SACKit Touch 200 User manual

1
SACKit Touch 200
USER MANUAL
BRUGERMANUAL
GEBRAUCHSANLEITUNG
UK
DK
DE

2
CONTENT
Thank you! ......................... 3
Quick Start Guide .................. 4
Product overview .................. 4
Product functionality............... 5
The Device ......................... 6
Product setup ...................... 8
Troubleshooting ................... 9
Cleaning of the product ............ 10
Technical specifications ............ 10
Important safety information ...... 11
Disposal of the product ............ 12
Complaints ......................... 12
Tak!................................. 13
Quick Start Guide .................. 14
Produkt overblik ................... 14
Produkt funktioner................. 15
Beskrivelse af produktet ........... 16
Produkt opsætning................. 18
Troubleshooting ................... 19
Rengøring af produktet ............ 20
Tekniske specifikationer ........... 20
Vigtig sikkerhedsinformation ...... 21
Bortskaffelse af produktet ......... 22
Reklamationer...................... 22
Vielen dank! ........................ 23
Kurzanleitung ...................... 24
Produktübersicht .................. 24
Funktionen ......................... 25
Produktbeschreibung .............. 26
Produkteinstellung................. 28
Fehlersuche ........................ 29
Reinigung........................... 30
Produktangaben ................... 30
Entsorgung......................... 32
Reklamation ........................ 32

3
THANK YOU!
Thank you for purchasing the SACKit Touch 200 Bluetooth & Active Noise Cancellation
headphone from SACKit. Please read the entire instruction manual before using the
product and save it for future reference. We reserve the right to change or update
information and to correct errors, inaccuracies, or missions in text, images, and technical
data. If you have any questions regarding technical problems please contact our customer
services. We hope you will enjoy your new SACKit Touch 200 headphones.
Let SACKit rock your life!

4
QUICK START GUIDE
When you first get your SACKit Touch 200 headphones you need to charge them before they are ready
for use. SACKit Touch 200 is charged by using the included USB cable.
Charge SACKit Touch 200 for 4 hours minimum before using the product the first time.
Please turn off your headphones after use to prolong battery life.
PRODUCT OVERVIEW
9. 3.5mm AUX
2. Active Noise
Cancellation (ANC)
6. Volume up/down
7. X Button
4. Charging Port
3. LED Charging Indicator
5. Headband
1. Double Doughnut
Design
8. Power Indicator

5
PRODUCT FUNCTIONALITY
Here follows a description of all the products features. Please use the Overview in the beginning of this
user manual to locate them on the SACKit Touch 200 (page 4).
1. Double doughnut design
• The double doughnut ear cushions ensure both comfort and sound quality by directing sound at you
and encapsulates the whole sound without being uncomfortable to wear for a longer time.
2. Active Noise Cancellation (ANC)
• Press the Active noise cancellation button to activate ANC
• With ANC activated you can minimize background noise to further enjoy your music
3. LED Charging Indicator
• Turns on when SACKit Touch 200 is charging
4. Charging port
• Charging port for the included USB charging cable
5. Headband
• Adjustable headband to ensure a comfortable t for everyone
6. Volume up/down
• Volume buttons used to adjust the volume of SACKit Touch 200
• Also used to skip to next or previous song
7. X Button
• Master function button
• Used to power SACKit Touch 200 on and off
• Plays and pause music when the headset is in Bluetooth mode
• Accepts and rejects incoming calls
8. Power indicator
• Indicates when SACKit Touch 200 is turned on and off
• Flashes when SACKit Touch 200 is in Bluetooth pairing mode
9. 3.5mm AUX
• 3.5 mm AUX jack connection to connect the headset to a device without Bluetooth
• In-line use is possible when the battery is empty

