairing.
Operation instructions for in-line use
Use the 3.5mm audio cable when you do not wish to use Bluetooth connection or when the battery
needs recharging. In-line use is possible when the battery is empty.
For in-line use:
• Connect the 3.5mm plug into your SACKit Touch 350 Headphone 3.5mm jack, then connect the
other 3.5mm plug to your device 3.5mm jack
• Adjust the volume using the controls on your mobile phone
• Enjoy the music
Bluetooth Multipoint
SACKit Touch 350 comes with the Bluetooth Multipoint feature. This means that up to two devices
can be connected to the headphones at the same time. This enables you to for example connect the
headphones to a computer and a smartphone at the same time. To switch between the two devices,
just pause the music/sound on one device and press play on the other. If your phone rings, the
SACKit Touch 350 will automatically jump on the phone.
To connect a second Bluetooth device after a first one is already connected:
1. Turn o the SACKit Touch 350,
2. Then long press the X Buon for 10 seconds. Aer the rst 5 seconds, you will hear the ON
sound. Keep pressing the buon for another 5 seconds to turn on pairing mode, indicated by as-
hing the power indicator red and blue
3. Switch on Bluetooth on your new device
4. Choose “SACKit Touch 350” under Bluetooth sengs on your device. Your headphones are now
connected with your new device

7
Battery information
• Baery: rechargeable Polymer Lithium-Ion Baery, DC: 3.7V/600mAh
• Power: USB DC5V, Please use the USB cable sealed with our headphone for charging
• Charging Time: For rst me use please be sure the baery has been charged fully before use. It
needs more than 5 hours of charging the rst me, then 4 hours for recharging
• When the red light is on, the headphone is in charge mode. The red light will turn o when the
baery is fully charged.
How to use the Active Noise Cancellation function
1. Push the ANC buon on the le ear cup turning on the green LED light and you can enjoy the
headphones in Acve Noise Cancellaon mode
2. When you don’t need the Acve Noise Cancellaon funcon, turn the ANC funcon of by pus-
hing the ANC buon
3. Acve Noice Cancellaon can be acvated and deacvated even when the SACKit Touch 350
Headphone is turned o. The Acve Noise Cancellaon will also remain on even when you turn
the SACKit Touch 350 Headphone o.

8
Making calls with SACKit Touch 350
When SACKit Touch 350 connected to your device, you can answer and take calls through the
headphones wirelessly.
Funcons Status of headphone Operaon
Redial Last number Standby mode Short press X button twice
quickly
Volume up Conversation mode Short press Volume + button
Volume down Conversation mode Short press Volume - button
Answering calling Ringing Short press X button
End call Conversation mode Short press X button
Reject calling Ringing Press and hold X button for
one second until you hear
indication sound
Transfer the calling between
headset and Bluetooth
devices
Conversation mode Press and hold the X button
for 3 seconds can transfer
the conversation from
headset to mobile phone.
Then press and hold the
X button for 3 seconds to
transfer the conversation
back from mobile phone to
headphone.
Note: Not all the mobile phones support all the functions listed above. Please refer to the instruction
of your device. Some functions and indication tones may vary with depending on the device.
PRODUCT SETUP
Here follows a descripon of the setup of the product. A detailed descripon of the buon’s and
funconality can be found at pages 4 to 5.
Playing Music with SACKit Touch 350
When SACKit Touch 350 connects with the mobile phone or Bluetooth transmitter, you can enjoy
music through the headphone wirelessly.
Funcons Status of headphone Operaon
Pause Playing music Short Press X button
Play Pausing Short Press X button
Next track Playing music Short press volume+ button
Previous track Playing music Short press volume–button
Volume up Playing music Long press Volume + button
Volume down Playing music Long press Volume - button

