SAFAVIEH COUTURE Jaiden SFV4754-K User manual

CARE AND MAINTENANCE
NOTICE
Part List and Hardware List
SAFAVIEH
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or
staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening C O U T U R E
WARNING: DO NOT STAND ON BED
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
Dimensions: 81.5"WX86.6"DX45.9"H
Weight Capacity: 825 lbs
SFV4754-K
The legs and hardware are located inside the sideboard&slat boxs.
1X
B
1X
4X
C
2X
PIECE DESCRIPTION PICTURE
QUANTITY
2X
4X
A1X
D
E
F
G
18X
HW2
1X
Wrench
Headboard
Footboard
Sideboard
Bed Legs
Slat
Cross Slat
Support Leg for Cross Slat
Phillips Screws 4*2*40MM
HW1
HW3
HW4
HW5
12X
12X
1X
12X
HW6
Split Lock Washer(M8)
Flat Washer(M8)
Socket Screws 8*1.25*30MM
Allen Key

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any partismissing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15minutes.
Tools Required for Assembly (included): Allen key/wrench
PREARATION
Assembl the slat legs"H" with part ofAssembl the slat legs"H" with part ofAssembl the slat legs"H" with part of Assembl the slat legs"H" with part of
STEP4 Attach the STEP3 part with STEP1 by sliding
the iron plates onto the bolts. The metal card should
be alignment card slot when install it,then press it
lightly.Reminder:If it's hard to install,you can rotate out
the bolts first,and then put the iron plates here before
tighten.
Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
STEP4 Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
Rotate the slat legs H to the middle rod of slatRotate the slat legs H to the middle rod of slat STEP5
Secure the slat with screw HW1 by using
wrench HW6.There are totally 9 holes on slat
to make sure it stable, it's shown in step 4
F
E
G
The legs and hardware are located inside the sideboard&slat boxs.
X2
D
X2
A
HW4
HW5
HW2
HW3
STEP1 Attach bed legs D with headboard
A by using Allen key HW5 and hardware
HW2,HW3,HW4 as shown, tightenuntil
secure.
and secure the slat with screw HW1 by using
wrench HW2.There are totally 9 holes on slat
to make sure it stable, it's shown in step 3.
Secure the sideboard with headboard with HW1
STEP6 Secure the slat with screw HW1
by using wrench HW6.There are totally 12
holes on slat to make sure it stable, it's
shown in step 5.
STEP5 Rotate the slat legs G to the middle
rod of the slat F. Put it inside the middle of
the bed. And then, smooth the slat E inside
the bed.
HW1
HW6
D
B
C
It's finished as shown,Your Bed is
ready for use.
HW6
HW6
STEP2 Attach the sideboard Cwith
footbaord Bby sliding the iron plates onto
the bolts. The metal card should be alignment
card slot when install it,then press it lightly.
STEP3 Attach bed legs D with STEP2 part
by using Allen key HW5 and hardware
HW2,HW3,HW4 as shown, tightenuntil
secure.
HW4
HW5
HW2
HW3
HW1
HW6
STEP7 Secure the sideboard with headboard
by using screw HW1 and wrench HW6. There
are three holes here on each side to make
sure it stable enough.

CARE AND MAINTENANCE
NOTICE
Part List and Hardware List
SAFAVIEH
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or
staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening C O U T U R E
WARNING: DO NOT STAND ON BED
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
Dimensions: 65.7"WX86.6"DX45.9"H
Weight Capacity: 825 lbs
SFV4754-Q
1X
B
1X
4X
C
2X
PIECE DESCRIPTION PICTURE
QUANTITY
1X
2X
A1X
D
E
F
G
15X
HW2
1X
Wrench
Headboard
Footboard
Sideboard
Bed Legs
Slat
Cross Slat
Support Leg for Cross Slat
Phillips Screws 4*2*40MM
HW1
HW3
HW4
HW5
12X
12X
1X
12X
HW6
Split Lock Washer(M8)
Flat Washer(M8)
Socket Screws 8*1.25*30MM
Allen Key
The legs and hardware are located inside the sideboard&slat boxs.

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any partismissing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15minutes.
Tools Required for Assembly (included): Allen key/wrench
PREARATION
Assembl the slat legs"H" with part ofAssembl the slat legs"H" with part ofAssembl the slat legs"H" with part of Assembl the slat legs"H" with part of
STEP4
Attach the STEP3 part with STEP1 by sliding
the iron plates onto the bolts. The metal card should
be alignment card slot when install it,then press it
lightly.Reminder:If it's hard to install,you can rotate out
the bolts first,and then put the iron plates here before
tighten.
Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
STEP4 Rotate the slat legs H to the middle rod of slat
G. Put it inside the middle of the bed, And
then, smooth the slat F inside the bed
Rotate the slat legs H to the middle rod of slatRotate the slat legs H to the middle rod of slat STEP5
Secure the slat with screw HW1 by using
wrench HW6.There are totally 9 holes on slat
to make sure it stable, it's shown in step 4
F
GE
The legs and hardware are located inside the sideboard&slat boxs.
D
X2
A
HW4
HW5
HW2
HW3
STEP1 Attach bed legs D with headboard
A by using Allen key HW5 and hardware
HW2,HW3,HW4 as shown, tightenuntil
secure.
and secure the slat with screw HW1 by using
wrench HW2.There are totally 9 holes on slat
to make sure it stable, it's shown in step 3.
Secure the sideboard with headboard with HW1
STEP6 Secure the slat with screw HW1
by using wrench HW6.There are totally 9
holes on slat to make sure it stable, it's
shown in step 5.
STEP5 Rotate the slat legs G to the middle
rod of the slat F. Put it inside the middle of
the bed. And then, smooth the slat E inside
the bed.
HW1
HW6
D
B
C
It's finished as shown,Your Bed is
ready for use.
HW6
HW6
STEP2 Attach the sideboard Cwith
footbaord Bby sliding the iron plates onto
the bolts. The metal card should be alignment
card slot when install it,then press it lightly.
STEP3 Attach bed legs D with STEP2 part
by using Allen key HW5 and hardware
HW2,HW3,HW4 as shown, tightenuntil
secure.
HW4
HW5
HW2
HW3
HW1
HW6
STEP7 Secure the sideboard with headboard
by using screw HW1 and wrench HW6. There
are three holes here on each side to make
sure it stable enough.