6
How to pair SACKit Touch 200 and your device
1. First use: Long press the X Button for 10 seconds. After the rst 5 seconds, you will hear the ON
sound. Keep pressing the button for another 5 seconds to turn on pairing mode, indicated by ashing
the power indicator red and blue
2. Switch on Bluetooth on your device
3. Choose “SACKit Touch 200” under Bluetooth settings on your device. Your headphones are now con-
nected with your device
4. Start playing music on your device
5. Long press the X button to turn off your SACKit Touch 200 headphones
6. SACKit Touch 200 will automatically pair with the last connected device
To connect to a new device make sure that the previous connected device is disconnected otherwise con-
necting opportunity won’t appear on the new device.
THE DEVICE
Operation instructions for use after first pairing
1. After rst time pairing your SACKit Touch 200 headphones and your Bluetooth device will be conne-
cted automatically
2. Bluetooth device will automatically reconnect, the LED light will blink blue once SACKit Touch 200
is successfully paired.
3. Turn the headphones on by holding down the X button until you hear the ON sound
4. Long press X button to turn off SACKit Touch 200
Note: If the pairing is not successful, please turn the headphone off and back on and retry pairing.
Operation instructions for in-line use
Use the 3.5mm audio cable when you do not wish to use Bluetooth connection or when the battery needs
recharging. In-line use is possible when the battery is empty.
For in-line use:
• Connect the 3.5mm plug into your SACKit Touch 200 Headphone 3.5mm jack, then connect the oth-
er 3.5mm plug to your device 3.5mm jack
• Adjust the volume using the controls on your mobile phone
• Enjoy the music
Bluetooth Multipoint
SACKit Touch 200 comes with the Bluetooth Multipoint feature. This means that up to two devices
can be connected to the headphones at the same time. This enables you to for example connect the
headphones to a computer and a smartphone at the same time. To switch between the two devices,
just pause the music/sound on one device and press play on the other. If your phone rings, the SACKit
Touch 200 will automatically jump on the phone.
To connect a second Bluetooth device after a first one is already connected:
1. Turn off the SACKit Touch 200,
2. Then long press the X Button for 10 seconds. After the rst 5 seconds, you will hear the ON sound.
Keep pressing the button for another 5 seconds to turn on pairing mode, indicated by ashing the
power indicator red and blue
3. Switch on Bluetooth on your new device
4. Choose “SACKit Touch 200” under Bluetooth settings on your device. Your headphones are now
connected with your new device

7
How to use the Active Noise Cancellation function
1. Push the ANC button on the left ear cup turning on the green LED light and you can enjoy the headp-
hones in Active Noise Cancellation mode
2. When you don’t need the Active Noise Cancellation function, turn the ANC function of by pushing the
ANC button
3. Active Noice Cancellation can be activated and deactivated even when the SACKit Touch 200 Head-
phone is turned off. The Active Noise Cancellation will also remain on even when you turn the SACKit
Touch 200 Headphone off.
Battery information
• Battery: rechargeable Polymer Lithium-Ion Battery, DC: 3.7V/500mAh
• Power: USB DC5V, Please use the USB cable sealed with our headphone for charging
• Charging Time: For rst time use please be sure the battery has been charged fully before use. It
needs more than 4 hours of charging the rst time, then 2-3 hours for recharging
• When the red light is on, the headphone is in charge mode. The red light will turn off when the battery
is fully charged.

8
Making calls with SACKit Touch 200
WhenSACKitTouch 200connectedtoyourdevice,youcananswer and takecallsthroughtheheadphones
wirelessly.
Functions Status of headphone Operation
Redial Last number Standby mode Short press X button twice quickly
Volume up Conversation mode Short press Volume(+) button
Volume down Conversation mode Short press Volume(-) button
Answering calling Ringing Short press X button
End call Conversation mode Short press X button
Reject calling Ringing Press and hold X button for one
second until you hear indication
sound
Transfer the calling between
headset and Bluetooth
devices
Conversation mode Press and hold the X button
for 3 seconds can transfer the
conversation from headset to mobile
phone. Then press and hold the X
button for 3 seconds to transfer the
conversation back from mobile phone
to headphone.
Note: Not all the mobile phones support all the functions listed above. Please refer to the instruction of
your device. Some functions and indication tones may vary with depending on the device.
PRODUCT SETUP
Here follows a description of the setup of the product. A detailed description of the button’s and functio-
nality can be found at pages 4 to 5.
Playing Music with SACKit Touch 200
When SACKit Touch 200 connects with the mobile phone or Bluetooth transmitter, you can enjoy music
through the headphone wirelessly.
Functions Status of headphone Operation
Pause Playing music Short Press X button
Play Pausing Short Press X button
Next track Playing music Short press volume(+) button
Previous track Playing music Short press volume(–) button
Volume up Playing music Long press Volume(+) button
Volume down Playing music Long press Volume(-) button