9
TROUBLESHOOTING
If you have trouble using your SACKit Touch 350 we ask you to try the following soluons. If these
soluons does not x your problem please contact our customer service at inf[email protected].
I experience issues with stability and connecon
• Try to delete the pairing between SACKit Touch 350 and your device on the device. You do this
by accessing the Bluetooth sengs on your device and choose “forget SACKit Touch 350”. Now
pair SACKit Touch 350 and your device by following the descripon found on 6
TOUCHit Over-Ear is not playing music while connected to my device
• Please check volume on your audio device to make sure it is outpung sound
• If you use in-line please make sure that the 3.5mm plug is fully inserted into your audio device
and headset. And please make sure the headphone plug and audio device’s jack scks are clean
• If SACKit Touch 350 is used wirelessly and sll is not playing music, you manually have to choose
to play from SACKit Touch 350 in your device sengs. Please refer to the instrucon of your
device or specic app for further informaon
I’m hearing a beep-sound in my headset
• When SACKit Touch 350 makes a beep-sound, they need recharging. Please charge your
headphones fully
I don’t feel like SACKit Touch 350 is comfortable to wear
• Please adjust the length headband by pull/pushing the earcups to adjust to headset for a
comfortable t
I can’t turn on my headset
• Please recharge your headset by leaving the headset in the charger for minimum 4 hours

10
CLEANING OF THE PRODUCT
1. Kindly switch o SACKit Touch 350 before you clean your headset and remove it from the power
supply
2. Do not use any chemicals to clean the product. If you need to clean the headset, please use a so
cloth with a mild cleaner
3. During cleaning please be aware to avoid water in the USB port, speakers, microphone, and but-
tons. Large amounts of water and uids may damage the headset
4. Use a so, dry, and lint-free cloth to gently clean the speaker fabric.
NOTE: Avoid using sharp objects to clean SACKit Touch 350 earbuds and charging case
TECHNICAL SPECIFICATIONS
• Model: SACKit Touch 350 Bluetooth and ANC headphones
• Bluetooth version: V5.0
• Operang distance: 10M
• Baery: 600mAh
• Charging me: 4 hours
• Charging current: 220mA
• Music playing me:
30 hours (bluetooth on, ANC o)
21 hours (Bluetooth on, ANC on)
• Call me: 30 hours
• ANC soluon: MAX
• Noise reducon performance: up to 22dB
• Driver Unit: Ø40mm
• Frequency Range: 20Hz-20KHz
• Impedence:ANC_OFF:80Ω ANC_ON :110Ω
• Size: 78*24*208mm
• Weight: 243g

11
IMPORTANT SAFETY INFORMATION
Please read the following informaon and operate the product and accessories accordingly to ensure
correct and safe use of the product. We are not responsible for damage caused by failure to comply
with the instrucons or irresponsible use of the product.
Warning
To prevent any res or electrical hazards please act according to the following guidelines:
• Do not disassemble or replace any parts of this device. Please contact professional maintenance
or qualied service center if there is any damage to the device.
• Do not place in any liquid
• If any liquids ows inside the product, please shut down the product and contact customer
service center
• Do not place this device in or close to sources of excessive heat or re. (Such as: candles,
replaces or direct sunlight)
• Please shut down in lightning weather
• Keep this device away from any dust and vibraon.
• Do not use excessive force when using any of the control buons.
• If the product is below 5°C when you receive it, please open the product packaging and wait for it
to reach room temperature.
• To prevent overheang of the product is it necessary to keep a cleared area of 10 cm around the
product while charging
• Be sure to place this device on stable, at and level surfaces while charging.

12
DISPOSAL OF THE PRODUCT
SACKit Touch 350 is made from recyclable and high quality materials. Do not dispose of together
with living garbage. Please understand the local classicaon about collecng electronical, electrical
products that contains baeries. Correct disposal of the product will help to prevent negave impact
to the environment.
COMPLAINTS
Please contact our customer service if you have a complaint or a broken SACKit Touch 350 headset.
If your headset has a defect, please inform your serial number, when you contact us.

13
TAK!
Tak fordi du valgte SACKit Touch 350 Headphone med Bluetooth og Acve Noice Cancellaon fra
SACKit. Vi beder dig læse hele denne brugermanual grundigt, før du tager SACKit Touch 350 i brug.
Gem venligst brugermanualen, så du ald kan slå op i den. Vi tager forbehold for fejl i tekst eller
billeder og nødvendige ændringer i de tekniske specikaoner. Hvis du oplever tekniske problemer,
beder vi dig kontakte vores kundeservice. Vi håber, du får stor glæde af din nye SACKit Touch 350
Headphone.
Let SACKit rock your life!
TILLYKKE med dit nye SACKit produkt!
Registrer dit nye SACKit produkt og få fede fordele.
1. Gå l https://sackit.eu/reg
2. Indtast navn, e-mail og produkt*
Indhold i æsken
1. SACKit Touch 350 headset
2. Stof opbevarings pose
3. 3.5 mm jack kabel
4. USB-opladnings kabel
5. Quick start guide
*Når du registrerer dit produkt, giver du samtykke l at modtage nyhedsbreve fra SACKit.

