Saeco Philips Intelia HD8752 User manual

USER MANUAL
PLEASE READ THIS USER MANUAL CAREFULLY BEFORE USING THE MACHINE.
Register your product and get support at
www.philips.com/welcome
English
Type HD8752 / HD8881
EN
02
02

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against fire, electric shock and injury to persons do not immerse
cord, plugs, or appliance in water or other liquid.
4. Close supervision is necessary when the appliance is used by or near
children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool
before putting on or taking off parts, and before cleaning the appliance.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or has been damaged in any manner. Return
appliance to the nearest authorized service facility for examination, repair
or adjustment.
7. The use of accessory attachments not recommended by the appliance
manufacturer may result in fire, electric shock or injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
10.Do not place on or near a hot gas or electric burner, or in a heated oven.
11.Always attach plug to appliance first, then plug cord into wall outlet. To
disconnect, turn any control to “off”, then remove plug from wall outlet.
12.Do not use appliance for other than intended use.
13.Save these instructions.
SAVE THESE INSTRUCTIONS

CAUTION
This appliance is for household use only. Any servicing, other than cleaning
and user maintenance, should be performed by an authorized service center.
Do not immerse machine in water. To reduce the risk of fire or electric shock,
do not disassemble the machine. There are no parts inside the machine
serviceable by the user. Repair should be done by authorized service personnel
only.
1. Check voltage to be sure that the voltage indicated on the nameplate
corresponds with your voltage.
2. Never use warm or hot water to fill the water tank. Use cold water only.
3. Keep your hands and the cord away from hot parts of the appliance during
operation.
4. Never clean with scrubbing powders or harsh cleaners. Simply use a soft
cloth dampened with water.
5. For optimal taste of your coffee, use purified or bottled water. Periodic
descaling is still recommended every 2-3 months.
6. Do not use caramelized or flavored coffee beans.
INSTRUCTIONS FOR THE POWER
SUPPLY CORD
A. A short power-supply cord (or detachable power-supply cord) is to be
provided to reduce risks resulting from becoming entangled in or tripping
over a longer cord.
B. Longer detachable power-supply cords or extension cords are available
and may used if care is exercised in their use.
C. If a long detachable power-supply cord or extension cord is used,
1. The marked electrical rating of the detachable power-supply cord or
extension cord should be at least as great as the electrical rating of the
appliance
2. If the appliance is of the grounded type, the extension cord should be a
grounding-type 3-wire cord, and
3. The longer cord should be arranged so that it will not drape over the
counter top or table top where it can be pulled on by children or tripped
over.

2 ENGLISH
Congratulations on your purchase of a Saeco Intelia EVO
Class fully automatic coee machine!
To fully benet from the support that Saeco oers, please
register your product at www.philips.com/welcome.
This user manual applies to HD8752 and HD8881.
The machine is made for preparing espresso coee using
whole coee beans and for dispensing steam and hot water.
In this user manual you will nd all the information you need
to install, use, clean and descale your machine.

3 ENGLISH
CONTENTS
IMPORTANT..................................................................................................... 4
Safety Instructions....................................................................................................................................4
Warning....................................................................................................................................................4
Cautions....................................................................................................................................................6
Compliance with Standards ......................................................................................................................7
INSTALLATION................................................................................................. 8
Product Overview......................................................................................................................................8
General Description...................................................................................................................................9
PREPARING FOR USE.......................................................................................10
Machine Packaging.................................................................................................................................10
Machine Installation ...............................................................................................................................10
USING THE MACHINE FOR THE FIRST TIME ........................................................12
Circuit Priming ........................................................................................................................................12
Automatic Rinse/Self-Cleaning Cycle.......................................................................................................13
Manual Rinse Cycle..................................................................................................................................14
Measuring and Programming Water Hardness........................................................................................16
“INTENZA+”Water Filter Installation ......................................................................................................17
Replacing the“INTENZA+”Water Filter...................................................................................................19
ADJUSTMENTS................................................................................................20
Saeco Adapting System...........................................................................................................................20
Adjusting the Ceramic Coee Grinder .....................................................................................................20
Adjusting the Aroma (Coee Strength)...................................................................................................21
Adjusting the Dispensing Spout..............................................................................................................22
Adjusting the Coee Length ...................................................................................................................23
ESPRESSO AND COFFEE BREWING ....................................................................24
Espresso and Coee Brewing Using Coee Beans....................................................................................24
Espresso and Coee Brewing Using Pre-Ground Coee...........................................................................25
CAPPUCCINO BREWING...................................................................................26
HOT WATER DISPENSING .................................................................................28
CLEANING AND MAINTENANCE ........................................................................30
Daily Cleaning of the Machine.................................................................................................................30
Daily Cleaning of the Water Tank.............................................................................................................31
Daily Cleaning of the Automatic Milk Frother..........................................................................................31
Weekly Cleaning of the Machine.............................................................................................................32
Weekly Cleaning of the Brew Group........................................................................................................33
Monthly Cleaning of the Automatic Milk Frother.....................................................................................35
Monthly Lubrication of the Brew Group ..................................................................................................40
Monthly Cleaning of the Brew Group with“Coee Oil Remover”.............................................................41
Monthly Cleaning of the Coee Bean Hopper..........................................................................................43
DESCALING.....................................................................................................44
PROGRAMMING..............................................................................................48
Adjustable Parameters............................................................................................................................48
Programming Example ...........................................................................................................................49
MEANING OF THE DISPLAY ICONS.....................................................................51
TROUBLESHOOTING........................................................................................54
ENERGY SAVING..............................................................................................56
Stand-by.................................................................................................................................................56
Disposal ..................................................................................................................................................56
TECHNICAL SPECIFICATIONS............................................................................57
WARRANTY AND SERVICE................................................................................57
Warranty.................................................................................................................................................57
Service ....................................................................................................................................................57
ORDERING MAINTENANCE PRODUCTS ..............................................................58