9
TROUBLESHOOTING
If you have trouble using your SACKit Touch 200 we ask you to try the following solutions. If these
solutions does not x your problem please contact our customer service at [email protected].
I experience issues with stability and connection
• Try to delete the pairing between SACKit Touch 200 and your device on the device. You do this by
accessing the Bluetooth settings on your device and choose “forget SACKit Touch 200”. Now pair
SACKit Touch 200 and your device by following the description found on 6
SACKit Touch 200 is not playing music while connected to my device
• Please check volume on your audio device to make sure it is outputting sound
• If you use in-line please make sure that the 3.5mm plug is fully inserted into your audio device and
headset. And please make sure the headphone plug and audio device’s jack sticks are clean
• If SACKit Touch 200 is used wirelessly and still is not playing music, you manually have to choose to
play from SACKit Touch 200 in your device settings. Please refer to the instruction of your device or
specic app for further information
I’m hearing a beep-sound in my headset
• WhenSACKitTouch200makesabeep-sound,theyneedrecharging.Pleasechargeyourheadphonesfully
I don’t feel like SACKit Touch 200 is comfortable to wear
• Please adjust the length headband by pull/pushing the earcups to adjust to headset for a comfortable
t
I can’t turn on my headset
• Please recharge your headset by leaving the headset in the charger for minimum 4 hours

10
CLEANING OF THE PRODUCT
1. Kindly switch off SACKit Touch 200 before you clean your headset and remove it from the power
supply
2. Do not use any chemicals to clean the product. If you need to clean the headset, please use a soft cloth
with a mild cleaner
3. During cleaning please be aware to avoid water in the USB port, speakers, microphone, and buttons.
Large amounts of water and uids may damage the headset
4. Use a soft, dry, and lint-free cloth to gently clean the speaker fabric.
NOTE: Avoid using sharp objects to clean SACKit Touch 200 earbuds and charging case
TECHNICAL SPECIFICATIONS
• Model: SACKit Touch 200 Bluetooth and ANC headphones
• Bluetooth version: V5.0
• Operating distance: 10M
• Bluetooth Multipoint
• Battery: 500mAh
• Charging time: 3 hours
• Charging current: 220mA
• Music playing time:
25 hours (bluetooth on, ANC off)
18 hours (Bluetooth on, ANC on)
• Call time: 25 hours
• ANC solution: MAX
• Noise reduction performance: up to 22dB
• Frequency Range: 20Hz-20KHz
• Impedence:ANC_OFF:80Ω ANC_ON :110Ω
• Size: 42*175*197mm
• Weight: 197g

11
IMPORTANT SAFETY INFORMATION
Please read the following information and operate the product and accessories accordingly to ensure
correct and safe use of the product. We are not responsible for damage caused by failure to comply with
the instructions or irresponsible use of the product.
Warning
To prevent any res or electrical hazards please act according to the following guidelines:
• Do not disassemble or replace any parts of this device. Please contact professional maintenance or
qualied service center if there is any damage to the device.
• Do not place in any liquid
• If any liquids ows inside the product, please shut down the product and contact customer service
center
• Do not place this device in or close to sources of excessive heat or re. (Such as: candles, replaces or
direct sunlight)
• Please shut down in lightning weather
• Keep this device away from any dust and vibration.
• Do not use excessive force when using any of the control buttons.
• If the product is below 5°C when you receive it, please open the product packaging and wait for it to
reach room temperature.
• To prevent overheating of the product is it necessary to keep a cleared area of 10 cm around the
product while charging
• Be sure to place this device on stable, at and level surfaces while charging.

12
DISPOSAL OF THE PRODUCT
SACKit Touch 200 is made from recyclable and high quality materials. Do not dispose of together with
living garbage. Please understand the local classication about collecting electronical, electrical products
that contains batteries. Correct disposal of the product will help to prevent negative impact to the en-
vironment.
COMPLAINTS
Please contact our customer service if you have a complaint or a broken SACKit Touch 200 headset. If
your headset has a defect, please inform your serial number, when you contact us.