14
QUICK START GUIDE
Når du modtager dine SACKit Touch 350 headphones skal de oplades før de er klar til brug. SACKit
Touch 350 skal oplades ved hjælp af usb kablet inkluderet i pakken
SACKit Touch 350 skal oplades i minimum 5 timer før brug.
Huske at slukke for SACKit Touch 350 efter brug for at forlænge batteriets levetid
PRODUKT OVERBLIK
9. 3.5mm AUX
2. Acve Noise Cancela-
on (ANC)
6. Volume up/down
7. X Buon
4. Charging Port
3. ANC/Charging LED
5. Headband
1. Over-Ear Design
8. Power LED

15
PRODUKT FUNKTIONER
Herunder følger en beskrivelse af knapper og alle produktets funkoner, knappens nummer henviser
l produktoverblikket præsenteret på side 4.
1. Over-Ear design
• SACKit Touch 350’s design af ørepuderne sikrer komfort, lydkvalitet og mindre støj fra omverde-
nen uden at gå på kompromis med lydkvaliteten
2. Active Noise Cancelation (ANC)
• Tryk på Acve Noise Cancellaon knappen akverer ANC
• Når ANC er akveret, kan du minimere baggrundsstøj så du kan nyde din musik endnu mere
3. ANC/Charging LED
• Lyser rødt når SACKit Touch 350 oplader
• Lyser grønt når ANC er akveret
• Lyser gult når ANC er akveret og SACKit Touch 350 oplades
4. Charging port
• USB-indgang for opladningskablet
5. Headband
• Justerbart headband som sikre en behagelig pasform l alle
6. Volume up/down
• Volume knapperne bruges l at justerer SACKit Touch 350’s afspilnings volumen
• Bruges også l at skie l næste eller forrige sang
8. X Button
• Master funcon knap
• Tænder og slukker SACKit Touch 350
• I Bluetooth mode kan knappen bruges l at pause/afspille musik
• Kan bruges l at accepterer eller afvise indgående opkald
6. Power LED
• Lyser når SACKit Touch 350 tænder og slukker
• Blinker blåt og rødt når SACKit Touch 350 er i Bluetooth pairing mode
9. 3.5mm AUX
• 3.5 mm AUX jack indgang. Bruges l at lslue headsetet enheder uden Bluetooth
• In-line brug kan også benyes hvis SACKit Touch 350 er løbet tør for strøm