4 ENGLISH
IMPORTANT
Safety Instructions
This machine is equipped with safety features. Nevertheless
read the safety instructions carefully and only use the ma-
chine as described in these instructions to avoid accidental
injury or damage.
Keep this user manual for future reference.
The term WARNING and this icon warn against possible
severe injuries, danger to life and/or damage to the machine.
The term CAUTION and this icon warn against slight
injuries and/or damage to the machine.
Warning
• Connect the machine to a wall socket with a voltage
matching the technical specications of the machine.
• Do not let the power cord hang over the edge of a table or
counter, or touch hot surfaces.
• Never immerse the machine, mains plug or power cord in
water (danger of electrical shock).
• Never direct the hot water jet towards body parts: danger
of burns!
• Do not touch hot surfaces. Use handles and knobs.
• Remove the mains plug from the wall socket:
- If a malfunction occurs.
- If the machine will not be used for a long time.
- Before cleaning the machine.

5 ENGLISH 5
Pull on the plug, not on the power cord. Do not touch the
mains plug with wet hands.
• Do not use the machine if the mains plug, the power cord
or the machine itself is damaged.
• Do not make any modications to the machine or its
power cord. Only have repairs carried out by a service
centre authorised by Philips to avoid a hazard.
• The machine should not be used by children younger than
8 years old.
• The machine can be used by children of 8 years and
upwards if they have previously been instructed on the
correct use of the machine and made aware of the associ-
ated dangers or if they are supervised by an adult.
• Cleaning and maintenance should not be carried out by
children unless they are more than 8 years old and super-
vised by an adult.
• Keep the machine and its power cord out of reach of chil-
dren under 8 years old.
• The machine may be used by persons with reduced physi-
cal, sensory or mental capabilities or lacking sucient
experience and/or skills if they have previously been
instructed on the correct use of the machine and made
aware of the associated dangers or if they are supervised
by an adult.
• Children should be supervised to ensure that they do not
play with the machine.
• Never insert ngers or other objects into the coee
grinder.

6 ENGLISH
Caution
• The machine is for household use only and is not intended
for use in environments such as canteens, sta kitchens of
shops, oces, farms or other work environments.
• Always put the machine on a at and stable surface.
• Do not place the machine on hot surfaces, directly next to
a hot oven, heater or similar source of heat.
• Only put coee beans into the coee bean hopper. If
ground coee, instant coee or any other substance is put
in the coee bean hopper, it may damage the machine.
• Let the machine cool down before inserting or removing
any parts.
• Never use warm or hot water to ll the water tank. Use
cold non sparkling drinking water.
• Never clean with scrubbing powders or harsh cleaners.
Simply use a soft cloth dampened with water.
• Descale your machine regularly. The machine indicates
when descaling is needed. Not doing this will make your
appliance stop working properly. In this case repair is not
covered under your warranty!
• Do not keep the machine at temperature below 0 °C.
Residue water in the heating system may freeze and cause
damage.
• Do not leave water in the water tank when the machine
is not used over a long period of time. The water can be
contaminated. Use fresh water every time you use the
machine.