13
TAK!
Tak fordi du valgte SACKit Touch 200 Headphone med Bluetooth og Active Noice Can-
cellation fra SACKit. Vi beder dig læse hele denne brugermanual grundigt, før du tager
SACKit Touch 200 i brug. Gem venligst brugermanualen, så du altid kan slå op i den. Vi
tager forbehold for fejl i tekst eller billeder og nødvendige ændringer i de tekniske speci-
kationer. Hvis du oplever tekniske problemer, beder vi dig kontakte vores kundeservice.
Vi håber, du får stor glæde af din nye SACKit Touch 200 Headphone.
Let SACKit rock your life!

14
QUICK START GUIDE
Når du modtager dine SACKit Touch 200 headphones skal de oplades før de er klar til brug. SACKit
Touch 200skal oplades hvem hjælp af usb kablet inkluderet i pakken
SACKit Touch 200 skal oplades i minimum 4 timer før brug.
Husk at slukke for SACKit Touch 200 efter brug for at forlænge batteriets levetid
PRODUKT OVERBLIK
9. 3.5mm AUX
2. Active Noise
Cancellation (ANC)
6. Volume up/down
7. X Button
4. Charging Port
3. LED Charging Indicator
5. Headband
1. Double Doughnut
Design
8. Power Indicator

15
PRODUKT FUNKTIONER
Herunder følger en beskrivelse af knapper og alle produktets funktioner, knappens nummer henviser til
produktoverblikket præsenteret på side 4.
1. Double doughnut design
• Det specielle design af ørepuderne sikrer komfort, lydkvalitet og mindre støj fra omverdenen uden
at gå på kompromis med lydkvaliteten
2. Active Noise Cancellation (ANC)
• Tryk på Active Noise Cancellation knappen aktiverer ANC
• Når ANC er aktiveret, kan du minimere baggrundsstøj så du kan nyde din musik endnu mere
3. LED Charging Indicator
• Tænder når SACKit Touch 200 oplader
4. Charging port
• USB-indgang for opladningskablet
5. Headband
• Justerbart headband som sikre en behagelig pasform til alle
6. Volume up/down
• Volume knapperne bruges til at justerer SACKit Touch 200’s afspilnings volumen
• Bruges også til at skifte til næste eller forrige sang
7. X Button
• Master function knap
• Tænder og slukker SACKit Touch 200
• I Bluetooth mode kan knappen bruges til at pause/afspille musik
• Kan bruges til at accepterer eller afvise indgående opkald
8. Power indicator
• Lyser når SACKit Touch 200 tænder og slukker
Blinker når SACKit Touch 200 er i Bluetooth pairing mode
9. 3.5mm AUX
• 3.5 mm AUX jack indgang. Bruges til at tilslutte headsetet enheder uden Bluetooth
• In-line brug kan også benyttes hvis SACKit Touch 200 er løbet tør for strøm