16
How to pair SACKit Touch 350 and your device
1. Til første brug: Hold X knappen i bund i 10 sekunder. Eer de første 5 sekunder hører du TÆND
lyden. Bliv ved med at holde knappen i bund i endnu 5 sekunder for at sæe SACKit Touch 350 i
pairing lstand, som indikeres ved blinkende rød og blå LED lys
2. Tænd for Bluetooth på din enhed
3. Vælg “SACKit Touch 350” under Bluetooth indsllinger på din enhed. Dit headset er nu lkoblet
din enhed
4. Du kan nu starte musikken på din enhed
5. Hold X knappen i bund for at slukke SACKit Touch 350 igen
6. SACKit Touch 350 vil automask parre med sidst lkoblede enhed
For at lslue SACKit Touch 350 l en ny enhed skal du sikre dig at din dligere enheder er discon-
nected og har slukket Bluetooth, ellers er headsetet ikke søgbart
BESKRIVELSE AF PRODUKTET
Betjeningsvejledning efter første tilslutning
1. Eer successesfuld lslutning vil SACKit Touch 350 og din Bluetooth enhed automask være
forbundet
2. Tænd SACKit Touch 350 ved at holde X knappen i bund indl du hører TÆND lyden
3. Hold X knappen i bund for at slukke SACKit Touch 350
4. LED lyset vil blinke blåt, når SACKit Touch 350 er lsluet korrekt
Bemærk: Hvis du har problemer med at oprette forbindelse, sluk da venligst SACKit Touch 350 og
prøv at tilslutte igen.
Betjeningsvejledning til afspilning via kabel
Anvend det vedlagte jack kabel, når du ikke ønsker at benytte den trådløse Bluetooth forbindelse
eller når batteriniveauet er lavt. Det er muligt at anvende jack kablet til afspilning af lyd på SACKit
Touch 350, når batteriet er løbet tør for strøm.
In-line brug:
• Forbind 3.5mm skket l 3.5mm jack ingangen på din SACKit Touch 350 Headphone og 3.5mm
jack indgangen på din enhed
• Juster lydstyrken ved hjælp af betjeningspanelet på din enhed
• Nyd musikken
Bluetooth Multipoint
SACKit Touch 350 har Bluetooth Multipoint. Det betyder at op til to enheder kan kobles til
headsettet på en gang. Dette giver dig mulighed for for eksempel at forbinde headsettet til en
computer og en smartphone på samme tid. For at skifte mellem de to enheder sætter du bare
musikken/lyden på pause på den ene enhed og trykker på play på den anden. Hvis din telefon ringer
vil SACKit Touch 350 automatisk hoppe på telefonen.
Sådan opretter du forbindelse til en anden Bluetooth-enhed, når den første er tilsluttet:
1. Sluk SACKit Touch 350.
2. Hold X knappen i bund i 10 sekunder. Eer de første 5 sekunder hører du TÆND lyden. Bliv ved
med at holde knappen i bund i endnu 5 sekunder for at sæe SACKit Touch 350 i pairing lstand,
som indikeres ved blinkende rød og blå LED lys
3. Tænd for Bluetooth på din nye enhed du vil koble l
4. Vælg “SACKit Touch 350” under Bluetooth indsllinger på din enhed. Dit headset er nu også
lkoblet den nye enhed.

17
Batteri information
• Baeri: Genopladeligt Polymer Lithium-Ion Baery, DC: 3.7V/600mAh
• Spænding: USB DC5V, Anvend det vedlagte USB kabel l
opladning af SACKit Touch 350 Headphone
• Varighed af opladning: Inden du første gang tager SACKit Touch 350 Headphone i brug, skal du
sikre dig, at baeriet er fuldt opladt Ved første opladning skal baeriet oplades i mere end 5 mer
Hereer tager en genopladning 4 mer
• SACKit Touch 350 Headphone er i opladningslstand, når indikaonslyset lyser rødt. Det røde lys
slukkes, når baeriet er fuldt opladt
Sådan bruges Active Noise Cancellation funktionen
1. Tryk på ANC-knappen for at akvere Acve Noise Cancellaon. Når ANC er slået l, lyser LED’en
grønt og du kan nu nyde dit headset i Acve Noise Cancellaon mode
2. Når du ikke har behov for at benye denne funkon, slukker du for ANC ved at trykke på
ANC-knappen
3. Det er muligt at akvere og deakvere Acve Noice Cancellaon selv når SACKit Touch 350
headphone er slukket. Acve Noice Cancellaon forbliver også tændt selv når du slukker din
SACKit Touch 350 headphone

18
Foretag opkald med SACKit Touch 350
Når SACKit Touch 350 forbindes med din enhed kan du modtage og fortage opkald via headsettet
trådløst
Funkon Status for SACKit Touch 350 Betjening
Genopkald til seneste kaldte
nummer
Standby tilstand Dobbelt-tryk på X
knappen
Volume op Samtale tilstand Tryk på Volume+ knappen
Volume ned Samtale tilstand Tryk på Volume- knappen
Besvar opkald Ringer Tryk på X knappen
Afslut opkald Samtale tilstand Tryk på X knappen
Afvis opkald Ringer Hold X knappen i bund i
1 sekund, indtil du hører
indikationslyden
Overfør opkald mellem
SACKit Touch 350 og
Bluetooth enhed
Samtale tilstand Hold X knappen i bund i 3
sekunder for at overføre
samtalen fra SACKit Touch
350 Headphone til
mobiltelefonen. Hold
herefter X knappen i bund i
3 sekunder for at overføre
samtalen tilbage fra telefonen
til SACKit Touch 350.
Bemærk: Ikke alle mobiltelefoner understøtter alle de listede funktioner. Gennemse venligst
brugermanualen til din mobiltelefon for mere information.
PRODUKT OPSÆTNING
Herunder følger en beskrivelse af hvordan produktet benyes, beskrivelsen gør brug af funkonerne
beskrevet på side 14 l 15.
Afspil musik med SACKit Touch 350
Når SACKit Touch 350 forbindes med en Bluetooth enhed, kan du nyde musik trådløst.
Funkon Status for SACKit Touch 350 Betjening
Pause Afspiller musik Tryk på X knappen
Afspil Pause Tryk på X knappen
Næste nummer Afspiller musik Tryk på volume+ knappen
Forrige nummer Afspiller musik Tryk på volume– knappen
Volume+ Afspiller musik Hold volume+ knappen i bund
Volume- Afspiller musik Hold volume– knappen i bund