7 ENGLISH 7
Compliance with Standards
The machine complies with art.13 of the Italian Legislative
Decree dated 25 July 2005, no. 151“Implementation of the
Directives 2005/95/EC, 2002/96/EC and 2003/108/EC on the
restriction of the use of certain hazardous substances in electri-
cal and electronic equipment, as well as waste disposal”.
This machine complies with EU Directive 2002/96/EC.
This Philips appliance complies with all the applicable stand-
ards and regulations relating to the exposure to electromag-
netic elds.

8
INSTALLATION
Product Overview
10 11 22 12
5
6
7
8
9
15
16
17
21
27
28
29
24
25
26
30
18
20
23
14
13
19
12 34

9 ENGLISH 9
General Description
1. Grinder adjustment knob
2. Pre-ground coee compartment
3. Coee bean hopper
4. Coee bean hopper lid
5. Control panel
6. Coee dispensing spout
7. Cup holder grill
8. Full drip tray indicator
9. Drip tray
10. Coee grounds drawer
11. Brew group
12. Service door
13. Grease for the brew group - to be purchased separately
14. Power cord
15. Automatic Milk Frother
16. Suction tube
17. Water tank
18. Power cord socket
19. Steam wand + rubber grip for Automatic Milk Frother
20. Coee grinder adjustment key + Pre-ground coee measuring scoop
21. Cleaning brush - to be purchased separately
22. Coee residues drawer
23. Water hardness test strip
24. Espresso brew button
25. Coee brew button
26. Hot water/steam selection button
27. ON/OFF button
28. "Aroma" - Pre-ground coee button
29. "MENU" button
30. Descaling solution- to be purchased separately

10 ENGLISH
PREPARING FOR USE
Machine Packaging
The original packaging has been designed and constructed to protect the
machine during transport. We recommend keeping the packaging material
for possible future transport.
Machine Installation
1Remove the drip tray with grill from the packaging.
2Remove the machine from the packaging.
3For best use, it is recommended to:
• Choose a safe, level surface, where there will be no danger of over-
turning the machine or being injured.
• Choose a location that is suciently well-lit, clean and near an eas-
ily reachable socket.
• Allow for a minimum distance from the sides of the machine as
shown in the illustration.
4Insert the drip tray with grill into the machine. Make sure it is fully
inserted.
Note:
The drip tray collects the water that comes out of the dispensing spout
during each rinse/self-cleaning cycle, as well as coee that might be spilled
during beverage preparation. Empty and wash the drip tray daily and each
time the full drip tray indicator is raised.
Caution:
NEVER remove the drip tray when the machine has just been turned
on. Wait a couple of minutes for the machine to carry out a rinse/self-
cleaning cycle.

11 ENGLISH 11
5Remove the water tank.
6Rinse the water tank with fresh water.
7Fill the water tank with fresh water up to the MAX level and reinsert it
into the machine. Make sure it is fully inserted.
Caution:
Never ll the water tank with warm, hot, sparkling water or any other
liquid, as this may cause damage to the water tank and the machine.
8Remove the coee bean hopper lid and slowly pour the coee beans
into the coee bean hopper.
Note:
Do not pour too many coee beans into the coee bean hopper as this will
reduce the grinding performance of the machine.
Caution:
Only coee beans must be put into the coee bean hopper. Ground
coee, instant coee, caramelized coee or any other object may
damage the machine.
9Put the lid on the coee bean hopper.
10 Insert the plug into the socket located on the back of the machine.
11 Insert the plug at the other end of the power cord into a wall socket
with suitable power voltage.
1
2
1
2

12 ENGLISH
12 The display shows the stand-by icon.
BlackYellow
13 To turn on the machine simply press the “ ” button. The display indi-
cates that the circuit must be primed.
USING THE MACHINE FOR THE FIRST TIME
When using the machine for the rst time, the following activities need to
happen:
1) You need to prime the circuit;
2) The machine will perform an automatic rinse/ self-cleaning cycle;
3) You need to initiate a manual rinse cycle.
Circuit Priming
During this process fresh water ows through the internal circuit of the
machine and the machine warms up. This takes a few minutes.
1Place a container under the steam wand.

13 ENGLISH 13
2Press the “ ” button to start the cycle. The machine starts the auto-
matic priming of the circuit by dispensing some water through the
steam wand.
Yellow
3The bar under the icon shows the operation progress. When the pro-
cess is completed, the machine stops dispensing automatically.
4Then the display shows the machine warm-up icon.
Yellow
Automatic Rinse/Self-Cleaning Cycle
When warm-up is completed, the machine automatically performs a rinse/
self- cleaning cycle of the internal circuit with fresh water. This takes less
than a minute.
5Place a container under the coee dispensing spout to catch the small
amount of water which will be dispensed.
6The machine shows this display. Wait for the cycle to nish automati-
cally.
Note:
You can stop dispensing by pressing the“ ” button.
Yellow
Green
7When the above steps are complete, the machine shows this display.