16
Sådan parrer du SACKit Touch 200 og din enhed
1. Til første brug: Hold X knappen i bund i 10 sekunder. Efter de første 5 sekunder hører du TÆND ly-
den. Bliv ved med at holde knappen i bund i endnu 5 sekunder for at sætte SACKit Touch 200 i pairing
tilstand, som indikeres ved blinkende rød og blå LED lys
2. Tænd for Bluetooth på din enhed
3. Vælg “SACKit Touch 200” under Bluetooth indstillinger på din enhed. Dine headset er nu tilkoblet din
enhed
4. Du kan nu starte musikken på din enhed
5. Hold X knappen i bund for at slukke SACKit Touch 200 igen
6. SACKit Touch 200 vil automatisk parre med sidst tilkoblede enhed
For at tilslutte SACKit Touch 200 til en ny enhed skal du sikre dig at din tidligere enheder er disconnected
og har slukket Bluetooth, ellers er headsetet ikke søgbart
BESKRIVELSE AF PRODUKTET
Betjeningsvejledning efter første tilslutning
1. Efter succesfuld tilslutning vil SACKit Touch 200 og din Bluetooth enhed automatisk være forbundet
2. Tænd SACKit Touch 200 ved at holde X knappen i bund indtil du hører TÆND lyden
3. Hold X knappen i bund for at slukke SACKit Touch 200
4. LED lyset vil blinke blåt, når SACKit Touch 200 er tilsluttet korrekt
Bemærk: Hvis du har problemer med at oprette forbindelse, sluk da venligst SACKit Touch 200 og prøv
at tilslutte igen.
Betjeningsvejledning til afspilning via kabel
Anvend det vedlagte jack kabel, når du ikke ønsker at benytte den trådløse Bluetooth forbindelse eller
når batteriniveauet er lavt. Det er muligt at anvende jack kablet til afspilning af lyd på SACKit Touch 200,
når batteriet er løbet tør for strøm.
In-line brug:
• Forbind 3.5mm stikket til 3.5mm jack ingangen på din SACKit Touch 200 Headphone og 3.5mm jack
indgangen på din enhed
• Juster lydstyrken ved hjælp af betjeningspanelet på din enhed
• Nyd musikken
Bluetooth Multipoint
SACKit Touch 200 har Bluetooth Multipoint. Det betyder at op til to enheder kan kobles til headsettet
på en gang. Dette giver dig mulighed for for eksempel at forbinde headsettet til en computer og en
smartphone på samme tid. For at skifte mellem de to enheder sætter du bare musikken/lyden på pause på
den ene enhed og trykker på play på den anden. Hvis din telefon ringer vil SACKit Touch 200 automatisk
hoppe på telefonen.
Sådan opretter du forbindelse til en anden Bluetooth-enhed, når den første er tilsluttet:
1. Sluk SACKit Touch 200.
2. Hold X knappen i bund i 10 sekunder. Efter de første 5 sekunder hører du TÆND lyden. Bliv ved med
at holde knappen i bund i endnu 5 sekunder for at sætte SACKit Touch 200 i pairing tilstand, som
indikeres ved blinkende rød og blå LED lys
3. Tænd for Bluetooth på din nye enhed du vil koble til
4. Vælg “SACKit Touch 200” under Bluetooth indstillinger på din enhed. Dit headset er nu også tilkoblet
den nye enhed.

17
Sådan bruges Active Noise Cancellation funktionen
1. Tryk på ANC-knappen for at aktivere Active Noise Cancellation. Når ANC er slået til, lyser LED’en
grønt og du kan nu nyde dit headset i Active Noise Cancellation mode
2. Når du ikke har behov for at benytte denne funktion, slukker du for ANC ved at trykke på ANC-knap-
pen
3. Det er muligt at aktivere og deaktivere Active Noice Cancellation selv når SACKit Touch 200 headp-
hone er slukket. Active Noice Cancellation forbliver også tændt selv når du slukker din SACKit Touch
200 headphone
Batteri information
• Batteri: Genopladeligt Polymer Lithium-Ion Battery, DC: 3.7V/500mAh
• Spænding: USB DC5V, Anvend det vedlagte USB kabel til opladning af TSACKit Touch 200 Head-
phone
• Varighed af opladning: Inden du første gang tager SACKit Touch 200 Headphone i brug, skal du sikre
dig, at batteriet er fuldt opladt Ved første opladning skal batteriet oplades i mere end 4 timer. Hereft-
er tager en genopladning 2-3 timer
• SACKit Touch 200 Headphone er i opladningstilstand, når indikationslyset lyser rødt. Det røde lys
slukkes, når batteriet er fuldt opladt

18
Foretag opkald med SACKit Touch 200
NårSACKit Touch 200 forbindesmed din enhedkandu modtage ogfortage opkald viresheadsettettrådløst
Funktion Status for SACKit Touch 200 Betjening
Genopkald til seneste kaldte
nummer
Standby tilstand Dobbelt-tryk på X
knappen
Volume op Samtale tilstand Tryk på Volume+ knappen
Volume ned Samtale tilstand Tryk på Volume- knappen
Besvar opkald Ringer Tryk på X knappen
Afslut opkald Samtale tilstand Tryk på X knappen
Afvis opkald Ringer Hold X knappen i bund i 1 sekund,
indtil du hører indikationslyden
Overfør opkald mellem
SACKit Touch 200 og Bluetooth
enhed
Samtale tilstand Hold X knappen i bund i 3
sekunder for at overføre
samtalen fra SACKit Touch 200
Headphone til
mobiltelefonen. Hold herefter
MFB knappen i bund i 3 sekunder
for at overføre samtalen tilbage
fra telefonen til SACKit Touch
200 .
Bemærk: Ikke alle mobiltelefoner understøtter alle de listede funktioner. Gennemse venligst
brugermanualen til din mobiltelefon for mere information.
PRODUKT OPSÆTNING
Herunder følger en beskrivelse af hvordan produktet benyttes, beskirvelsen gør brug af funktionerne
beskrevet på side 14 til 15.
Afspil musik med SACKit Touch 200
Når SACKit Touch 200 forbindes med en Bluetooth enhed, kan du nyde musik trådløst.
Funktion Status for SACKit Touch 200 Betjening
Pause Afspiller musik Tryk på X knappen
Afspil Pause Tryk på X knappen
Næste nummer Afspiller musik Tryk på volume(+) knappen
Forrige nummer Afspiller musik Tryk på volume(–) knappen
Volume + Afspiller musik Hold volume(+) knappen i bund
Volume - Afspiller musik Hold volume(–) knappen i bund