19
TROUBLESHOOTING
Hvis du har problemer med at betjene din SACKit Touch 350, beder vi dig afprøve følgende løsninger. Hvis
følgende løsninger ikke ajælper dit problem, kan du kontakte vores kundeservice på inf[email protected]
Jeg oplever problemer med stabilitet og forbindelse på SACKit Touch 350
• Prøv at erne parringen imellem din enhed og SACKit Touch 350. Dee gøres på din enhed ved
at vælge Bluetooth indsllinger og vælge glem/slet ”SACKit Touch 350”. Hereer skal du igen
parre SACKit Touch 350 og din enhed ved at følge beskrivelsen på side 16
Mine SACKit Touch 350 earbuds afspiller ikke musik selv om at de er lsluet min enhed
• Tjek venligst lydstyrken på din enhed for at sikre, at den afspiller lyd.
• Ved brug af jack kablet l afspilning af lyd, tjek venligst at skket sidder korrekt i din enhed
• Hvis dine SACKit Touch 350 stadig ikke spiller når de er lsluet din enhed trådløst skal du
manuelt vælge SACKit Touch 350 som afspilningsenhed fra din enhed. For at gøre dee henviser
vi l manualen for din enhed eller den specikke app gør brug af
Jeg hører en bip-lyd i mine SACKit Touch 350
• Når SACKit Touch 350 laver en bip-lyd skal de oplades
Jeg følger ikke at SACKit Touch 350 sidder behageligt
• Du kan lpas længden af bøjlen ved at trække eller skubbe stængerne for at sikre et komfortabelt
t
Jeg kan ikke tænde mit headset
• Dit SACKit Touch 350 headset kan være løbet tør for strøm. Prøv at lslue SACKit Touch 350 l
en oplader i minimum 4 mer før SACKit Touch 350 tages i brug igen

20
RENGØRING AF PRODUKTET
1. Sluk venligst SACKit Touch 350 før du rengør dit headset. Det er viggt at SACKit Touch 350 ikke
er lsluet en oplader under rengøring.
2. Anvend ikke ygge opløsningsmidler (såsom ethanol, kolofonium eller opløsningsmiddel) l at
rengøre med. Til rengøring af headsetet skal du bruge en blød let fugtet klud.
3. Under rengøringen skal du være opmærksom på at undgå vand i USB-indgange, højtalere, mikro-
fon og knapper. Store mængder vand og væsker kan beskadige SACKit Touch 350
4. Brug en blød, tør og fnugfri klud l rengøring af højtalerstoet
ADVARSEL: Der må ikke benyes nogen form for skarpe genstande l rengøring af produktet
TEKNISKE SPECIFIKATIONER
• Model: TOUCHit Over-Ear Bluetooth and ANC headphones
• Bluetooth version: V5.0
• Operang distance: 10M
• Baeri: 600mAh
• Opladnings d: 4 hours
• Opladnings current: 220mA
• Musik spilled:
30 hours (bluetooth on, ANC o)
21 hours (Bluetooth on, ANC on)
• Opkaldsd: 30 hours
• ANC soluon: MAX
• Noise reducon performance: op l 22dB
• Driver Unit: Ø40mm
• Frequency Range: 20Hz-20KHz
• Impedence:ANC_OFF:80Ω ANC_ON :110Ω
• Størrelse: 78*24*208mm
• Vægt: 243g