SAFAVIEH COUTURE Coraline SFV4748 User manual

CARE AND MAINTENANCE
NOTICE
B
PIECE DESCRIPTION PICTURE QUANTITY
SAFAVIEH
ASeat 1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or
staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
C O U T U R E
WARNING: DO NOT STAND ON OTTOMAN
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
The legs and hardware are located inside the carton.
Part List and Hardware List
HW4
HW3
Flat Washer(M8)
HW2
HW1 Split Lock Washer(M8)
C
Middle Rod
D
Side Leg
Side Leg
HW5
HW6
Socket Screws 8*1.25*65MM
Allen key
2X
12X
2X
14X
12X
2X
2X
1X
1X
SFV4748
Dimensions:20"W*20"D*17.72"H
Weight Capacity: 275 lbs
Plastic Washer(M8)
Socket Screws 8*1.25*40MM

STEP4 CONNECT THE MIDDLE ROD WITH
SIDE LEGS SHOWN IN THE PICTURE.
PREPARATION
STEP3 INSERT THE LEGS AND SCREW IN THE
SCREWS BUT DON'T TIGHTEN COMPLETELY.REPEAT
THE SAME STEPS FOR THE OTHER THREE LEGS
PREARATION
A
HW2 HW1 HW4/HW5
STEP5 PUT THE OTTOMAN UPRIGHT AND MAKE SURE
ALLLEGS ARE LEVEL, THEN FIRMLY TIGHTEN BOLTS
WITHALLEN KEY WHILE THE OTTOMAN IS UPRIGHT AS
PICTURED ABOVE.
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any partismissing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
A
B
HW6
STEP1 THE LEGS ARE PACKED TOGETHER WITH
HARDWARE,OPEN TO TAKE THE LEGS AND
HARDWARE.
STEP2 PUT THE WASHERS ON THE SCREW IN
THE ORDER SHOWN IN THE PICTURE
HW3
HW2
HW5
HW2 HW1 HW4
HW6
The legs and hardware are located inside the carton.
D
B
C
C
B
C B
C