14 ENGLISH
Manual Rinse Cycle
During this process you activate the coee brewing cycle and fresh water
ows through the steam/hot water circuit. This takes a few minutes.
1Place a container under the coee dispensing spout.
2Check that the machine shows this display.
Green
3Select the pre-ground coee brewing function by pressing the “ ”
button. The machine shows this display.
Note:
Do not add pre-ground coee into the compartment.
4Press the “ ” button. The machine starts dispensing water.
5When the dispensing has nished, empty the container. Repeat the
operations from step 1 to step 4 twice, then continue with step 6.
Green
6Place a container under the steam wand.

15 ENGLISH 15
Green
7Press the “ ” button. The following icon is displayed.
GreenRed
8Press the “ ” button to start dispensing hot water.
9Dispense water until the no water icon appears.
10 At the end, ll the water tank again up to the MAX level. Now the ma-
chine is ready for coee brewing.
The display to the left will be shown.
Note:
When you haven’t used the machine for 2 or more weeks, the machine
will automatically perform an automatic rinse/self-cleaning cycle after you
switch it on. Following this, you need to initiate a manual rinse cycle as
described above.
The automatic rinse/self-cleaning cycle starts automatically when the ma-
chine has been in stand-by mode or turned o for more than 15 minutes.
At the end of the cycle, it is possible to brew a coee.

16 ENGLISH
Measuring and Programming Water Hardness
Water hardness measuring is very important in order to dene the descal-
ing frequency and to install the “INTENZA+” water lter (for more detail on
the water lter, see next chapter).
To measure the water hardness follow the steps below:
1Immerse the water hardness test strip (supplied with the machine) in
water for 1 second.
Note:
The test strip can only be used for one single measurement.
2Wait for one minute.
23 4
ABC
Intenza Aroma System
Machine Water Hardness Setting
1
3Check how many squares have changed the colour to red and then
refer to the table.
Note:
The numbers on the water hardness test strip correspond to the water
hardness adjustment settings.
More precisely:
1 = 1 (very soft water)
2 = 2 (soft water)
3 = 3 (hard water)
4 = 4 (very hard water)
The letters correspond to the references that are located at the base of the
“INTENZA+” water lter (see next chapter).
Yellow
4Now you can program the water hardness setting. Press the
“”
button and scroll the pages by pressing the “ ” button until the fol-
lowing icon is displayed.
Note:
The machine is supplied with standard water hardness setting, suitable for
most types of water.

17 ENGLISH 17
Yellow
5Press the “ ” button to increase the value or the“ ” button to
decrease the value.
6Press the
“” button to conrm the setting.
7Press the “ ” button to exit the programming MENU. The machine
shows this display and is ready to brew.
Green
“INTENZA+”Water Filter Installation
We recommend installing the “INTENZA+” water lter as this prevents
limescale build-ups and preserves a more intense aroma to your espresso
coee.
The INTENZA+ water lter can be purchased separately. Please refer to the
maintenance product page in this user manual for further details.
Water is a crucial part of every espresso, so it’s most important to always
have it professionally ltered. Using the“INTENZA+” water lter will prevent
mineral deposits from building up and improve your water quality.
1Remove the small white lter from the water tank and store it in a dry
place.
2Remove the “INTENZA+” water lter from its packaging, immerse it ver-
tically (with the opening positioned upwards) in cold water and gently
press the sides so as to let the air bubbles out.

18 ENGLISH
4Insert the lter into the empty water tank. Press it down until it cannot
move any further.
5Fill the water tank with fresh water and reinsert it into the machine.
6Dispense all the water of the tank by using the hot water function (see
“Hot Water Dispensing” chapter).
7Fill the water tank again.
Yellow
8Press the “ ” button and scroll the pages by pressing the “ ” but-
ton until the following screen is displayed.
9Press the “ ” button to select “ON”and press the “ ” button to
conrm.
Yellow
10 To exit, press the “ ” button. The machine shows this display and is
ready to brew.
In this way the machine has been programmed to inform the user of
the need to replace the“INTENZA+” water lter.
Green
3Set the lter according to the measurements performed (see previous
chapter) and indicated on the base of the lter:
A = soft water – equals 1 or 2 on the test strip
B = hard water (standard) – equals 3 on the test strip
C = very hard water – equals 4 on the test strip