19
TROUBLESHOOTING
Hvis du har problemer med at betjene din SACKit Touch 200, beder vi dig afprøve følgende løsninger. Hvis følgende
løsninger ikke afhjælper dit problem, kan du kontakte vores kundeservice på [email protected]
Jeg oplever problemer med stabilitet og forbindelse på SACKit Touch 200
• Prøv at fjerne parringen imellem din enhed og SACKit Touch 200. Dette gøres på din enhed ved at
vælge Bluetooth indstillinger og vælge glem/slet ”SACKit Touch 200”. Herefter skal du igen parre
SACKit Touch 200 og din enhed ved at følge beskrivelsen på side 16
Mine SACKit Touch 200 afspiller ikke musik selv om at de er tilsluttet min enhed
• Tjek venligst lydstyrken på din enhed for at sikre, at den afspiller lyd.
• Ved brug af jack kablet til afspilning af lyd, tjek venligst at stikket sidder korrekt i din enhed
• Hvis dine SACKit Touch 200 stadig ikke spiller når de er tilsluttet din enhed trådløst skal du manuelt
vælge SACKit Touch 200 som afspilningsenhed fra din enhed. For at gøre dette henviser vi til manualen
for din enhed eller den specikke app gør brug af
Jeg hører en bip-lyd i mine SACKit Touch 200
• Når SACKit Touch 200 laver en bip-lyd skal de oplades
Jeg følger ikke at SACKit Touch 200 sidder behageligt
• Du kan tilpas længden af bøjlen ved at trække eller skubbe stængerne for at sikre et komfortabelt t
Jeg kan ikke tænde mit headset
• Dit SACKit Touch 200 headset kan være løbet tør for strøm. Prøv at tilslutte SACKit Touch 200 til en
oplader i minimum 4 timer før SACKit Touch 200 tages i brug igen

20
RENGØRING AF PRODUKTET
1. Sluk venligst SACKit Touch 200 før du rengør dit headset. Det er vigtigt at SACKit Touch 200 ikke er
tilsluttet en oplader under rengøring.
2. Anvend ikke ygtige opløsningsmidler (såsom ethanol, kolofonium eller opløsningsmiddel) til at ren-
gøre med. Til rengøring af headsetet skal du bruge en blød let fugtet klud.
3. Under rengøringen skal du være opmærksom på at undgå vand i USB-indgange, højtalere, mikrofon
og knapper. Store mængder vand og væsker kan beskadige SACKit Touch 200
4. Brug en blød, tør og fnugfri klud til rengøring af højtalerstoffet
ADVARSEL: Der må ikke benyttes nogen form for skarpe genstande til rengøring af produktet
TEKNISKE SPECIFIKATIONER
• Model: SACKit Touch 200 Bluetooth and ANC headphones
• Bluetooth version: V5.0
• Operating distance: 10M
• Bluetooth Multipoint
• Batteri: 500mAh
• Opladnings tid: 3 hours
• Opladnings current: 220mA
• Musik spilletid:
25 hours (bluetooth on, ANC off)
18 hours (Bluetooth on, ANC on)
• Opkaldstid: 25 hours
• ANC solution: MAX
• Noise reduction performance: op til 22dB
• Frequency Range: 20Hz-20KHz
• Impedence:ANC_OFF:80Ω ANC_ON :110Ω
• Størrelse: 42*175*197mm
• Vægt: 197g